1 / 89

I.C. ENGINES

I.C. ENGINES. LECTURE NO: 11 (21 Apr 2014). Air Required to Burn Fuel. 1 kg of H requires 8 kg O 1 kg of C requires 2.66kg O 1 kg of S requires 1kg O 1 kg of O is contained in 4.35kg air. Problem No 1.

ardith
Download Presentation

I.C. ENGINES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. I.C. ENGINES LECTURE NO: 11 (21 Apr 2014)

  2. Air Required to Burn Fuel • 1 kg of H requires 8 kg O • 1 kg of C requires 2.66kg O • 1 kg of S requires 1kg O • 1 kg of O is contained in 4.35kg air

  3. Problem No 1 • A certain petrol consists of 84 % C and 16 % H by mass. What mass of air is required for complete combustion?

  4. Problem No 1 • Data • Carbon = 84 % C by mass • Hydrogen = 16 % H by mass. • To Find • Mass of air is required for complete combustion? • Solution • O required to burn 1 kg of C = 2.66 kg • O required to burn 0.84 kg of C = 0.88 x 2.66 kg

  5. Problem No 1 • Solution • O required to burn 1 kg of H = 8 kg • O required to burn 0.16 kg of H = 0.16 x 8 kg • Therefore • O required = (0.84 x 2.66)kg + ( 0.16 x 8)kg • Therefore • Air required = (0.84 x 2.66)kg + ( 0.16 x 8)kg x 4.35 kg • 15 .268 kg

  6. Problem No 2 • A fuel oil contains, by mass, 87 % C, 11 % H, 1 % S and 1 % O. What mass of air is required for complete combustion?

  7. Problem No 2 • Data • Carbon = 87 % C by mass • Hydrogen = 11 % H by mass • Sulphur = 1 % S by mass • Oxygen = 1 % O by mass • To Find • Mass of air is required for complete combustion? • Solution • O required to burn 1 kg of C = 2.66 kg • O required to burn 0.87 kg of C = 0.87 x 2.66 kg

  8. Problem No 2 • Solution • O required to burn 1 kg of H = 8 kg • O required to burn 0.11 kg of H = 0.11 x 8 kg • O required to burn 1 kg of S = 1 kg • O required to burn 0.11 kg of S = 0.11 x 1 kg • Fuel oil supplies 0.01 kg of O /kg of fuel • Actual mass of O required = 3.204 kg - 0.01kg • = 3.194 kg • Mass of Air required = 3.194 x 4.35 kg • = 13.894 kg • Air fuel ratio by mass is 13.894 to 1

  9. Problem No 3 • What is mass of air is required to burn complete 1 kg of benzole C6 H6 ?

  10. Problem No 3 • Data • Benzole C6 H6 • To Find • Mass of air is required for complete combustion? • Solution • Molecular mass of Benzole C6 H6 • (12 x 6) + ( 1 x 6) = 72 + 6 = 78 • % of C by mass = (72/ 78) x 100 = 92 • % of H by mass = (6/ 78) x 100 = 8

  11. Problem No 3 • O required C = 0.92 x 2.66 = 2.45 kg • O required H = 0.08 x 8 kg = 0.64 • Total = 3.09 kg • Air required = 3.09 x 4.35 kg • = 13.4 kg • Air fuel ratio by mass is 13.4 to 1

  12. Problem No 4 • What is mass of air is required to burn complete 1 kg of ethyl alcohol C2 H6O ?

  13. Problem No 4 • Data • ethyl alcohol C2 H6O • To Find • Mass of air is required for complete combustion? • Solution • Molecular mass of ethyl alcohol H2 C6O • ( 12 x 2) + (1 x 6) + ( 16 x 1) = 46 • % of C by mass = (24/ 46) x 100 = 52 • % of H by mass = (6/ 46) x 100 = 13 • % of O by mass = (16/ 46) x 100 = 35

  14. Problem No 4 • Total = 2.423 kg • The fuel supplies 0.35 kg of O per kg of fuel • = 2.423 - 0.35 = 2.073 kg • Air required = 2.073 x 4.073 kg = 9 kg • Air fuel ratio by mass is 9 to 1

  15. LUBRICATION SYSTEM

  16. LUBRICATION SYSTEM • Lubrication is the introduction of a substance, called a lubricant (e.g. oil to create an oil film, between two moving contact surfaces, to reduce friction. • This reduction of friction greatly reduces the wear of the surfaces and thus lengthens their service life. • It also reduces the energy required for the movement. • Lubrication is important in all moving parts of the vehicle but the engine has the greatest need.

  17. LUBRICATION SYSTEM • Under a microscope, even the smoothest engine components have a surface that looks very rough. • If these surfaces made contact they would rub together, overheat and destroy themselves. • To prevent this happening, engines have a lubrication system that pumps or drips a constant supply of oil on all the moving metal components.

  18. LUBRICATION SYSTEMOTHER FUNCTIONS • Although the BASIC FUNCTION of a lubricant is to reduce friction and wear. • It carries off generated heat • It helps to form a gas-tight seal between piston rings and cylinders. • It also carries away harmful combustion waste products. • Lubrication helps to control corrosion by coating parts with a protective film. • A detergent added to the lubricant helps to removes sludge deposits.

  19. LUBRICATION SYSTEM

  20. The Lubrication System (Reasons for) • To separate the moving parts of the engine, to prevent excessive wear and heat build up caused by friction, without this, the engine components would get so hot, they could start to melt and stick to together (seized engine) • To protect the engine components from acids formed from the burning of the fuel.

