1 / 8

Tutorial: Handlebars

Tutorial: Handlebars. Chapter 5. 3-D Sketches. Lines can be drawn in any of the three principal planes Use tab to toggle between XY, YZ, and ZX planes. Path Sketch. Lines drawn and dimensioned in ZX-plane:. Path Sketch (cont.). Lines drawn and dimensioned in YZ-plane:. Path Sketch (cont.).

aradia
Download Presentation

Tutorial: Handlebars

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tutorial: Handlebars Chapter 5

  2. 3-D Sketches • Lines can be drawn in any of the three principal planes • Use tab to toggle between XY, YZ, and ZX planes INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

  3. Path Sketch • Lines drawn and dimensioned in ZX-plane: INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

  4. Path Sketch (cont.) • Lines drawn and dimensioned in YZ-plane: INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

  5. Path Sketch (cont.) • Sketch fillets added: INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

  6. Profile Sketch INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

  7. Swept Base INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

  8. Mirrored Feature INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009

More Related