1 / 14

Product information,

Product information,. Features & benefits. EUROBLOC VT Main characteristics. www.emmegiesse.com. Particularities - Minimum displacement of hook block - Best C dimension of the market - Best hook approach of the market

axelle
Download Presentation

Product information,

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Product information, Features & benefits

  2. EUROBLOC VTMain characteristics www.emmegiesse.com Particularities - Minimum displacement of hook block - Best C dimension of the market - Best hook approach of the market - Variable travelling speed (2 control modes, MS control in standard) - Hook with handle - Hoisting speed ratio is 1/6, between 1/4 and micro speed for smooth starting Speed Speed Time Time

  3. www.emmegiesse.com EUROBLOC VTMain characteristics EUROBLOC VTMain characteristics Particularities (part 2) - Hoisting brake setting for the hoist life (in normal use) and with dust protection - Cooling of the motor increased of 30% (tunnel effect) - Rope guide for all types of environment (dusty, clean,…) - High quality rope for long life service (flexibility, parallel lay) - Automatic low hoisting speed at C approach. - Phase fault safety hoisting limit switch - Modular construction with the minimum of parts - Easy maintenance - Wide range of features

  4. EUROBLOC VTMain Sales Arguments www.emmegiesse.com Safety Travelling. Variable travelling speed for precise positioning of loads. Wire rope. in galvanized steel as a standard, high safety factor (factor 4,6 -FEM 2m). Electrical cubicle. The cover can be folded back so that you can store your tools for maintenance (the cover has two steel safety wires to prevent it from falling). MT2. Electronic control of the recording of hoist solicitation status. Electrical. Low voltage control for more safety. Traverse wheels. The 4 steering wheels are fully streamlined for improved safety. Hook and pulley block. Rotating hook and pulley block with safety latch.

  5. EUROBLOC VTMain Sales Arguments www.emmegiesse.com Easy maintenance Hoisting motor. Motor cooling increased by 30 % (tunnel effect) Hoisting brake . The brake is tested for hoist longevity under normal use conditions. Steering motor-reducer. Steering reducer with one rail and a permanently lubricated connection. Drum. The drum has been completely covered for better protection Rope guide. Built “without spring” so that it can be more easily replaced during maintenance. Electrical cubicle. The wires go in and out by means of steel plugs that can be unbound and that are built into the case MT2. Calculation of the SWP (Safe Working Period) Assembly is in modules, for easier management of spare parts for replacement Surface treatment. 2- component epoxy paint with 120 µ for greater protection

  6. EUROBLOC VTMain Sales Arguments www.emmegiesse.com Ergonomics Hook and pulley block. Ergonomical hook (area to grab and hold). Push button box. Made with tinted polypropylene, grounded, with double insulation, ergonomical (IP 65 protection). Optional load display available Electrical cubicle. Located on the side of the hoist, easily accessible. The open / close system uses a quick closure method.

  7. EUROBLOC VTMain Sales Arguments www.emmegiesse.com High technology Pulley block. Only a small shift of the pulley block for hoisting (lifting is almost perfectly centred). Rope guide. The guidance system does not get dirty, which allows for use in any type of environment. Drum. A very high wire rope / drum diameter ratio (twice as large as the standard one), which: • Increases the longevity of the wire rope. • Reduces the approach data of the hoist. • Reduces the “C” approach data of the hook. Electrical case. Quite large, it is equipped with the speed variation module as a standard Lifting gearbox. Direct impulse gearbox unit, helicoid toothed gears, permanently lubricated, detector to prevent pressure overload. Optimal positioning of steering rollers. The 4 steering rollers equally share the load in order to optimise your tracks

  8. EUROBLOC VTMain Sales Arguments www.emmegiesse.com Savings Hoisting motor. 60 % operating factor and tropicalised as a standard for greater longevity Travelling motor. Tropicalised as a standard for greater longevity Pulley block. The best «C» dimension on the market for optimal use of the size of your buildings and optimal use of work areas Travelling. Variable travelling speed to reduce wear on steering rollers Load limiter. As ordered by the directive on “Machines” (required equipment). AllEUROBLOC VTs are equipped with a load limiter as a standard (safety measure in the event of hoist overload). For greater longevity Hook and pulley block. Doesn’t take up much space, permanently lubricated rollers,pulleys are in GGG cast iron, very resistant. A high pulley / wire rope diameter ratio gives the wire rope greater longevity.

  9. EUROBLOC VT Version www.emmegiesse.com • Foot mounted version• Normal headroom trolley version• Short headroom trolley version • Double girder trolley version

  10. EUROBLOC VT Special execution www.emmegiesse.com EUROBLOC EX Explosion proof and / orspark proof version

  11. EUROBLOC VT Trolley www.emmegiesse.com FOOT MOUNTED (FIXED)The foot mounted hoist is fixed to the floor with 6 screws. The end point position, reversing pulley and big drum diameter allow to have a very small C dimension and a compact hoist. A fixed suspended hoist is available in option.

  12. EUROBLOC VT Trolley www.emmegiesse.com LOW HEADROOM TROLLEY The LHT construction with a medium end point position, a medium reversing pulley position and a big drum diameter allow to have a very small C dimension. On one side of the girder, there is the hoisting machinery and on the other side, There are the travelling machinery and the electric cubicle, so that allows to balance the weight to each side of the girder (only 1 or 2 small counter-weight) and the width of the hoist is smaller. The C-dimension (distance between the hook and the running surface of the girder) is according tothe girder width (B) and to the load.

  13. EUROBLOC VT Trolley www.emmegiesse.com PERPENDICULAR DOUBLE GIRDER TROLLEYThe DGT has a high, medium or low construction (hoist is between the end-truck). The hoist is fixed to only one box girder thanks to two plates with an articulation for the maintenance. The cubicle is fixed to the other side of the box girder on the travelling machinery side. Smaller and bigger rail gauge are possible as different heights of box girder.

  14. EUROBLOC VTGeneral www.emmegiesse.com • 2-year warranty • Product complies with CE regulations • Manufacturing is ISO9001 certified • Each hoist is tested in VERLINDE facilities and delivered with individual test report • All main components are manufactured by our group or under our quality surveillance.

More Related