1 / 82

FLO FAB

Discover the Flo Fab story since 1981, offering a wide range of pumps, tanks, and heat exchangers. Explore their new 27,000 sq ft factory with advanced fabrication lines and a web-based selection system.

astarks
Download Presentation

FLO FAB

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FLO FAB

  2. The Flo Fab Story: • Established in 1981. • Acquired Menard Leonard Electric & PMA. • Acquired Aqua Profab in 1999. • Acquired Idealco in 2000, including patents, S & T heat exchanger patterns. • 2001- New online product selection & quoting software – www.flofab.com/partners.asp • 2002 – Moved to new manufacturing facility.

  3. New Factory: • Opened December 2002 • 27 000 square feet • 3 separate pump fabrication lines • 7 manual welding lines • 1 robotic welding line • 1 heat exchanger line • New C&C machine • Overhead crane • Kaizen method of plant layout • 24 000 gallon tank with test bench • Close to major highway interchange • 3 truck bays situated within reach of overhead crane

  4. Web-based product selection & quoting system: • Online catalog • Online pump selections • Online shop drawings • Online tank selections • Online pricing • Projects saved as a quote • Online accessory selection • Online photo gallery Click here to go to Flo Fab’s web site

  5. The Flo Fab Family: • Pumps • VIL, Base-mounted, Submersible, Systems & other • Tanks • Expansion/pressure, Flash, Condensate / Boiler Feed, Storage, Custom systems • Heat exchangers • Shell & Tube, Shell & Coil, Brazed Plate, Plate & Frame • Accessories • Valves, Gauges, Thermometers, Flexibles, Suction Diffusers, Multi-Function Valves, etc..

  6. Flo Fab Pumps: • Vertical Inline • Circulators, closed-coupled, spacer-coupled • Base-mounted • End suction, closed-coupled, spacer-coupled, split case, double-suction, unique configurations • Submersible • Sewage, effluent, column, stainless steel, duplex, panels, accessories • Systems & Other • Multi-stage, gear, glycol, custom systems, VFD

  7. Flo Fab Pumps: • All Flo Fab pump products are made with a resin pattern which results in an improved exterior finish, smooth interior passage, and higher efficiency pumps • Quiet operation, especially at 1750 rpm • Quick delivery on series 600, 880, 880RI, 1000, and 2000 pumps • Interchangeable parts impeller, bracket, mechanical seal and coupling on series 880, 880RI, 1000 and 2000. • Standard available parts from any service centers, (Woods couplings, standard motors, standard mechanical seal, standard bearings)   • Impellers are hydraulically trimmed and balanced to every selected condition • 1150, 1750, 3500 rpm for any series

  8. Flo Fab Pumps: • All pumps are factory tested and certified performance test is available when requested by the consultant, at NO extra cost. • Test facilities up to 400 HP with 24,000 gallon test bench with calibrated instruments • Engineers on staff, quality controls, CAD drawings and a modern factory back-up warranty • Competitively priced products • Full line of complementary accessory products • Full product catalogues (2) are available

  9. Flo Fab Vertical Inline Pumps: • Series 600 • Closed-coupled circulators 1 x 1-2 to 3 x 3-4 • Series 880 • Closed-coupled VIL 2 x 2-8 to 6 x 6-12 • Series 880RI • Spacer-coupled VIL 2 x 2-8 to 6 x 6-12 • Series 840SC • Spacer-coupled VIL 2 x 2-8 to 16 x 16-19

  10. Flo Fab Vertical Inline PumpsSeries 600: • Closed-coupled circulators 1 x 1-2 to 3 x 3-4 • Stainless steel shaft • Cast iron bracket vs. aluminium • Vertical or horizontal position • Flanges are supplied with each pump • No bearing assembly (no maintenance) • Impeller is hydraulically trimmed and balanced to every condition (not plastic non ferrous type moulded non-stamped metals)

  11. Flo Fab Vertical Inline PumpsSeries 600: • No coupling • Standard motor replacement • Back pullout design allows maintenance without disturbing the pipe • Suction and discharge gauge tappings are standard • All iron ,bronze fitted or all bronze construction material • Standard 250 °Fmechanical seal (carbon 15 ceramic, elastomer is Viton with stainless steel spring) standard in the industry.

