1 / 16

PS2 Injection/Extraction Layout

PS2 Injection/Extraction Layout. Wolfgang Bartmann PS2 Meeting, 23-May 07. Outline. Aims Optics in LSS Space Requirements – Injection H - -Injection – Lorentz stripping and Septum geometry Space Requirements – Extraction/Beam dump Conclusion of space requirements

astra
Download Presentation

PS2 Injection/Extraction Layout

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PS2 Injection/Extraction Layout Wolfgang Bartmann PS2 Meeting, 23-May 07

  2. Outline • Aims • Optics in LSS • Space Requirements – Injection • H--Injection – Lorentz stripping and Septum geometry • Space Requirements – Extraction/Beam dump • Conclusion of space requirements • Fitting Injection/Extraction together • Next steps PS2 Meeting: Inj/Extr Layout

  3. Aims • Injection: • Fast Injection • H--Injection • Extraction: • Fast Extraction • Resonant Extraction • Low-loss 5 turn continuous transfer • Beam dump (assumed internal) PS2 Meeting: Inj/Extr Layout

  4. FODO Lattice - LSS Betafunctions and Dispersion in the LSS: • betx, bety < 42 m • Dx < 10 cm PS2 Meeting: Inj/Extr Layout

  5. Space Requirements: Injection (1) • Fast Inj. needs one cell. We see no special issues with this system. • H--Inj. is limited due to Lorentz Stripping: For energies up to 3.5 GeV, the field strength in dipoles must not exceed 0.14 T (2.4 · 10-5 loss/m) which corresponds to a maximum deflection of ~ 9 mrad/m; Field at 75 mm offset in quadrupoles does not exceed these limits (at injection energies!). PS2 Meeting: Inj/Extr Layout

  6. H- -Inj: Lorentz stripping… • Can parameterize formula for lifetime in magnetic field • t = a/E x exp(b/E) Where t = lifetime, a~4x10−14 s-MV/cm, b~44 MV/cm and E is Lorentz-transform of the magnetic field B (E [MV/cm] = 3.20 p [GeV/c] x B [T]). • Rule of thumb : p x B ≤ 0.6 - 0.7 GeV/c x T • More exactly: for PS2 injection at 4.8 GeV/c (4 GeV kinetic) should keep fields below 0.13 - 0.15 T (corresponds to about 10-3 loss per m of field)…gain x10 in loss at fixed B at 3.5 GeV! PS2 Meeting: Inj/Extr Layout

  7. H--Inj: Lorentz Stripping –total losses • Need to aim for 10-3 total loss • Few 10-4 per element/system • Bend angles were assumed at 200 mrad… • Maximum bend about 9 mrad/m (3.5 GeV) • Would need ~20 m of injection septum!!!! • In one FODO ½ cell have ~ 10 m free drift • Assume 8 m magnetic length for septum • Maximum deflection is then ~ 70 mrad. PS2 Meeting: Inj/Extr Layout

  8. Space Requirements: Injection (2) H--Inj. in FODO structure: • Injecting in one halfcell (~11.3 m free drift) with several septa reaches a displacement of about 0.57 m at the quadrupole. • Going through the coil window of the enlarged quadrupole avoids large septum kicks but needs one halfcell more. • H--Inj. occupies 1.5 to 2 cells • Space requirement for injection: 2.5 to 3 cells PS2 Meeting: Inj/Extr Layout

  9. H--Inj: Injection septum geometry 570 mm 60 mm 2.0 m, 18.0 mrad Difficult (but maybe not impossible!) to get past upstream quad yoke and into the downstream quad aperture. PS2 Meeting: Inj/Extr Layout

  10. H--Inj: Injection septum geometry‘coil window’ alternative 300 mm 60 mm 2.0 m, 7.5 mrad Less bending angle, but the first meters of the halfcell before are needed, too. PS2 Meeting: Inj/Extr Layout

  11. Space Requirements: Extraction • the three extraction systems need 4.5 cells according to the conceptual design (Jan 07) • rearrangement of the elements in the extraction and placing the extraction kicker in the dispersion suppressor gives a requirement of three cells in the LSS Problems: • larger apertures in the dipoles • less flexibility in the design of the dispersion suppressor S S PS2 Meeting: Inj/Extr Layout

  12. Space requirements: Beam dump ~2 m Vertical plane… Internal dump block at about 40 mm aperture Dump kickers filling one half-cell (~ 2.5 mrad needed at 50 GeV) Vertical has some advantages: - smaller beam size at injection means block closer to orbit  lower kick Needs to fit into long injection/extraction straight section…. - infrastructure, radiation PS2 Meeting: Inj/Extr Layout

  13. Conclusion of space requirements • Injection: 2.5 to 3.0 cells • Extraction: 3.0 cells (4.0 total) • Dump: 1.0 cell • Total: 6.5 to 7.0 cells PS2 Meeting: Inj/Extr Layout

  14. Optimum (?) fitting togetherwith present lattice Fast Injection H--Injection Extraction DS InjK InjS H0S H-InjS MTEBK MS2 MS1 ES MTEBK ExtK 6 cells • No room for beam dump • Kicker in Dispersion Suppressor PS2 Meeting: Inj/Extr Layout

  15. Options for inj/extr straightwithout using the DS Fast Injection H--Injection Extraction Beam Dump InjK InjS H0S H-InjS MTEBK MS2 MS1 ES MTEBK BD DuK ExtK InjK InjS H0S H-InjS MTEBK MS2 MS1 ExtK MTEBK BD DuK ES 7 cells PS2 Meeting: Inj/Extr Layout

  16. Next steps: Iterate Inj/Extr Layout Versions • Designing the arc as an achromat saves one cell per arc (cell length is shorter)  7 LSS cells • Use different cell structure in the LSS, e.g. Doublet • Increase dipole strength in the arc in order to gain one cell more for the LSS (7 cells) for same circumference • More detailed H- -injection design! PS2 Meeting: Inj/Extr Layout

More Related