1 / 23

NCDOT Implementation of OpenRoads Designer

NCDOT Implementation of OpenRoads Designer. Agenda. Overview/Orientation to ORD Unit Workspace New updatews for Connect Unit Workspace Configuration Cells, levels, linestyles Element templates / Features (replaces Geopak tools such as D&C Manager) Drawing Scale

arron
Download Presentation

NCDOT Implementation of OpenRoads Designer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NCDOT Implementation of OpenRoads Designer

  2. Agenda • Overview/Orientation to ORD • Unit Workspace • New updatews for Connect • Unit Workspace Configuration • Cells, levels, linestyles • Element templates / Features (replaces Geopak tools such as D&C Manager) • Drawing Scale • Migration Plan • Hands on Workshop • Goal: Establish Dgnlibs and cells for your Unit ORD Workspace

  3. Connection Client Type in email address and hit “tab” or click on Password field ..

  4. How do I just go into SS4?

  5. NCDOT CADD Workspaces SS2 SS4 ORD NEW ORD Only

  6. Separation of Workspaces Legacy OpenRoads

  7. UpdateWs for CONNECT https://connect.ncdot.gov/resources/CADD/Pages/OpenRoadsDesigner.aspx Note: works as expected in IE and Edge, but Chrome may not work as expected .. It downloads the program

  8. Configuration for NCDOT 1 Copy the WorkspaceSetup.cfg to the C:\ProgramData\Bentley\OpenRoads Designer CE\Configuration folder. Replace the file that is currently in this folder 2

  9. CADD Standards for ORD Features Definition Features Symbology Element Template Levels, Cells

  10. New Scaling Method OpenRoads Legacy Vs Ratio (50:1) Multiplication factor: 50x Scale = (50 x 12) Multiplication factor : 600x For ORD Workspace, all Cells and linestyles that are scalable must be reduced by a factor of 12

  11. OpenRoads Designer • Performance/Speed issues • Memory intensive • Some SUDA processing seems very slow • Our going forward CADD equipment: • I7-6700 Processor • 32 GB DDR4 • Solid State Drives • Release Schedule • Quarterly Updates from Bentley • Update 3 released in April • Backwards compatibility of files • 2018 Release 2 (last week !) Other Agency Adoption 2018 – None 2019 – 1st Quarter PennDOT Georgia DOT Illinois DOT NCDOT Summer Florida South Carolina Texas

  12. NCDOT Implementation Plan Details • Pilot projects • Integrated with ProjectWise • March 2019 Implementation • Tentative • Will nearly complete projects remain in SS2/SS4? • Manday estimates • Transition Period (Dual Versions) • How long ? • Windows 7 support ends January 2020 • SS2 on Windows 10 • Training • Bentley LEARN

  13. Hands On Workshop • Update CONNECT Workspace https://connect.ncdot.gov/resources/CADD/Pages/OpenRoadsDesigner.aspx

  14. Hands On Workshop • Open ORD / Workspace / Workset

  15. Hands On Workshop • Seed Files – NCDOT 2d and 3d

  16. Hands On Workshop • Copy dgnlibs from current SS4 workspace to ORD workspace • Copy cells from current SS4 workspace to ORD workspace • Identify cells that need to be scaled • Convert cells to drawing scale (reduce by factor of 12) • Set model property toggle for annotation cell • Set active scale to 1/12 (increase accuracy to 8 decimal places) • Apply VBA • Place cell in (ORD) dgn file. • Set drawing scale to 1”=50’ • Place cell (ensure annotation lock is on) • Reference a (SS4) dgn file to it and compare • Test ability to push up to ORD Workspace

  17. Hands On Workshop • Copy dgnlibs from current SS4 workspace to ORD workspace

  18. Hands On Workshop • Copy dgnlibs from current SS4 workspace to ORD workspace • Copy cells from current SS4 workspace to ORD workspace

  19. Hands On Workshop • Copy dgnlibs from current SS4 workspace to ORD workspace • Copy cells from current SS4 workspace to ORD workspace • Identify cells that need to be scaled

  20. Hands On Workshop • Copy dgnlibs from current SS4 workspace to ORD workspace • Copy cells from current SS4 workspace to ORD workspace • Identify cells that need to be scaled • Convert cells to drawing scale (reduce by factor of 12) • Set model property toggle for annotation cell • Set active scale to 1/12 (increase accuracy to 8 decimal places) • Apply VBA

  21. Hands On Workshop • Copy dgnlibs from current SS4 workspace to ORD workspace • Copy cells from current SS4 workspace to ORD workspace • Identify cells that need to be scaled • Convert cells to drawing scale (reduce by factor of 12) • Set model property toggle for annotation cell • Set active scale to 1/12 (increase accuracy to 8 decimal places) • Apply VBA • Test! Place cell in (ORD) dgn file. • Set drawing scale to 1”=50’ • Place cell (ensure annotation lock is on)

  22. Hands On Workshop • Copy dgnlibs from current SS4 workspace to ORD workspace • Copy cells from current SS4 workspace to ORD workspace • Identify cells that need to be scaled • Convert cells to drawing scale (reduce by factor of 12) • Set model property toggle for annotation cell • Set active scale to 1/12 (increase accuracy to 8 decimal places) • Apply VBA • Place cell in (ORD) dgn file. • Set drawing scale to 1”=50’ • Place cell (ensure annotation lock is on) • Reference a (SS4) dgn file to it and compare

  23. Hands On Workshop • Copy dgnlibs from current SS4 workspace to ORD workspace • Copy cells from current SS4 workspace to ORD workspace • Identify cells that need to be scaled • Convert cells to drawing scale (reduce by factor of 12) • Set model property toggle for annotation cell • Set active scale to 1/12 (increase accuracy to 8 decimal places) • Apply VBA • Place cell in (ORD) dgn file. • Set drawing scale to 1”=50’ • Place cell (ensure annotation lock is on) • Reference a (SS4) dgn file to it and compare • Test ability to push up to ORD Workspace

More Related