40 likes | 74 Views
Safe at Heights offers a unique range of services. They hold a QBCC licence for both Building/carpentry and Structural Steel fabrication and erection.
E N D
Safe at Heights Published by: https://www.safeatheights.com.au/
Safety must be the first consideration when working on roofs or window washing on high-rise buildings, so it is essential to be familiar with fall arrest anchors and window- washing equipment designed to prevent falling. There are many different types of safety equipment available. Some, such as tieback anchors, are attached to the structure as a permanent part of the building. Others, such as roof walks, are intended for temporary use, and are installed only for as long as it takes to complete the project. Chekout ladder brackets. Falling is the primary cause of death on construction sites throughout the United States, resulting in dozens of deaths annually. Accidents such as these are responsible for more than 100,000 injuries on construction jobs every year. To address these issues, the Occupational Safety and Health Administration (OSHA) has established regulations for safety equipment that apply throughout the country. OSHA considers there to be a danger of accidental falls any time a worker is working four feet (1.2 meters) or more off the ground. In addition to the OSHA regulations, with which compliance is required, recommendations for safe work site standards are made by ANSI (American National Standards Institute). The applicable ANSI recommendations are listed in ANSI Z359.
OSHA recently issued new standards governing fall arrest and window washing equipment. For builders and roofers working on residential properties that information is found under Title 29 Code of Federal Regulations (CFR)1926.501(b)(13). Construction companies must comply with the new rules no later than June 16, 2011. OSHA provides compliance literature, training materials, and webinars (seminars presented on the internet) for small businesses.Visit ceiling access hatch. There are two approaches to dealing with construction site falling hazards: Either eliminate the hazard or provide appropriate protection. Sometimes eliminating the danger is not an option. The best alternative in such situations is to provide personal protection equipment. Every project and every work site is unique, so it is imperative to look at every possible means of preventing falls. Click fall arrest harness. Fall arrest anchors or roof anchors are attached permanently to the roof. Anchor posts can be installed on a variety of roof types including wood, concrete, standing seam, membrane, built-up, and metal sheathing. It helps mitigate the danger by rotating in the
direction of the fall to absorb and reduce the pull. It is useful for roof maintenance or inspection, especially for HVAC systems, vent fans, air conditioning, and solar panels; for cleaning skylights; for cleaning rain gutters; and for installing satellite dishes.Personal protection equipment consists of body belts and full-body harnesses; a body belt is used with a full-body harness. Belts used by telephone or cable linemen may be fixed, semi-floating or free-floating.Checkout anchor points. Summary: Safe at Heights offers a unique range of services. They hold a QBCC licence for both Building/carpentry and Structural Steel fabrication and erection. Visit this site to learn more: https://www.safeatheights.com.au/roof-walkways-guard-railing/