  12. Flo Fab Vertical Inline PumpsSeries 880: • Closed-coupled 2 x 2-8 to 6 x 6-12 • JM frame motor & pump shaft - bronze sleeve (stainless steel sleeve is optional) motors are available but with limited suppliers • Cast iron bracket interchangeable with series880RI,1000, 2000 • Vertical or horizontal position (up to 5 hp) • Some brackets have additional motor mountings for different size motor frames and different HP • Impellers are available in all iron, all bronze, or all stainless steel • Self-aligned • Standard JM motor replacement

  13. Flo Fab Vertical Inline PumpsSeries 880: • Back pullout design allows maintenance without disturbing the pipe • Suction and discharge gauge tappings are standard • Bronze replaceable wear ring for casing • All iron, bronze fitted or all bronze construction material • Standard 250 °F mechanical seal (carbon vs. ceramic, elastomer is Viton with stainless steel spring) standard in the industry. (other materials for high temperature are available) • Drain plug at the bottom of the casing • Thermometer socket connection at the suction casing

  14. Flo Fab Vertical Inline PumpsSeries 880: • 250 psi flange casing standard (drilled to 150 # or 250 # ) no extra cost • 3 and 4 inch pumps have pre-drilled bolt tappings and sized for either line sizes • Flanges are tapped for NC bolts • 4 extra tappings on the suction pump flange suction are standard • 5 extra tappings on the pump discharge flange are standard (for gauges, temp relief valve, cyclone separator, flush line) • Special tappings on discharge flange for pitot tube. • Floor mounting square pedestal with 4 bolts holes is standard • Stainless steel suction diffuser on the pump inlet (optional) with holding set screw already pre-drilled

  15. Flo Fab Vertical Inline PumpsSeries 880RI: • Spacer-coupled 2 x 2-8 to 6 x 6-12 • TC frame motors have steel or stainless steel shaft • Motors are available with unlimited suppliers (easy to source) • Stainless steel pump shaft on the power frame are with bronze sleeve or (stainless steel sleeve is optional). • Two power frames available LF1 and LF2 for different HP • Same power frames are used for horizontal series 2000 pumps • Cast iron bracket interchangeable with series 880, 1000 and 2000 series • Vertical or horizontal position (up to 5 hp)

  16. Flo Fab Vertical Inline PumpsSeries 880RI: • Some brackets have additional motor mountings holes for different size motor frames and different HP • Impeller is hydraulically trimmed and balanced to every condition • Impellers are available in iron, all bronze, or all stainless steel • Standard Woods spacer coupling self aligned because of the motor bracket placement • Power frame pull-out design allows: • Easy maintenance • Replacement of impeller without removing the motor • Trimming of the impeller • Changing the mechanical seal • Changing power frame bearings • Changing the pump shaft • Changing wear ring While not removing the motor and without disturbing the pipe

  17. Flo Fab Vertical Inline PumpsSeries 880RI: • Suction and discharge gauge tappings are standard • Bronze replaceable wear ring for casing • All iron, bronze fitted or all bronze construction material • Standard 250 °Fmechanical seal (carbon vs. ceramic, elastomer is Viton with stainless steel spring) standard in the industry. (other materials for high temperature are available) • Drain plug at the bottom of the casing • Thermometer socket connection at the suction casing

  18. Flo Fab Vertical Inline PumpsSeries 880RI: • 3 and 4 inch pumps are pre-drilled and suited for either sizes • Flanges are tapped for NC bolt thread • 4 extra tappings on the suction pump flange suction are standard • 5 extra tappings on the pump discharge flange are standard (tappings can be used for gauges, temp relief valve, cyclone separator, flush line) • Special tappings on discharge side of the pump flange for a pitot tube insertion (which will allow you to read differential pressure and go to a GPM flow chart) standard (however pitot tube is an option and must be specified by the consultant. • Standard floor mounting square pedestal with 4 bolt holes • Stainless steel suction diffuser on the pump inlet (optional) with holding set screw already pre-drilled

  19. Flo Fab Vertical Inline PumpsSeries 880RI: Parts that can be removed while pump & motor stay online: • Coupling • Shaft • Bearing assembly • Bracket • Pump seal • Impeller • Wear ring

  20. Flo Fab Vertical Inline PumpsSeries 880RI:

  21. Flo Fab Vertical Inline PumpsSeries 880RI:

  22. Flo Fab Vertical Inline PumpsSeries 880RI:

  23. Flo Fab Vertical Inline PumpsSeries 840SC: • Spacer-coupled VIL 2 x 2-8 to 16 x 16-19 • P base motors with steel or stainless steel shafts • Motors are available but with limited number of suppliers (difficult to source); only 4 motor manufacturers • Stainless steel short pump shaft with bronze sleeve or stainless steel sleeve (optional). • Cast iron bracket (not interchangeable with other series) • Vertical installation only • Impellers are available in iron, or all bronze • Special ductile iron spacer coupling to align the pump and motor shafts • Special floating bellows mechanical seal, which can be replaced without removal of the motor (outside seal arrangement)

