1 / 27

PRESENTED BY

SUB:IP ADDRESS AND SUBNETTING. PRESENTED BY. ASI/RM s k satapathy. SUB:IP ADDRESS AND SUBNETTING. THIS TOPIC WILL COVER IN EIGHT PHASES. 1. INTRODUCTION 2. NECESSITY 3. DEFINITION 4. CLASSES OF IP ADDRESS 5. PUBLIC AND PRIVATE IP ADDRESS 6. SUBNETTING 7. TYPES OF SUBNETTING 8. SUM-UP.

audra
Download Presentation

PRESENTED BY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SUB:IP ADDRESS AND SUBNETTING PRESENTED BY ASI/RM s k satapathy CLICKTECHSOLUTION.COM

  2. SUB:IP ADDRESS AND SUBNETTING THIS TOPIC WILL COVER IN EIGHT PHASES. 1. INTRODUCTION 2. NECESSITY 3. DEFINITION 4. CLASSES OF IP ADDRESS 5. PUBLIC AND PRIVATE IP ADDRESS 6. SUBNETTING 7. TYPES OF SUBNETTING 8. SUM-UP CLICKTECHSOLUTION.COM

  3. INTRODUCTION OF IP • IP (Internet Protocol) is a routed protocol and it is working in layer-3(network layer).The routed protocols will be encapsulated data in the form of packets and is send out from the source to destination using best path that is given by the routing protocols.The routing protocols are used in routers(layer-3) . • There are two types of IP Addressing • IP Version4 • 2. IP Version6 CLICKTECHSOLUTION.COM

  4. OR An IP address consists of four so-called octets separated by dots. The octet is a binary number of eight digits, which equals the decimal numbers from 0 to 255. To make IP addresses more easy to read and write, they are often expressed as four decimal numbers, each separated by a dot. This format is called "dotted-decimal notation". In a local area network based on TCP/IP, an IP address must be assigned to each host (computer or device) in the network. The IP address must be unique to each host. CLICKTECHSOLUTION.COM

  5. Every computer system and device connected to the Internet is located by an IP address. The current system of distributing IP addresses is called IPv4. This system assigns each computer a 32-bit numeric address, such as 120.121.123.124. However, with the growth of computers connected to the Internet, the number of available IP addresses are predicted to run out in only a few years. This is why IPv6 was introduced.IPv6, also called IPng (or IP Next Generation), is the next planned version of the IP address system. While IPv4 uses 32-bit addresses, IPv6 uses 128-bit addresses, which increases the number of possible addresses by an exponential amount. For example, IPv4 allows 4,294,967,296 addresses to be used (2^32). IPv6 allows for over 340,000,000,000,000,000,000,000,000,000,000,000,000 IP addresses. That should be enough to last awhile. CLICKTECHSOLUTION.COM

  6. Because IPv6 allows for substantially more IP addresses than IPv4, the addresses themselves are more complex. They are typically written in this format:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhhEach "hhhh" section consists of a four-digit hexadecimal number, which means each digit can be from 0 to 9 and from A to F. An example IPv6 address may look like this:F704:0000:0000:0000:3458:79A2:D08B:4320Because IPv6 addresses are so complex, the new system also adds extra security to computers connected to the Internet. Since there are so may IP address possibilities, it is nearly impossible to guess the IP address of another computer. While most computer systems today support IPv6, the new Internet procotol has yet to be fully implemented. During this transitional process, computers are often assigned both an IPv4 and an IPv6 address. By 2008, the U.S. government has mandated that all government systems use IPv6 addresses, which should help move the transition along. CLICKTECHSOLUTION.COM

  7. NECESSITY WHEN WE ARE CONNECTING TWO OR MORE COMPUTERS TOGETHER , THEN THEY CAN COMMUNICATE EACH OTHER BY USING IP ADDRESS ON EACH MACHINE.THEY CAN NOT COMMUNICATE BY USING PHYSICAL ADDRESS. THE ARP (ADDRESS RESOLUTION PROTOCOL) WILL CONVERT THIS IP ADDRESS (LOGICAL ADDRESS) IN TO MAC ADDRESS (PHYSICAL ADDRESS).THE IP ADDRESS IS A SOFTWARE ADDRESS NOT HARDWARE ADDRESS. SWITCH PC 1 10.0.0.1 PC2 10.0.0.2 CLICKTECHSOLUTION.COM

