Surfaces

1. Surfaces Lecture 17

2. Determining Diffusion Coefficients In practice, one would do experiments at a series of temperatures with a tracer, determine the profile, solve Fick’s second law at each T for D. Plotting ln D vs 1/T yields Do and EB. Diffusion coefficient is different for each species in each material. Larger, more highly charged ions diffuse more slowly.

3. Diffusion in Liquids Diffusion in liquids is much faster than in solids. So much so that in mixed media (e.g., sediment + pore water, partially molten rock), essentially all diffusive transport takes place through the liquid phase. Diffusion in liquids can be related to viscosity: For ionic species in aqueous electrolyte, diffusion coefficient depends on charge: Where l˚ is limiting ionic conductance

4. Reactions at Surfaces Homogeneousreactions are those occurring within a single phase (e.g., an aqueous solution). Heterogeneous reactions are those occurring between phases, e.g., two solids or a solid and a liquid. Heterogeneous reactions, whether between a magma and a mineral, water and the atmosphere, or between two minerals necessarily occur across an interface. Hence the importance of “interfaces” and “surfaces” in geochemistry.

5. Interfaces, Surfaces, and Partial Molar Area • By definition, an interface is boundary between two condensed phases (solids and liquids). • A surface is the boundary between a condensed phase and a gas (or vacuum). • In practice, surface is often used in place of interface. • We previously defined partial molar parameters as the change in the parameter for an infinitesimal addition of a component, e.g., vi = (∂V/∂n)T,P,nj. We define the partial molar area of component i in phase f as: • wherenis moles of substance. This, this is the increase in surface area of f for an infinitesimal addition of i. • Unlike other quantities, surface area is not an intrinsic property of the phase, but depends on shape, size, roughness, etc.For a perfect sphere: • Partial molar areas similarly depend on such factors.

6. Surface Free Energy • We now define the Surface Free Energy as: • The surface free energy represents those energetic effects that arise because of the difference in atomic environment on the surface of a phase. • Surface free energy is closely related to surface tension. • The total surface free energy of a phase is minimized by minimizing the phase’s surface area. • Thus a water-drop in the absence of other forces will tend to form a sphere, the shape that minimizes surface area.

7. Incorporating Surface Free Energy • When surface effects must be considered,we can revise equation 3.14 to read: • where the second sum is taken over all interfaces and surfaces of the phase. • In general, the surface free energy depends on the nature of the two phases in contact. It will be different for water in contact with a mineral than for water in contact with air. • For an isotropic phase immersed in a homogeneous medium, we need concern ourselves with only one interface free energy. • For crystals, different faces can have different interfacial free energies, even if in contact with the same phase (but we won’t concern ourselves with this complexity). • In a rock, for example, a given crystal might be in contact with several different minerals - each would have a different interfacial free energy. • Differences in surface free energy are a key factor in the development of banding in gneisses.

8. The Acasta Gneiss Smithsonian geology gallery: geogallery.si.edu • Minerals nucleate and grow on surfaces with the lowest surface free energy. • Typically, these are the same or similar minerals • (e.g., quartz on quartz or feldspar, producing the light-colored bands).

9. The Kelvin Effect • When the size of phases involved is sufficiently small, surface free energy can have the effect of displacing equilibrium. For an equilibrium system at constant temperature and pressure, eqn. 5.109 becomes: • The first term on the right is∆G˚, which is equal to –RTln K. This is the “normal” equilibrium constant, so we’ll call it K˚. We’ll call the summation in the second term Ks, the equilibrium influenced by surface free energy. Making these substitutions and rearranging, we have: • Thus we predict that equilibrium can be shifted due to surface free energy, and the shift will depend on the surface or interfacial area. This is known as the Kelvin effect. • There are a number of examples of this effect. For example, fine, and therefore high surface area, particles are more soluble than coarser particles of the same composition. • Water has a surface free energy of about 70 mJ/m2. So, for example, humidity in clouds and fogs can reach 110% when droplet size is small.

10. Surface Free Energy & Metamorphism Another usual effect of metamorphism is an increase in grain size. This occurs even in monomineralic rocks like limestone and sandstone. The free energy of the system is reduced by reducing grain-to-grain interfaces, which is lower in coarser grained rocks. Thus marble and quartzite are typically coarser grained than limestone and sandstone.

11. Nucleation • Liquids can become significantly supersaturated but crystallization will often begin as soon as seed crystals are added. • This suggests that nucleation is an important barrier to crystallization. • This barrier arises because the formation of a crystal requires a local increase in free energy due to the surface free energy at the solid–liquid interface. • True of liquids and solids condensing from gas as well. • Let’s explore this a bit further. For a crystal growing in a liquid, the complete free energy change is: dG = dσ+dGxtl • For a spherical crystal of phase f growing from a liquid solution of component f. The free energy change over some finite growth interval is: • r is radius. We divide by the molar volume to convert J/mol to J/m3. (In fact, per volume units, rather than per mass or per mole, turn out to generally be more convenient in kinetics). • The first term on the right is always positive, so exactly at saturation (∆Gxt=0), ∆Gtot is positive and there will be no crystallization.

