1 / 2

Issue description

Issue description. Power supply : 3.3V Set I2C as interface select ed . (Slave address set as “E0” by A0 & A1) Use USB DAQ board as the master to access the register of AIC22. But the communication not worked. No Ack from AIC22. No acknowledge respond from AIC22.

barclay-jacobson
Download Presentation

Issue description

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Issue description • Power supply : 3.3V • Set I2C as interface selected. • (Slave address set as “E0” by A0 & A1) • Use USB DAQ board as the master to access the register of AIC22. But the communication not worked.

  2. No Ack from AIC22 No acknowledge respond from AIC22

More Related