1 / 17

Beam Deflection (9.1-9.5)

Beam Deflection (9.1-9.5). MAE 314 – Solid Mechanics Yun Jing. Introduction. Up to now, we have been primarily calculating normal and shear stresses. In Chapter 9, we will learn how to formulate the deflection curve (also known as the elastic curve ) of a beam.

axel-montgomery
Download Presentation

Beam Deflection (9.1-9.5)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Beam Deflection(9.1-9.5) MAE 314 – Solid Mechanics Yun Jing Beam Deflection

  2. Introduction • Up to now, we have been primarily calculating normal and shear stresses. • In Chapter 9, we will learn how to formulate the deflection curve (also known as the elastic curve) of a beam. Beam Deflection

  3. Differential Equation of Deflection ds dy Recall from Ch. 4 that 1/ρ is the curvature of the beam. θ dx y Slope of the deflection curve Beam Deflection

  4. Assumptions • Assumption 1: θis small. • 1. • 2. • Assumption 2: Beam is linearly elastic. • Thus, the differential equation for the deflection curve is: Beam Deflection

  5. Diff. Equations for M, V, and w • Recall from Ch. 5: • So we can write: • Deflection curve can be found by integrating • Bending moment equation (2 constants of integration) • Shear-force equation (3constants of integration) • Load equation (4constants of integration) • Chosen method depends on which is more convenient. Beam Deflection

  6. Boundary Conditions • Sometimes a single equation is sufficient for the entire length of the beam, sometimes it must be divided into sections. • Since we integrate twice there will be two constants of integration for each section. • These can be solved using boundary conditions. • Deflections and slopes at supports • Known moment and shear conditions Beam Deflection

  7. Boundary Conditions Section AC: yAC(x) Section CB: yCB(x) • Continuity conditions: • Displacement continuity • Slope continuity • Symmetry conditions: Beam Deflection

  8. Example Problem For the beam and loading shown, (a) express the magnitude and location of the maximum deflection in terms of w0, L, E, and I, (b) Calculate the value of the maximum deflection, assuming that beam AB is a W18 x 50 rolled shape and that w0 = 4.5 kips/ft, L = 18 ft, and E = 29 x 106 psi. Beam Deflection

  9. Statically Indeterminate Beams • When there are more reactions than can be solved using statics, the beam is indeterminate. • Take advantage of boundary conditions to solve indeterminate problems. Problem: Number of reactions: 3 (MA, Ay, By) Number of equations: 2 (ΣM = 0, Σ Fy = 0) One too many reactions! Additionally, if we solve for the deflection curve, we will have two constants of integration, which adds two more unknowns! Solution: Boundary conditions x=0, y=0x=0, θ=0 x=L, y=0 Beam Deflection

  10. Statically Indeterminate Beams Problem: Number of reactions: 4 (MA, Ay, MB, By) Number of equations: 2 (ΣM = 0, Σ Fy = 0) + 2 constants of integration Solution: Boundary conditions x=0, y=0x=0, θ=0 x=L, y=0x=0, θ=0 Beam Deflection

  11. Example Problem For the beam and loading shown, determine the reaction at the roller support. Beam Deflection

  12. Beam Deflection: Method of Superposition (9.7-9.8) MAE 314 – Solid Mechanics Yun Jing Beam Deflection: Method of Superposition

  13. Method of Superposition • Deflection and slope of a beam produced by multiple loads acting simultaneously can be found by superposing the deflections produced by the same loads acting separately. • Reference Appendix D (Beam Deflections and Slopes) • Method of superposition can be applied to statically determinate and statically indeterminate beams. Beam Deflection: Method of Superposition

  14. Superposition • Consider sample problem 9.9 in text. • Find reactions at A and C. • Method 1: Choose MC and RC asredundant. • Method 2: Choose MC and MA as redundant. Beam Deflection: Method of Superposition

  15. Example Problem For the beam and loading shown, determine (a) the deflection at C, (b) the slope at A Beam Deflection: Method of Superposition

  16. Example Problem For the beam and loading shown, determine (a) the deflection at C, and (b) the slope at end A. Beam Deflection: Method of Superposition

  17. Example Problem For the beam shown, determine the reaction at B. Beam Deflection: Method of Superposition

More Related