  8. Definition of IP Version4 It is a 32 bit binary number divided in to 4 octets ,per octets 8 bits and converted in to decimal form.The IP address is a logical address which is used to assign each and evey pc on a network. 8 BIT 8BIT 8 BIT 8 BIT IP Version6 It is in hexadecimal form and it is 128 bit address. This version is currently implemented. OCTET 1 OCTET 2 OCTET 3 OCTET 4 CLICKTECHSOLUTION.COM

  9. Classes of IP addresses In order to provide the flexibility required to support differently sized networks, IP addresses come in three classes, A, B, and C. Every class fixes the boundary between the network portion and the host portion of the IP address at a different point. This makes them appropriate for different size networks. Class C addresses allow 254 hosts per network and are typically used by smaller and middle-sized companies. Class B networks allow a maximum of 16,384 hosts, while Class A networks allow more than 16 million hosts. As a consequence, Class A networks are only used by really large organisations. Calculating the number of possible hosts requires a closer look at the IP classes in their binary form. (The binary system is a base-2 number system, just like the base-10 number system is known as the decimal number system). It is done as follows: CLICKTECHSOLUTION.COM

  10. In a Class C network only the last octet is used to designate the hosts. The maximum decimal number that you can write using eight bits is 256 (28). The host calculation now requires that 2 is subtracted, because two host addresses must be reserved for a network address and a broadcast address (for a further explanation of network and broadcast addresses, see the section on ‘Subnets’). Ergo the maximum number of hosts on a Class C network is 256-2=254. A class B network allows a maximum of 16,384 hosts (216-2) per network (two octets designate the hosts). A class A network allows up to 16,777,214 (224-2) hosts per network (three octets are used to designate the hosts). CLICKTECHSOLUTION.COM

  11. CLASSES OF IP ADDRESS • CLASS A • Range:- 1 to 126 • It is designed for very large networks. • In this the first bit 0 in the first octet is reserved.So the address • from 0 to 127, but the 0 condition is not possible also 127 is used • as loop back address and it is used for checking of TCP/IP table • of system. • So the range is from 1 to 126. network host host host 0 0000000 : : 0 1111111 CLICKTECHSOLUTION.COM

  12. 2. CLASS B Range: 128 to 191 It is designed for medium sized networks. In this the first two bits in the first octet is reserved, so the address is from 128 to 191. network network host host 10 000000 : : 10 111111 CLICKTECHSOLUTION.COM

  13. 3.CLASS: C Range: 192 to 223 It is designed for large networks In this the first three bits in the first octet is reserved, so the address is from 192 to 223. network network network host 110 00000 : : 110 11111 CLICKTECHSOLUTION.COM

  14. CLASS : D Range: 224 to 239 These are multicast addresses.It requires specialised devices for multicasting like routers.In normal network computers ,it will not accepts class D addresses.It is also not available in market. CLASS :E Range : 240 to 255 It is used for scientific pupose.It is reserved by the government. CLICKTECHSOLUTION.COM

  15. PUBLIC AND PRIVATE IP ADDRESS PUBLIC IP ADDRESS These are those address that we have to purchase from the service provider (ISP). PRIVATE IP ADDRESS No need to purchase these address. Ranges of private IP address Class A: 10.0.0.0-10.255.255.255 Class B: 172.16.0.0-172.31.255.255 Class C: 192.168.0.0-192.168.255.255 CLICKTECHSOLUTION.COM

  16. SUBNETTING DEFINITION It is a technique in which larger network is divided in to smaller sub networks , so that those sub networks will not communicate with each other. OR The process of converting host bits in to network bit is called sub netting. Types of Sub -netting There are two types of sub- netting 1. Network based sub -netting 2. Host based sub -netting CLICKTECHSOLUTION.COM

  17. Subnetmask:- A subnet mask is a 32 bit value, that distinguishes the network ID portion of the IP address from the host ID portion of the Ip address. Default Subnetmask:- ClassA:- 255.0.0.0, This is because ther is only 8 network bits. ClassB:- 255.255.0.0, This is because there is 16 network bits. ClassC:- 255.255.255.0, This is because there is 24 network bits. CLICKTECHSOLUTION.COM

  18. Network based subnetting In this we are sub -netting according to the requirement of subnets.For Example:- Given a N/W ID – 40.0.0.0 Default subnet Mask- 255.0.0.0 Requirement- 10 Subnets ? Solution The formula used is, 2 power N > Required number of subnets. 2 power 4 >10, the required number of subnet is 10. Therefore N=4, it means taking 4 bits from host side in to network side. New subnet mask(NSM)= 255.11110000.00000000.00000000 = 255.240.0.0 Block Size= 256-240=16 OR The number of 0 bits remaining in that octet, that is 4 2 power 4 = 16 Network ID:- 40.0.0.0 CLICKTECHSOLUTION.COM

