1 / 13

Wideband Communications

Wideband Communications . Lecture 24-27: Ultra Wideband Communications Aliazam Abbasfar. Outline. What’s UWB ? Impulse Radio. UWB. Very huge band allocated for commercial use 7.5 GHz (3-10.5 GHz) BW should be > 500 MHz Power is very limited Total < 0.5 mW Density < mask

asher
Download Presentation

Wideband Communications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Wideband Communications Lecture 24-27: Ultra Wideband Communications Aliazam Abbasfar

  2. Outline • What’s UWB ? • Impulse Radio

  3. UWB • Very huge band allocated for commercial use • 7.5 GHz (3-10.5 GHz) • BW should be > 500 MHz • Power is very limited • Total < 0.5 mW • Density < mask • Applications: • Short range (1-10 m) • High data rate (100-1000 Gbps) • Indoor • Range/data rate trade-off • Low cost/high data rate communications • Types : • Impulse radio • Multi-carrier

  4. Impulse radio (IR) • Very short duration pulses • 100 pico-second • Wideband spectrum • Very low energy pulses • Combine many pulses to have reliable detection • Baseband transmission • No carrier • Simple • No continuous transmission • Spectrum lines violates power density mask • Use Time hopping-pulse position modulation (TH-PPM)

  5. TH-PPM • Time hopping spread spectrum • N mono-cycles for each data symbol ( = N chips) • Processing gain (PG1 = N) • Eb/N0 = PG1Ec/N0 • Remove line spectrums • Pulse selection (for each mono-cycle) • Should satisfy the PSD mask • Gaussian/Laplacian/Rayleigh/ Hermitian • Pulse does not occupy the while mono-cycle(chip) • More processing gain (PG2 = Tf/Tp ) for interference mitigation • PG = PG1 + PG2 • If delay between pulses > channel spread (TH) • No ISI between pulses  no ISI • Resistant to multipath propagation

  6. Pulses • Gaussian pulse • DC components • First derivative • Center freq : f0 = 1/Tp • 3dB BW = 1.16 f0 • Higher derivatives • Lower BW

  7. Modulation • PAM • BER = Q(2 SNR) • OOK • BER = Q( SNR) • Pulse positioning modulation(PPM) • p(t) = v(t – ddi) • is chosen based on pulse auto-correlation r(t) • Orthogonal case : r(t)= 0 • BER = Q((1-r)SNR) • Negative r improves BER • PSM • Different pulses for data • Orthogonal pulses • BER = Q(SNR)

  8. TX/RX architecture • TX : • A random offset is added (code) • Baseband pulse shaping • RX • Correlators • Data rate vs range • Variable SF

  9. Multiple access in TH-PPM • Time hopping codes • Tf = M Tc • Synchronous • # of orthogonal users = M • Latin square codes • Asynchronous • Pseudo-Random codes • Very low cross-correlation between codes

  10. DS-UWB • Direct sequence spread spectrum • N chips for each data symbol ( = N chips) • Processing gain (PG = N) • Eb/N0 = PG1Ec/N0 • Remove line spectrums • Pseudo-Random spreading • Chip pulse selection • Should satisfy the PSD mask • Gaussian/Raised cosine • We have ISI • Rake receiver is used in multipath propagation

  11. Modulation • BPAM • BER = Q(SNR) = Q(N SNRc) • OOK • BER = Q(SNR) • PPM • BER = Q((1-r)SNR) • Negative r improves BER • PSM • Different codes/pulses for data • BER = Q((1-r)SNR)

  12. Multi-carrier • MC-CDMA • Spread in frequency domain • MC-DS-CDMA • Spread in time domain • Multiband OFDM • BW : 500 MHz • Band hopping • MA: Frequency-time hopping pattern

  13. Reading • Opperman 1.1, 3.1, 3.2, and 3.3

More Related