1 / 33

WireSpan 5150

WireSpan 5150. WireSpan 5150. 1. 2. 3. 4. 5. 6. 7. 8. WireSpan 5150. Rear Panel. WireSpan 5150. Description Switch Power On / Off AC Power DC Power Connecting the Control port (CID) Ethernet port Connections V.35 Port Connections E1 Link Connections G.SHDSL Line Connections.

arista
Download Presentation

WireSpan 5150

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. WireSpan 5150

  2. WireSpan 5150

  3. 1 2 3 4 5 6 7 8 WireSpan 5150 Rear Panel

  4. WireSpan 5150 Description • Switch Power On / Off • AC Power • DC Power • Connecting the Control port (CID) • Ethernet port Connections • V.35 Port Connections • E1 Link Connections • G.SHDSL Line Connections

  5. WireSpan 5150 Control Module Front Panel 3 1 2 5 4

  6. WireSpan 5150 Description • RIGHT ( Push button) : Used to scroll among the available options displayed on the LCD or jump to right screen by menu-tree • LEFT ( Push button ) : Used to scroll among the available options displayed on the LCD or jump to right screen by menu-tree • EXIT ( Push button ) : Used to back prevision screen on the LCD • ENTER ( Push button ) : Used to confirm the changes made in the CM operation or entry in next level menu-tree screen on the LCD • LCD : Used to display messages and status information. Thedisplay contains 2 rows of 16 characters each

  7. WireSpan 5150 LEDs 1 2 3 4 5 6 7 8

  8. WireSpan 5150 Description • PWR Lights when system power is ready • L00P Lights when the DSL loop circuitsget synchronization to the incoming signal. • SYNLight when DTE interface receive signal synchronization. • REMLight when remote modem alarms. • LOCLight when local device alarms. • ACT Light when in packets forward process • LINKLight when Ethernet interface is link-up • TSTLights when a test is activated

  9. WireSpan 5150 Device Main Menu

  10. WireSpan 5150 Application

  11. WireSpan 5150 Feature • Compliance with ITU-T G.991.2 (G.SHDSL) • Line Type 2W and 4W • Support auto data rates adaptation between 64K and 4608K (N=1-72 ) • V.35, T1/E1 & T1/E1 Fractional interface, Ethernet interface • Full function configuration with remote configuration • Built-in test pattern generator/detector • SNMP management through Ethernet LAN port • Software flash upgradeable • Support Multi service Function ( E1 and V.35 ) • Support Converter Function ( E1 and V.35 ) • Redundant Power Supply • Transmit Power Adjustment • Wetting Current

  12. WireSpan 5150 Installations and Setup • System configure by using an ASCII terminal • System configure by TELNET • System configure by LCD

  13. WireSpan 5150 Control from CID Port

  14. WireSpan 5150 Main Menu

  15. WireSpan 5150 Main  Status

  16. WireSpan 5150 Main  Configuration

  17. WireSpan 5150 Main  Profile

  18. WireSpan 5150 Main  Diagnostic

  19. WireSpan 5150 Configure byLCD displays

  20. WireSpan 5150

  21. WireSpan 5150

  22. WireSpan 5150

  23. WireSpan 5150

  24. WireSpan 5150

  25. WireSpan 5150 Requirement of Firmware upgrade • Use Ethernet port to upgrade firmware • Use TFTP of window to upgrade firmware • Check IP address of MODEM default is 192.168.5.105. • Set the computer IP address at same segment. • Connect PC with MODEM.

  26. WireSpan 5150 Requirement of Firmware upgrade • Under Windows command prompt, enter command: “ping 192.168.5.105”

  27. WireSpan 5150 Requirement of Firmware upgrade • If machine does response to ping, go directory that keep file firmware “all.bin”.

  28. WireSpan 5150 Requirement of Firmware upgrade • If machine does response to ping, enter next command: “tftp -i 192.168.5.105 put all.bin”

  29. WireSpan 5150 Lab Test • Test Speed • 64 Kbps • 1024Kbps • 2048Kbps

  30. WireSpan 5150 Troubleshooting

  31. WireSpan 5150

  32. WireSpan 5150

  33. Question & Answer

More Related