  19. 40. 0 . 0 . 0, subnet no1 40.16 . 0 . 0, subnet no2 40. 32 . 0 . 0, subnet no3 40. 48 . 0 . 0, subnet no4 40. 64 . 0 . 0, subnet no5 40. 80 . 0 . 0, subnet no6 40. 96 . 0 . 0, subnet no7 40.112. 0 . 0, subnet no8 40.128. 0 . 0, subnet no9 40.144. 0 . 0, subnet no10 40.160. 0 . 0, subnet no11 40.176. 0 . 0, subnet no12 40.192. 0 . 0, subnet no13 40.208. 0 . 0, subnet no14 40.224. 0 . 0, subnet no 15 40.240. 0 . 0, subnet no 16 In this total sunets is 16, but we requires only 10. So we can select any 10. CLICKTECHSOLUTION.COM

  20. Example Given an IP-100.100.100.100 Default Subnetmask-255.0.0.0 Requirement - 5 subnet ? Solution 2 power 3 > 5 So, N= 3 New subnetmask- 255.11100000.00000000.00000000 = 255.224.0.0 Block size = 256-224=32 OR 2 power 5 =32 CLICKTECHSOLUTION.COM

  21. Network ID:- To get the network ID perform the logical AND operation between the given IP and default subnetmask. 100.100.100.100 255. 0 . 0 . 0 That is, 01100100 . 01100100 . 01100100 . 01100100 11111111 . 00000000 . 00000000 . 00000000 01100100 . 00000000 . 00000000 . 00000000 That is, 100. 0. 0. 0, subnet no1 100.32. 0. 0, subnet no2 100.64. 0. 0, subnet no3 100.96. 0. 0, subnet no4 100.128.0.0, subnet no5 100.160.0.0, subnet no6 100.192.0.0, subnet no7 100.224.0.0, subnet no8 CLICKTECHSOLUTION.COM

  22. 1. Total number of subnets ? 2 power 3 = 8, that is the total number of bits converted from 0 to 1 in NSM. 2. Total number of hosts ? 2 power 21 =2097152, that is total number of bits still 0 in all octets in NSM. 3. Total valid hosts ? Total number of valid hosts = Total hosts - 2 That is 2097152 - 2=2097150(reserver for nerwork address and broad cast address 4. Given IP belongs to which subnet ? To get this perform the logical AND operation between the given IP and New subnet mask (NSM) 01100100 . 01100100 . 01100100 . 01100100 11111111 . 11100000 . 00000000 . 00000000 01100100 . 01100000 . 00000000 . 00000000 That is, 100.96.0.0 That means the given IP belongs to 4th subnet. CLICKTECHSOLUTION.COM

  23. 5. 1st and last valid IP of 5th subnet ? 1st valid IP- 100.128.0.1 Last valid IP-100.159.255.254 6. Last valid IP of last subnet ? Last valid IP-100.255.255.254 CLICKTECHSOLUTION.COM

  24. 2. HOST BASED SUBNETTING In host based subnetting , we are subnetting according to the requirement of hosts per subnets. Example 200.200.200.200/24 Requires 10 hosts per subnets Subnetmask-255.255.255.0 ? Solution Network ID- 200.200.200.0, That is logical AND operation between given IP and Default subnetmask. The formula is 2 power N - 2 > Required hosts per subnets. 2 power 4 - 2>10 That is N = 4, That means leave last 4 bits as zero in host side. New subnetmask (NSM):- 255.255.255.1111 0000 That is 255.255.255.240 Block size 256-240 =16 CLICKTECHSOLUTION.COM

  25. 200.200.200.0, first subnet 200.200.200.16 200.200.200.32 : : : : : 200.200.200.240, last subnet 1. Total number of subnets ? 2 power 4 =16, That is total number of bits converted from 0 to 1 in NSM 2. Total Hosts ? 2 power 4 = 16, That is total number of bits still 0 in in all octets in NSM 3. Valid number of hosts ? Total hosts-2, That is 16-2= 14 CLICKTECHSOLUTION.COM

  26. 4. Given IP belongs to which subnet ? 200.200.200.200 255.255.255.240 200.200.200.192, That is logical AND operation between given IP and NSM. The given IP belongs to 13th subnet, That is the logical AND operation between given IP and NSM. CLICKTECHSOLUTION.COM

  27. SUMUP THANK YOU CLICKTECHSOLUTION.COM

More Related