1 / 4

TMO-100 V3 Modem Upgrade Information May 2015

Informative guide on upgrading TMO-100 V3 TETRA Data Modem with hardware and software changes for enhanced performance and compatibility. Includes new features and upgrade procedures. Visit www.piciorgros.com for more details.

barrylemons
Download Presentation

TMO-100 V3 Modem Upgrade Information May 2015

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TETRA Modem TMO-100 Change and Upgrade Information for Version V3 May 2015 Funk-Electronic Piciorgros GmbH

  2. HW and SW Upgrade of the TMO-100 V3 TETRA Data Modem • TMO-100 V3 is 100% compatible with TMO-100 Version V2 • DIP-10 Switch on the bottom of the device has been removed • Single press button on the back of the device to be used for getting a temporary default IP and (optional) resetting the TMO-100 to factory default • The TMO-100 RJ45 connector on the top is now a Dedicated Port for Expansion I/O Modules (I/O Version only) • Dedicated Connector for Voice Communication using the Piciorgros Handset (HW Option on order) • The former AUX-Interface providing an RJ11 connector on the bottom of the unit has been replaced by a D-Sub 9 on top of the TMO • All software upgrades (including the TETRA Core) for the TMO-100 are now done via the Ethernet port • Logger Data is now captured via the AUX port (RS-232) • The RF Display has now one Red LED (RF0) indication the sensitivity margin for safe data communication • The RF-LED’s are now calibrated and show the RSSI in 5 db steps • A new AMA LED indicates wrong Antenna (or cable) Matching • The device (Option) covers 370 MHz – 430 MHz in one Frequency Band • The TMO now provides the option OTA with Fallback Capability (Over The Air upgrade) • New Cyber Security Features added (see separate information) • Antenna Connector changed to SMA (better shielding than BNC)

  3. Funk - Electronic Piciorgros GmbH Claudiastr. 5 51145 Köln-Porz Germany www.piciorgros.com www.TetraModem.com

More Related