12. Nucleation & Growth • Rate of change with r is: • For small r, first term increases more rapidly. • ‘Turnaround’ occurs at ∂∆G/∂r = 0 • Setting ∂∆G/∂r = 0, we can solve for the critical radius: Total free energy as a function of r for various amounts of undercooling. We approximate the ∆G term as∆G≈ -∆T∆Sxtl, where ∆T is the difference between actual temperature and the saturation temperature.

13. Surface Free Energy & Viscosity • The surface free energy term correlates with viscosity. Thus nucleation should require less supersaturation for aqueous solutions than silicate melts. • Among silicate melts, nucleation should occur more readily in basaltic ones, which have low viscosities, than in rhyolitic ones, which have high viscosities. This is what one observes: natural glasses are silicate melts that failed to crystallize. obsidians (formed from SiO2-rich rhyolitic melts) are more common than basaltic glasses. • Also, we might expect rapid cooling to lead to greater supersaturation than slow cooling. This is because there is an element of chance involved in formation of a crystal nucleus (the chance of bringing enough of the necessary components together in the liquid so that r exceeds rcrit).

14. Nucleation The first step is the formation of small clusters of atoms of the right composition. These so-called heterophase fluctuations arise because of statistical fluctuations in the distribution of atoms in the liquid (or gas).

15. Heterophase Fluctuations in Silicate Magmas Recall that basic structural unit in both liquid and solid silicates is the silica tetrahedron We can imagine one of these heterophase fluctuations to, by chance, result in a local distribution of Mg, Fe, and SiO4 ions in the liquid that is very similar to that in an olivine crystal.

16. Nucleation Rate These fluctuations cause local variations in free energy, and their distribution can be described by the Boltzmann distribution law. The number of clusters of critical size is: where Ncritis the number of clusters of critical size per unit volume, Nv is the number of atoms per unit volume of the cluster, and ∆Gcritis the total free energy (∆Gtot) of clusters with critical radius (i.e., previous equation with r = rcrit. For a spherical cluster, this is:

17. Nucleation Rate If EA is the energy necessary to attach an additional atom to the cluster, then the probability of this is: According to transition state theory, the frequency of attempts, n, to overcome this energy is simply the fundamental frequency, ν= kT/h. The attachment frequency is then the number of atoms adjacent to the cluster, N*, times the number of attempts, times the probability of success: Nucleation rate should be this times number of clusters of critical radius:

18. Diopside Nucleation The nucleation rate passes through a maximum. This reflects the 1/T dependence of both exponential terms; the formation and growth of heterophase fluctuations falls with temperature. Combining pre-exponential terms into a frequency factor, A, and using ∆G ≈ ∆S∆T where ∆T is the offset from the crystallization T (the temperature overstep), for a spherical nucleus the nucleation rate, I is: Bottom line:

19. Heterogeneous Nucleation • Heterogeneous nucleation refers to the nucleation of a phase on a pre-existing one. This occurs when the surface free energy between the nucleating phase and the pre-existing surface is lower than between the nucleating phase and the phase from which it is growing. • Examples: dew, pyx-plag intergrowths, gneiss.

20. Heterogeneous Nucleation Consider, for example, a dew drop on a leaf. The balance of surface forces at the three-phase (air-water-leaf) contact is: and If the interfacial energy between the nucleating phase, β, (the dew) and the surface (σβs) (the leaf) is smaller than that between phase α (air) and the surface (σαs), then the angle of intersection, θ, will be small so as to maximize the interfacial surface area between the dew (β) and the leaf (s)for a given volume of β. In the limit where σβs≪ σαsthen θwill approach 0 and βwill form a film coating the surface. As σβsapproaches σαsthe nucleating phase will form more spherical droplets. If σβs≥ σαsthen θwill be 90° or greater, and heterogeneous nucleation will not occur.

21. Heterogeneous Nucleation In metamorphic reactions, nucleation will necessarily always be heterogeneous. Provided the necessary components of the nucleating phase are available and delivered rapidly enough by fluid transport and diffusion, interfacial energy will dictate where new phases will nucleate, nucleation being favored on phases where the interfacial energy is lowest. (Where transport of components limit growth, however, this may not be the case, as phases will nucleate where the components necessary for growth are available.)

22. Diffusion and heat-flow limited growth Sr D Plag. Crystals can grow only as rapidly as the necessary chemical components are delivered to their surfaces and heat removed (or added). Where diffusion is not rapid enough to supply these components, diffusion will limit growth. Slow diffusion can change the apparent distribution coefficient, because the crystal “sees” the concentrations in the adjacent boundary layer rather than the average concentrations in the liquid. Thus the crystal may become less depleted in elements excluded from the crystal, and less enriched in elements preferentially incorporated in it, than equilibrium thermodynamics would predict. When crystals grow from a liquid there will be a local increase in temperature due to release of latent heat of fusion, ∆Hm, which will retard crystal growth. In most cases, this is at best a minor effect. The effect is probably more important in prograde metamorphic reactions (e.g., dehydration reactions), which are usually endothermic and hence require a continuous supply of energy to maintain crystal growth.

23. Zoning Diffusion limits the ability of the interior of a crystal to maintain equilibrium with the magma from which it is precipitating. This leads to zoning in crystals, apparent under the microscope. Zoning can record magma history. Zoned pyx and plag in lava.