How to Manage if you Spill Water on your Lenovo Laptop?

1. How to Manage if you Spill Water on your Lenovo Laptop

2. There is nothing more dreadful than the thought of spilled liquid on to your computer. This fear increases while you are using Lenovo Laptop. While the computer is indeed adequate in a stylish way, a little liquid to its internal components can completely eradicate even its most basic functionality. But in truth there is indeed a way to salvage your computer. Just remember, time is of the essence.

3. Quickly follow the open, wipe and dry technique to prevent spilling damage Whenever your computer suffers some liquid spilling, the nature of liquid always determines the consequent effects. To that end, believe it or not but water is the least damaging, while sugary stuff causes malfunctions that go beyond just the spilling damage. But I digress; the next few minutes after spilled water are the most crucial. Lenovo Support Australia suggests that within this few moments, you have to quickly open wipe and dry your Lenovo laptop.  With that in mind, follow the following process:

5. Unplug the power:  The very first step is indeed the most crucial one as well. Furthermore, you also have to keep in mind the deadly water electricity while shutting down the system. Be swift and press the power button to shut down the laptop. Don’t bother with going through proper shutting down steps; again time is indeed of the essence.  Drain the access water: Hold your computer on the sides, Lift it up, and let gravity do its job and drain the system. Make sure every access water droplet is gone. Furthermore, also wipe the surface to complete dry out the outside of the hardware. Use a dry cloth to accomplish this task. 

6. Disassemble: Now that you have dried out the surface of your hardware. It is now time to deal with the internal components. To do this, it is disassembly time for the laptop. The very first step about stripping down the laptop is the removal of battery. To that end, turn your hardware around, slide the battery lock and lift the power bank to remove it. Once battery is removes, you now have to remove the rest of the internal components. Luckily enough, Lenovo has already specified the points of disassembly and the width of the tools needed to remove the components. To that end, follow the below mentioned order of removal:

8. Look to the sides of your laptop, you would notice a section for hard drive, unscrew the surface and remove the hard disk. Put in the screw on the keypad, pop it out and disconnect its ribbons to the motherboard.  Follow the same procedure with the trackpad. Now, it is time to remove the screen; make sure you have a butter knife handy.  Remove the screen and place it in a clean position.  Once the internal surface is full revealed, you can now easily remove the Wi-Fi, internal drive, optical drive and other components.

9. Leave then out to dry and drain: take each and every one of these disassembled component, and after wiping them with a dry cloth, leave them out to complete remove the moisture. Make sure that you leave them in a place with no contamination.

10. Not going to lie, this entire disassembling deal is better left to the technical experts. To that end, make sure you have Lenovo support number1-800-894-139 handy. The technicians of Lenovo Technical Support Australia, are better suited to this task of disassembly On further note, if you do end up following the given instructions, make sure that you take all the necessary precautions regarding your safety and the system’s well being. Original Source