20 th Anniversary Scientific-Educational Center of SHS MISIS-ISMAN

1. 20th AnniversaryScientific-Educational Center of SHSMISIS-ISMAN International Workshop "Synthesis and Commercialization of Advanced Nanostructured Materials and Coatings" October 22, 2009 Leninsky prospect 4, Moscow, 119049 Organizers of the Event ● State Technological University “Moscow Institute of Steel and Alloys” (MISIS) ● Institute of Structural Macrokinetics and Materials Science Problems of the Russian Academy of Science (ISMAN) Event is supported by ● State Technological University “Moscow Institute of Steel and Alloys” ● Federal Agency for Science and Innovations(FASI) ● Russian Academy of Science ● Russian Academy of Natural Science Workshop Co-Chairmans: Prof. Evgeny Levashov Prof. Alexander Merzhanov International Committee Members Prof. Inna Borovinskaya, Russia Dr. Satoru Hosomi, Tomei Diamond Co., Ltd., Japan Prof. Yury Karabasov, State DUMA, Russia Prof. Dmitry Livanov, MISIS, Russia Dr. Slobodan Milonich, The Vinca Inst. of Nuclear Sc., Serbia Prof. John Moore, Colorado School of Mines, USA Prof. Dmitry Shtansky, MISIS, Russia Dr. Richard Suchentrunk, Galvanotechnik Journal, Germany Dr. Alexei Yerokhin, University of Sheffield, United Kingdom

2. Workshop is devoted to20 years Anniversary of Scientific-Educational Center of SHS MISIS - ISMAN (SHS-Center). Nowadays the SHS-Center is a multidisciplinary scientific-educational center with a wide area of scientific activity: SHS, mechanical activation assisted SHS (MA SHS), physics of combustion, structural macrokinetic, material science of ceramics, intermetallides, composites and functionally graded materials, nanostructured materials, hard- wear- corrosion- heat- resistant coatings, biocompatible thin films and coatings, nanodispersion strengthened coatings, surface engineering technologies i.e. magnetron sputtering, ion implantation, ion implantation assisted magnetron sputtering, pulse electrospark deposition (PED), chemical reaction assisted PED (CRAPED), attestation and metrology of mechanical and tribological properties of nanostructured surfaces. The expertise and research leadership of SHS- Centre is evidenced by above 600 publications on mentioned fields of expertise in referees journals, books, proceedings, and multiple patents and “know-how” on the technologies. The teams of SHS- Centre collaborates with leading research centres in the USA,Japan, Europe, and Asia. Staffs of SHS- Centre are members of International Association on SHS (SHS-AS), Int. Committee on SHS, European Joint Committee for Plasma and Ion Surface Engineering (EJC/PISE), International Advisory Committee on FGM, Int. Committee on Metallurgical Coatings and Thin Films, Int. Committee of World Ceramic Congress CIMTEC. SHS-Center is a current member of the Advanced Coatings and Surface Engineering Laboratory (ACSEL) at the Colorado School of Mines.

3. SCIENTIFIC PROGRAM (Draft) Welcome Addresses 10.00 – 10.30 Session I “SHS of Advanced Materials”:10.30 – 12.10 Session Chairs: Dr. Satoru Hosomi, Dr. Slobodan Milonich 10:30 – 10:50Combustion Mechanism in Ti-Ta-C System. Structure Formation and Oxidation Resistance of SHS- products Evgeny Levashov, V.Kurbatkina, A. Rogachev, N. Kochetov, E. Patsera 10:50 – 11:10SHS- Die Casting of Metal Matrix Composites John Moore 11:10 – 11:30 Dense in situ Ceramic Matrix Composites via Pressure Assisted Thermal Explosion Mode of SHS: From Basic Research to Fabrication of Structural  Parts Elazar Gutmanas and I. Gotman 11:30 – 11:50 New Classes of SHS Processes Alexander Rogachev 11:50 – 12:10 Welding of Rails by Original “VINCA” Aluminothermite Mixture; Some Experience Gained in Serbia Misa Todorovic, M. Trtanj Awarding Ceremony 12.10 – 12.30 Lunch12.30 – 13.30 Session II “Functional Coatings and Thin Films”:13.30 – 14.50 Session Chairs: Prof. John Moore, Prof. Evgeny Levashov 13:30 – 13:50 Search for Ultrahard Materials and Recent Progress in the Understanding of Hardness Enhancement and Properties of Nanocomposites Stan Veprek 13:50 – 14:10 Multifunctional Bioactive Nanostructured Films for Metallic Implants Dmitry Shtansky, I.A. Bashkova, N.A. Gloushankova, Ph.V. Kiryukhantsev-Korneev, A.N. Sheveiko, I.V. Reshetov, A.S. Grigoryan, B.N. Mavrin, A. Fernandez, E.A. Levashov 14:10 – 14:30 Nanocomposite Coatings with Thermal Stability and Protection of Substrate Against Oxidation Above 1000C Jindrich Musil

