1 / 27

Note

Note. Questa unità didattica è stata realizzata su lavagna LIM Hitachi per cui il formato originale era quello proprietario .yar.

ata
Download Presentation

Note

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Note • Questa unità didattica è stata realizzata su lavagna LIM Hitachi per cui il formato originale era quello proprietario .yar. • La poca trasferibilità di tale tipo di file ci ha costretto a fornire una versione power point. E’ ovvio che alcuni espedienti didattici (utilizzo di giochi, soluzioni nascoste da box, o rese invisibili) non possono essere riportati in ppt. • Le note aiutano a seguire lo svolgimento della lezione. • Il file qui presentato si completa con altri file di tipo .doc contenenti esercizi, scheda di laboratorio etc.

  2. Resistance Potential difference or voltage Current OHM’s LAW

  3. click here click click click

  4. click over this black box to check your equation

  5. Click over this black box to check your equation

  6. From Kirchhoff’s laws to equivalent resistor Calculate the current I1 in the following circuit: Using Ohm’s law we find: And then for the first Kirchhoff’s law

  7. It’s very easy. Now, using the symbol notation find the potential difference between the two point A and B (VAB) If we suppose to have a resistor We can write: but this is Ohm’s law! What can we elicit from this?

  8. “ Two resistor R1, R2 between the same two points are equivalent to a single resistor RP which value is: R1, R2 are named parallel resistors and RP is called equivalent resistor of R1 and R2. “two or more resistors are in parallel configuration if they are connected between the same two points, as a consequence they have the same potential difference at the extremities” If the parallel resistors are more than two (R1, R2, R3, ….) the equivalent resistor RP can be found as:

  9. This means that in a circuit we can substitute 2 parallel resistors with the equivalent resistor simplifying the net. The potential difference at the extremities doesn’t change but in the new circuit the currents through the two resistors disappear Where:

  10. Calculate VAB, VBC and VAC in the following circuit if the current I is equal to 2A (amps) The current over R1 from A to B (IA->B) is equal to the current over R2 from B to C (IB->C) and is equal to I Solution: With the Ohm’s law we can find and for the second Kirchhoff’s law If we suppose to have a resistor we can write And this is the Ohm’s law!

  11. We can say that R1 and R2 are in series configuration and that Rs=R1+R2 is the equivalent resistor of the series configuration. “two ore more resistors R1, R2, R3, … are in series configuration if the current through all of the resistors is the same. In this case the resistors can be substitute with a single resistor which value is: “ When we use the equivalent series resistor the points between the resistors disappear but the current through the resistor doesn’t change.

  12. Exercise Calculate the currents I1, I2, I3 and the potential difference VAB and VBC in the following circuit Solution

  13. In the previous lesson we proposed an exercise (misto.doc). • EXERCISE • IN THE ELECTRICAL CIRCUIT SWOWN IN FIG.1, ARE THERE RESISTORS IN PARALLEL CONFIGURATION? WHICH ONES? • We simplified the circuit and ended the exercise finding the current I4. Now we would like to calculate all the current and all the differential of potential in the circuit using Ohm’s and kirchhoff’s law. Here there are the simplified circuits

  14. Using the simplified circuits, we can calculate all the currents and the potential differences in the circuit. Let’s start with the simplest circuit where we find Using I4 in the second one you can find Using VDA in the third one we find I1 and I4

  15. At the and with I1 and I5 we can calculate

  16. END OF UNIT

  17. back

  18. back

  19. back

  20. back

  21. from 9500 Ω to 10500Ω click the blue block to check the solution

  22. back

  23. back

  24. The currents I2 and I3disappear First of all, we have to reduce the circuit replacing the two parallel resistors (R2 and R3) with the parallel equivalent resistor R23: circuit B circuit A Where R23 is and finally we replace R1 and R23 with the series equivalent resistor R123 The point in-between B disappear circuit C

  25. with I1 we find VAB and VBC in circuit B Now we can calculate I1 with Ohm’s law in circuit C with VBC we obtain I2 and I3 in circuit A back

More Related