  21. Purpose of Lubrication System • Lubricate Reduces Friction by creating a thin film(Clearance) between moving parts (Bearings and journals)

  22. Purpose of Lubrication System • Seals The oil helps form a gastight seal between piston rings and cylinder walls (Reduces Blow-By) Internal oil leak (blow-by) will result in BLUE SMOKE at the tale pipe.

  23. Purpose of Lubrication System • Cleans As it circulates through the engine, the oil picks up metal particles and carbon, and brings them back down to the pan.

  24. Purpose of Lubrication System • Cools Picks up heat when moving through the engine and then drops into the cooler oil pan, giving up some of this heat.

  25. Purpose of Lubrication System • Absorbs shock When heavy loads are imposed on the bearings, the oil helps to cushion the load. • Absorbs Contaminants The additives in oil helps in absorbing the contaminants that enter the lubrication system.

  26. VISCOSITY Viscosity is a measure of oil’s resistance to flow. • A low viscosity oil is thin and flows easily • A high viscosity oil is thick and flows slowly. • As oil heats up it becomes more • viscous (Becomes thin)

  27. VISCOSITY • If the oil is too thin(has very low viscosity) it will be forced • out from between the moving parts, resulting in rapid wear. • If the oil is too thick(has very high viscosity) it will flow very • slowly to engine parts, especially when the engine and the oil • are cold, resulting in rapid wear. Viscosity Indexis the measure of how much the viscosity of an oil changes with temperature. (20 W) Viscosity number is set by SAE (Society of Automotive Engineers)

  28. VISCOSITY • Single viscosity oils SAE 5W, SAE 10W (Winter) and • SAE 20, SAE30 … (Summer) • Multiple viscosity oils SAE 10W-30. • This means that the oil is same as SAE 10W when cold • and SAE30 when hot. The higher the number the higher the viscosity(thickness) of oil.

  29. Properties of oil • Corrosion and Rust Inhibitor: Displaces water from • metalsurfaces, to prevent corrosion. • Foaming Resistance: Rotating crankshaft tends to cause • bubbles (Foam) in the oil and bubbles in oil will reduce the • effectiveness of oil to lubricate. • Synthetic Oils: Made by chemical process and do not • necessarily come from petroleum.

  30. Service Rating of Oil SA, SB, SC, SD,…..SJ SA and SB oils are not recommended for use in today’s Automobile engines.

  31. A.P.I. Ratings • SA Straight mineral oil no additives. • SB 1930’s motor oil with some detergent. • SC 1950’s oil more additives. • SD 1960’s enter multi-viscosity oils. • SE 1970’s emission controls make heat is problem. • SF 1980’s improves fuel economy. • SG Late 1980’s wider viscosity ranges. • SH 1990’s great stuff. • SJ Late 1990’s • SL 2000’s • SM Current

  32. Motor Oil Characteristics • Oil Viscosity/SAE • Ease which oil flows • S.A.E Rating (Society of Automotive Engineers) • Service Rating/API • Oil Quality • A.P.I. (American Petroleum Institute) • Other Fluids & Lubricants

  33. Oil Viscosity Chart

  34. Parts Oil Pumps Driven by camshaft, crankshaft (Rarely rebuild by an auto technician) • Rotor Pump(Two star shaped rotors • pumps the oil) • Gear oil Pump

  35. Parts Oil Pan Stores the oil and helps in cooling the oil Pan gasket splits if over tightened.

  36. Parts Pressure Relief Valve to prevent the buildup of high Pressure (Causes the oil filter to bulge, but not a common problem). Good oil pressure is 40-60 psi

  37. Parts Oil Pressure Indicator • Light or a Gauge The light turns on or gauge reads low when the pressure drops below 10psi. • Good oil pressure is 40-60 psi. • Common causes of low oil pressure are: • Low oil level • Worn out pump Low oil pressure Safety system will shuts down the car by cutting the ignition System(Spark).

  38. Parts Oil Filter filters the oil Some particles are too small for the filter Element(paper in the filter ) to trap.

  39. Parts Oil Galleries Deliver the oil to top end and returning it To the oil pan.

  40. Parts Positive Crankcase ventilation Valve • Pollution prevention • Blow-by back into the intake • Prevent sludge in the engine.

  41. Parts Oil Pressure sending unit electrically sends the signal to the Light or Gauge mounted on the dash. If the wires get shorted the light will come on or the gauge will read high.

  42. OIL CHANGE • Every 5000Km • 3 months Ignoring regular oil change intervals will shorten engine life and performance.

  43. Selecting Motor Oil • Pick proper viscosity as recommended by manufacturer. • Pick proper service rating as recommended by the manufacturer.

  44. Automatic Transmission Fluid(ATF) • Has red color to identify it from motor oil. • Several kinds: • Dexron/Mercon • Type FA

  45. Gear Lube • Used in manual transmissions and differentials on rear drive cars. • Heavy viscosity 90W. • Looks like motor oil but smells real bad!

  46. Chassis Grease • Conventional type of petroleum grease. • Grease steering and suspension parts.

  47. Other Types of Grease • Lithium grease or white lube. • Used on mis. parts.

  48. Other Lubricants • WD-40 is a light oil with graphite. • Liquid wrench is a penetrating oil for dry and rusted bolts.

  49. Non Petroleum Lubricants • Silicone spray is for rubber and plastic parts. Doesn’t work well on metal. • Brake cleaner is like dry cleaning fluid. Cleans off grease and evaporates in seconds.

  50. Other Useful Fluids • Carburetor choke and throttle body cleaner. Contains toluene. • Starting fluid. Contains ether.

More Related