300 likes | 568 Views
802.11a/n Wireless LAN Outdoor AP. WNAP-7300. Icon1. Icon2. Icon3. Icon4. Icon5. Presentation Outline. Product Position Product Overview Product Features Applications Web UI Comparison – Internal Comparison – External Appendix. 802.11a/n. 802.11b/g/n. 802.11a/b/g. 2T2R 300Mbps.
E N D
802.11a/n Wireless LAN Outdoor AP WNAP-7300 • Icon1 • Icon2 • Icon3 • Icon4 • Icon5
Presentation Outline • Product Position • Product Overview • Product Features • Applications • Web UI • Comparison – Internal • Comparison – External • Appendix
802.11a/n 802.11b/g/n 802.11a/b/g 2T2R 300Mbps 802.11a 802.11b/g Product Position • PLANET Outdoor Wireless LAN Product Classification WNAP-7300 WNAP-7200 (1T1R/ 150Mbps) WNAP-6300 (1T1R/ 150Mbps) MAP-3020 WAP-8000 WAP-7000 WAP-6000 WAP-6100 WAP-6200
Product Overview • Housing Design • IP-55case for water-proof and dedicated outdoor usage • Built-in dual polarity 5GHz 16dBi patch antenna, characteristic as table below • Reserve SMA Connectorx 2, switchable by Web UI, i.e either manual antennas or 16db antenna
Product Overview • Internal Construction • Power On/Off Button • Reset Button • RJ-45 Port x 2 (LAN1 & LAN2) • RP-SMA Connector x 2 • Mounting Kit • WNAP-7300 fixing to the pole LAN2 - Secondary PoE out pass-through (power enabled by Web UI) LAN1 - Main Passive PoE 15V~18V RP-SMA Connector RP-SMA Connector Reset Button Power On/Off Button Mounting Kit
Product Overview • ProprietaryPoE interface • Offer Power Supply (DC) with PoE(Power over Ethernet) injector • Up to 100 meters UTP wiring 15V 0.8A Passive PoE Up to 100m UTP wiring
Product Overview • Installation • STEP 1:Loosen the screw with a Phillips screwdriver. Grab the cover and pull it out as the figure shown below. The screw
Product Overview • Installation • STEP 2:Plug a standard Ethernet cable into the RJ45 port labeled “LAN 1”, and press the black PWR button beside the LAN 1 Ethernet port. • STEP 3:Attach and fasten the removable cover to the bottom of the WNAP-7300.
Complete Set Product Overview • Installation Diagram • Strongly suggestusingSTPcable (part no. CB-STP-25) • Consider to installELA-100 avoiding thunder strike • Avoiding RJ45 connector from water • Fix WNAP-7300 in optimum location
Product Features • Wireless bridge Max connection distance up to10Km in the clear Line of Sight
Product Features • Multiple-Operation Mode • Router Mode / WISP Mode • Bridge Mode • Router and AP Application • IGMP Snooping and 802.1D (Spanning Tree)support • Firewall, DHCP Server, WMM support • Power over Ethernet design (with proprietary injector) • IP-55 Enclosure • Wide range of temperature tolerance (-20~70 degree C) for low or high temperature environment
Product Features • RF interface • IEEE 802.11a/n standards compliant • High output power up to 400mW with multiple adjustable transmit power control • Data rate up to 300Mbps with 802.11n mode • Built-in 16dBi directional antenna (dual-polarity) • Reserve SMA Connectorallows for stronger antenna upgrades
Product Features • Wireless • Operation Mode • AP, Client, Client CPE (WISP), WDS, AP+WDS • WDS up to 4 remote APs • SSID Broadcast & Hide • Wireless Security • 64/128/152-bit WEP, 802.1X, WPA, WPA2, WPA-PSK(TKIP), WPA2-PSK(AES) Authentication • Access Control up to 32 STAs • Output Power Control (Full, 50%, 25%, 12.5%, Min)
Product Features • Router/Firewall/Management • Firewall supports IP/Port Filtering • Support DMZ • Up to 2048 NAT Sessions • Remote Management • Web, SNMPv2/ v3, Telnet, FTP • Firmware Upgrade • Web, FTP • Backup/Restore Configuration • Reset to Factory Default • System Logs & Ping Watchdog
Applications – PtMP Bridge • Typical Application –Point to Multiple Point Bridge Mode
Applications - WISP • WISP Application WNAP-7300 WISP mode System: Router mode Wireless RF: AP-client mode Up to 10km No cable implement Wireless connection for Internet access WISP Provider
Applications - WDS • WDS Bridge Application WNAP-7300 WNAP-7300 Site A Site B Up to 10 Km Data communication between A and B Data communication between A and B
Applications – Wireless Extension 5GHZ 10km
Web UI Clear & Concise System Status Web Login
Web UI - Status Network Flow Information Associated Client List Bridged AP List ARP Table DHCP Client List
Multiple Network Mode Support RADIUS server’s Settings Multiple-WAN type support Time & NTP settings DMZ Support Firewall Supports:Source Destination IP/Port Filtering Gateway Support in Bridge mode STP Support Web UI - Setup
Web UI - Management SNMP v2, v3 Local / Remote mgt. Firmware Upgrade: Web, FTP(Command line) Backup/Restore configuration Reset to Factory Default S/W Reboot Password Settings
ELA-100 WL-LTN Appendix • Related Products • CB-STP-25 (25M STP Cat5 Cable) • ELA-100 (Ethernet Lightning Arrest Box) • Accessories • ANT-FP18A • ANT-OM10A • ANT-SE17A • WL-LTN (Lightning Arrester) 5GHz Antenna
Target Market Telecom to Business Telecom to Residential Building to Building Public Area Access Hotel/Resort/Campus Small Wireless ISP Benefit Flexible in installation Flexible in wireless coverage Saving wiring cost Wireless Mobility Target Customer Who buy the products WAP-6000 WAP-6100 WAP-6200 WAP-7000 WAP-8000 WNAP-7200 WNAP-6300 MAP-2000/3000 Series Who ever ask about WISP Outdoor Access Point Low cost Access Point Appendix