  24. Flo Fab Vertical Inline PumpsSeries 840SC: • Suction and discharge gauge tappings are standard (1 tapping on the suction flange, 1 tapping on the discharge flange) • Bronze replaceable wear ring for casing standard • All iron, bronze fitted or all bronze construction material • Standard 250 °F mechanical seal (carbon vs. Ceramic, elastomer is Viton with stainless steel spring) standard in the industry. (other materials for high temperature are available) • Drain plug at the bottom of the casing • 150 psi flange casing standard • Floor mounting square pedestal with 4 bolts holes • Only advantage is really replacement of an expensive outside seal

  25. Flo Fab Vertical Inline PumpsSeries 840SC: Disadvantages of the series 840SC pump: • No flanges are tapped with NC bolts threads: longer bolts and nuts are required. • Special maintenance • Cannot replace the impeller unless the motor is removed • Cannot trim the impeller unless the motor is removed • No bearings to support the pump shaft • Cannot change the pump shaft or wear rings without removing the motor • Special ductile iron spacer coupling • Special seal • Special motor

  26. Flo Fab Vertical Inline PumpsSeries 840SC:

  27. Flo Fab Vertical Inline PumpsSeries 840SC: • Motor • Motor bracket • Coupling • Shaft • Pump seal • Impeller • Wear ring

  28. Flo Fab Base-mounted Pumps: • Series 1000 • End suction, closed-coupled less base 2 x 1-6 to 6 x 5-12 • Series 2000 • End suction, base-mounted 2 x 1-6 to 6 x 5-12 • Series 2300 • End suction, base-mounted 2.5 x 2-5 to 12 x 10-18 • Series 6000 • Single suction, base-mounted 1.5 x 1.5-8 to 12 x 10-17 • Series 4700 & 4800 – Split Case • Double suction, base-mounted 8 x 6-14 to 16 x 42-27.8

  29. Flo Fab Base-mounted Pumps Series 1000 : • Closed-coupled, end-suction less base 2 x 1-6 to 6 x 5-12 • JM frame motor as pump shaft and bronze sleeve (stainless steel sleeve is optional) motors are available but with limited suppliers • Cast iron bracket interchangeable with series 880,880RI and 2000 • Horizontal position without a baseplate • Casing rotation to eight possible positions • Some brackets have additional motor mountings holes for different size motor frames and different HP motors • Impellers are available all iron, all bronze, or all stainless steel • No spacer coupling is required: self-aligned because of the motor bracket placement • Standard JM frame motor replacement

  30. Flo Fab Base-mounted Pumps Series 1000 : • Back pull-out design allows • Easy maintenance • Replacement of impeller, • Trimming of the impeller • Changing the mechanical seal, • Changing power frame bearings • Not having to remove the pump casing to service the pump parts and without disturbing the pipe • Suction and discharge gauge tappings are standard • Bronze replaceable wear ring for casing • All iron ,bronze fitted or all bronze construction material

  31. Flo Fab Base-mounted Pumps Series 1000 : • Standard 250 °F mechanical seal (carbon vs. Ceramic, elastomer is Viton with stainless steel spring) standard in the industry. (other materials for high temperature are available) • Drain plug at the bottom of the casing • 250 lbs casing is standard with flange or NPT connections • Flanges are pre-drilled to 150 lbs (250 lbs is optional) • 1 tapping on the pump discharge flange is standard • Steel baseplate on closed coupled pumps is an extra cost but available

  32. Flo Fab Base-mounted Pumps Series 1000 : Motor, Shaft, Bracket, Seal, Impeller, Wear ring

  33. Flo Fab Base-mounted Pumps Series 2000: • Spacer-coupled, base-mounted, end-suction 2 x 1-6 to 6 x 5-12 • T frame motors have steel or stainless steel shafts • Motors are available with unlimited suppliers (easy to source) • Stainless steel pump shaft on the power frame are with bronze sleeve or (stainless steel sleeve is optional). • 2 power frame LF1 and LF2 for different HP size motors • Cast iron bracket interchangeable with series 880,880RI and 1000 • Horizontal position with a steel baseplate

  34. Flo Fab Base-mounted Pumps Series 2000: • Casing rotation to eight possible positions • Some brackets have additional motor mountings holes for different size motor frames and different HP motors • Impellers are available in iron, all bronze, or all stainless steel • Standard T frame motor replacement • Steel coupling guard and soon OSHA (Occupational Safety and Health Administration) guard will be standard

