200 likes | 532 Views
EU LIMAS Liquefaction around marine structures. Workpackage 7, NTNU Trondheim Development of soil sampler for measurement of gas content in soils Methods for gas measurements By associate professors Rolf Sandven (NTNU) and Mike Long (UCD). EU LIMAS Liquefaction around marine structures.
E N D
EU LIMASLiquefaction around marine structures Workpackage 7, NTNU Trondheim Development of soil sampler for measurement of gas content in soils Methods for gas measurements By associate professors Rolf Sandven (NTNU) and Mike Long (UCD)
EU LIMASLiquefaction around marine structures Soil - water gas systems (Hrydech et al (1987)) Sr = 5-9 % Sr = 9 - 70 % Sr > 70 %
Effect of gas on soil characteristics Sample disturbance due to gas exsolution and expansion Influence on soil parameters shear modulus bulk modulus strength and pore pressure parameters consolidation parameters Influence on geophysical properties wave velocity magnetism EU LIMASLiquefaction around marine structures
Detection of gas in soil samples Computer tomography (CT) scan imaging Scanning Electron Microscope (SEM) techniques Uni- or multisensor scanning devices sonic wave velocity gamma-ray magnetism Volumetric measurement during water absorption EU LIMASLiquefaction around marine structures
EU LIMASLiquefaction around marine structures X-ray computed tomography set-up(Desrues et al) sample
EU LIMASLiquefaction around marine structures CT scan results Wong et al Sand sample with variable air saturation Abegg et al Volume of gas bubbles
EU LIMASLiquefaction around marine structures Examples of CT soil research data
EU LIMASLiquefaction around marine structures • Scanning electron microscope (SEM) • Impregnation of specimen sections using special resin • Imaging of thin sections using SEM techniques • Computerised image analysis is used to measure void sizes and distributions • Obtainable resolution in the mm - scale Soil containing gas bubbles (Sills et al)
EU LIMASLiquefaction around marine structures • Multisensor core logger • Combines a number of parameters to derive a picture of the core • gamma ray • shear wave and/or compression wave velocities • Software processing of image Geoscan II image
EU LIMASLiquefaction around marine structures Multi-sensor core logger with output results r V M sample
EU LIMASLiquefaction around marine structures • Use of backpressure techniques • Core sample is pressurised in pressure cell before backpressure is applied • Sample can absorb de-aired water • Precision measurement of water absorption for increasing pressures indicates gas volume
EU LIMASLiquefaction around marine structures • In situ gas detection • BAT probe for sampling of water and gas • CPTU based modules • seismic CPTU • resistivity CPTU • Spectral analysis of surface waves (SASW)
Gas detection Preliminary conclusions Transportable and flexible pressure systems emphasised for common use measurement of water volume change during application of back-pressure Selected samples or projects use of X-ray, CT or MRI imaging methods indirect methods based on influence on soil parameters shear wave or compression wave velocity needs soil specific calibrations EU LIMASLiquefaction around marine structures
EU LIMASLiquefaction around marine structures • Use of backpressure saturation technique • Core sample is pressurised in pressure cell before back-pressure and a flow gradient is applied • Sample can absorb de-aired water • Precision measurement of water absorption for increasing pressures indicates gas volume