1 / 11

XLR Cables

XLR Cables. How to assemble your own XLR in 10 easy steps!. 1. Cut a length of cable. 2. Slide a shield over the end of the Cable. 3. Strip the end of the rubber of off the wire. 4. Separate the shield (ground) wires from the hot and cold wires. Strip the ends of the hot and cold.

aurora
Download Presentation

XLR Cables

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. XLR Cables How to assemble your own XLR in 10 easy steps!

  2. 1. Cut a length of cable

  3. 2. Slide a shield over the end of the Cable

  4. 3. Strip the end of the rubber of off the wire

  5. 4. Separate the shield (ground) wires from the hot and cold wires. Strip the ends of the hot and cold.

  6. 5. Position the wire and the XLR head (male) into the clamp. Get ready to solder!

  7. 6. Place the shield (ground) wire into receptor No. 1 and solder into place

  8. 7. Repeat the process for the hot and cold wires; the red (hot, +) solders to receptor No. 2, and the black (cold, -) to No. 3.

  9. 8. Repeat steps 2 through 7 for the other end of the Cable (female)

  10. 9. Check connections. Test each contact on one end with each contact on the other (9 tests). There should only be a reading for like connections (hot-hot, cold-cold, ground-ground).

  11. 10. Screw the shields onto the XLR heads, hold the cable proudly, and admire your work!

More Related