  35. Flo Fab Base-mounted Pumps Series 2000: • Back pull-out design allows • Easy maintenance • Replacement of impeller, without removing the motor • Trimming of the impeller • Changing the mechanical seal, • Changing motor bearings • Not having to remove the pump casing to service the pump parts without disturbing the pipe

  36. Flo Fab Base-mounted Pumps Series 2000: • Discharge& suction gauge tappings are standard • Bronze replaceable wear ring for casing • All iron ,bronze fitted or all bronze construction material • Standard 250 °F mechanical seal (carbon vs ceramic, elastomer is Viton with stainless steel spring) standard in the industry. (other materials for high temperature are available) • Drain plug at the bottom of the casing • 250 lbs casing is standard • Flanges are pre-drilled to 150 lbs (250 lbs is optional) • Pre-drilled anchor holes with grout hole is standard with all steel baseplate at no extra cost

  37. Flo Fab Base-mounted Pumps Series 2000 : Motor; Coupling; Shaft; Bearing assembly; Pump seal; Bracket; Impeller; Wear ring

  38. Flo Fab Base-mounted Pumps Series 2300 : • Spacer-coupled, end-suction, base-mounted up to 14” suction • Steel coupling guard and soon OSHA (Occupational Safety and Health Administration) guard will be standard • Stainless steel pump shaft on the power frame are with bronze sleeve or (stainless steel sleeve is optional). • T frame motors have steel or stainless steel shaft • Motors are available from large number of suppliers • Horizontal position with a cast-iron baseplate • Industrial quality oil sump for bearing assembly • Oil level sight glass

  39. Flo Fab Base-mounted Pumps Series 2300 : Back pull-out design allows: • Not having to remove the pump casing to service the pump parts without disturbing the pipe • Easy maintenance • Replacement of impeller, without removing the motor • Trimming of the impeller • Changing the mechanical seal • Changing motor bearings

  40. Flo Fab Base-mounted Pumps Series 2300 : • Discharge& suction gauge tappings are standard • Bronze replaceable wear ring for casing • All iron, bronze fitted or all bronze construction material • Standard 250 °F mechanical seal (carbon vs. ceramic, elastomer is Viton with stainless steel spring) standard in the industry. (other materials for high temperature are available) • Drain plug at the bottom of the casing • 250 lbs casing is standard • Flanges are pre-drilled to 150 lbs (250 lbs is optional) • Cast-iron base doesn’t require grouting

  41. Flo Fab Base-mounted Pumps Series 6000 : • Spacer-coupled, single-suction, base-mounted 1.5 x 1.5-8 to 12 x 10-17 • 16 different configurations • Suction • Discharge • Motor • Coupling • Shaft • Bearing assembly • Bracket

  42. Flo Fab Base-mounted Pumps Series 6000 : • 16 different configurations:

  43. Flo Fab Base-mounted Pumps Series 4700: • Spacer-coupled double-suction split case base-mounted 6 x 6-7.8 to 14 x 12-16.4 • Parts that can be removed while pump & motor stay online: • Coupling • Shaft • Top cover • Pump seal • Bearing assembly • Impeller (hidden) (hidden) (hidden) (hidden)

  44. Flo Fab Base-mounted Pumps:Series 4800: • Spacer-coupled, double configuration, double-suction, base-mounted 6 x 6-7.8 to 14 x 12-16.4 • Parts that can be removed while pump & motor stay online: • Coupling • Shaft • Bracket • Pump seal • Bearing assembly • Impeller

  45. Flo Fab Submersible Pumps: • Sewage • Effluent • Grinder • Column

  46. Flo Fab Submersible Pumps: Sewage FBV, FBK • Up to 3” solids • Up to 3HP • Over 70’ lift • Up to 317 usgpm

  47. Flo Fab Submersible Pumps: Effluent LB, LBV, LBK • Up to 2” solids • Up to 1HP • Over 50’ lift • Up to 185 usgpm

  48. Flo Fab Submersible Pumps: Effluent elevator PD & PDZ • Up to 3/8” solids • Up to 1.5 HP • Over 60’ lift • Up to 87 usgpm • Stainless steel construction • Commercial/residential use

  49. Flo Fab Submersible Pumps: Grinder FGC • Up to 3” solids • Up to 3HP • Over 80’ lift • Up to 61 usgpm

  50. Flo Fab Submersible Pumps: Column SEP, SUP • Up to 20HP • Over 90’ lift • Up to 1,000 usgpm

More Related