4. 14:30 – 14:50 Advanced Plasma Electrolytic Oxidation Methods to Enhance Functional Performance of Light-Weight Materials Alexei Yerokhin, A Matthews 14:50 – 15:10 From Micro to Nano – 20 Years Thin Film and Plasma Technology Richard Suchentrunk 15:10 – 15:30 Nano-particle Doped Sol Gel Coatings For Active Corrosion Protection of Aluminum Alloys Franz Gammel, Dominik Raps, Theo Hack Coffee Break and Poster Session 15.30 – 16.50 Session III “Advanced Nanosized Materials” : 16.50 – 17.50 Session Chair: Dr. Richard Suchentrunk, Dr. Alexei Yerokhin 16:50 – 17:10 The Properties of Submicron Single Crystalline Diamond Particles Satoru Hosomi, H. Yamanaka, S. Morino, K. Kumekawa 17:10 – 17:30 Stable Colloidal Dispersions of Metal Oxides. Synthesis, Properties and Applications Slobodan Milonjic 17:30 – 17:50 Synthesis of Nanostructures in Bulgaria. Advanced Technologies and Their Application Stavri Stavrev BANQUET: 18.00 - 22.00 In Restaurant near MISIS

5. Poster Session 1. Pulse Electrospark and PVD Deposition of Cr-Based Sublayer on WC-6%Co Substrate for Quality Improvement of CVD Diamond Film E.V. Azarova, E.A. Levashov, E.I Zamulaeva, V.G. Ralchenko, A.P. Bolshakov, S. Hosomi 2. Combustion Features in Some Nanostructured System H.E. Grigoryan, A.S. Rogachev 3. Formation of Porosity CoTi-Materials by SHS O.K. Kamynina, I. Gotman, E. Gutmanas, A.E. Sytschev, S.G. Vadchenko and E.N. Balikhina 4. Amorphous Cr-Al-Si-B and Cr-Al-Si-B-N Coatings Deposited by Magnetron Sputtering of SHS-Targets Ph.V. Kiryukhantsev-Korneev, J.F. Pierson, J.Ph. Bauer, E.A. Levashov, D.V. Shtansky 5. Effect of Nitrogen Partial Pressure on Structure and Properties of Hard Cr-B-(N) Coatings Ph.V. Kiryukhantsev-Korneev, A.N. Sheveyko, Yu.S. Pogozhev, J.F. Pierson, B.N. Mavrin, E.A. Levashov, D.V. Shtansky 6. Hard Nanostructured Coatings for High-Temperature Tribological Applications Ph.V. Kiryukhantsev-Korneev, A.N. Sheveyko, E.A. Levashov, R. Cecchini, C. Paternoster, A. Fabrizi, D.V. Shtansky 7. Hard Nanostructured Coatings Produced by Magnetron Sputtering of MAX-phaseTi2-xCrxAlC targets Ph.V. Kiryukhantsev-Korneev, A.N. Sheveiko, C. Rojas,A. Fernandez, B.N. Mavrin, E.A. Levashov, D.V. Shtansky 8. Structure, Mechanical and Tribological Properties of Hard Ti-Al-Si-C-N Coatings Ph.V. Kiryukhantsev-Korneev, A.V. Bondarev, I.A. Bashkova, E.A. Levashov, D.V. Shtansky

6. 9. About Mechanical Activation Influence on the Particular Properties and Structure of Ni+Al and Ti+Al Mixtures Kochetov N. A, Rogachev A.S. Ko valev D. Yu. 10. Dispersion Hardening Ceramic Materials Produced Using SHS V.V. Kurbatkina, E.A.Levashov, O.S. Lysenko 11. Mechanoactivation of SHS V.V. Kurbatkina, E.A.Levashov, A.S. Rogachev 12. Nanodispersion Strengthened Electrode Materials for Pulse Electrospark Deposition Е. А. Levashov, А. Е. Kudryashov, Yu. S. Pogozhev, Е. I. Zamulaeva, S.K. Мilonjic, M. Todorovic 13. Pulsed Electrospark Deposition of Low Friction Coatings Е. А. Levashov, А. Е. Kudryashov, Е. I. Zamulaeva, Zh. V. Eremeeva 14. Industrial Application of New Electrode Materials, Facilities, and Processes for PED Е. А. Levashov, А. Е. Kudryashov, Е. I. Zamulaeva, Yu. S. Pogozhev, А. N. Sheveiko 15. Chemical Reaction Assisted Pulsed Electrospark Deposition (CRAPED) Е. А. Levashov, А. Е. Kudryashov, Е. I. Zamulaeva, S. Hosomi 16. Diamond Containing FGMs and Disperse-Strengthened by Nanoparticles Tools E.A. Levashov, V.V. Kurbatkina, A.A. Zaitsev, V.A. Andreev, S. Hosomi, M. Ohyanagi 17. Self-Propagating High-Temperature Synthesis of Electrode Materials Dispersion-Strengthened With Nanoparticles for Pulse Electrospark Deposition E.A.Levashov, Yu.S. Pogozhev, A.E. Kudryashov, S.K. Milonjic, M. Todorovic 18. New Composite Ceramic Materials in Ti-Al-Si3N4-C System Produced by Combustion Synthesis E.A. Levashov, Yu.S. Pogozhev, D.V. Shtansky, J.J. Moore

7. 19. Nanostructured WC–Co-Based Electrode Materials Е. А. Levashov, Е. I. Zamulaeva, А. Е. Kudryashov 20. Effect of Mechanoactivation on Combustion and Structure Formation in Cr – B System E. I. Patsera, E.A. Levashov, V.V. Kurbatkina, A.S. Rogachev, N.A. Kochetov 21. The Attestation of Functional Properties of Nanostructured Coatings by Advanced Mechanical Surface Testing M.I. Petrzhik, M.Ya. Tyurina, N.S. Kozlova, E.A. Levashov 22. Amorphous Nanostructured Wear Resistant Coatings of Titanium Alloys for Tribological Applications M.I. Petrzhik, M.Ya. Tyurina, E.I. Zamulaeva, T.V. Sviridova, V.V. Molokanov, P.V. Vakaev, E.A. Levashov 23. Characterization of As-Quenched Co-Based Silica Glass Covered Microwires by Selective Indentation and AFM M.I. Petrzhik, E.V. Zamyatkina, M.R. Filonov, E.A. Levashov, V. V Molokanov 24. Self-Propagating High-Temperature Synthesis of Mn+1AXn Phases in Ti-Cr-Al-C System Yu.S. Pogozhev, S.I. Rupasov, E.I. Patsera, V.V. Kurbatkina, E.A. Levashov 25. Effect of Mechanical Activation on Synthesis of MAX- phases CrxTi2-xAlC S.I. Rupasov, V.V. Kurbatkina, E.A. Levashov 26. Multilayer and Nanocomposite TiCrBN/WSex Coatings with Reduced Friction Coefficient A.N. Sheveyko, Ph.V. Kiryukhantsev-Korneev, B.N. Mavrin, D.V. Shtansky 27. Effect of Nanosized Additives on Sintering Process and Properties of Cobalt and Iron Based Alloys A.A. Zaitsev, V.V. Kurbatkina, E.A. Levashov 28. Determination of Particle Size and Microstrain of Mechanically Activated Nanostructured Materials Based on XRD and SEM data N. F. Shkodich, R. B. Neder, A. Magerl, A.S.Rogachev More info & contact persons: Mrs. Olga Lysenko, e-mail:exviventy@mail.ru; tel: +495-638-44-09 Dr. Irina Bashkova, e-mail: ibashkova@mail.ru; tel: +495-236-32-91