1 / 15

GAS TURBINE POWER PLANT MODERNIZATION OF THE GAS COMBUSTION UNITS OF ANY CAPACITY HIGHLY EFFICIENT

C НЕ MTRADE ESTONIA OÜ. GAS TURBINE POWER PLANT MODERNIZATION OF THE GAS COMBUSTION UNITS OF ANY CAPACITY HIGHLY EFFICIENT LOW EMISSION N О x и CO. Our goal : Pure environment. Savings Reliability. MULTI-FUEL GAS TURBINE POWER PLANTS MULTI-FUEL GAS TURBINE ENGINE D – 336

barton
Download Presentation

GAS TURBINE POWER PLANT MODERNIZATION OF THE GAS COMBUSTION UNITS OF ANY CAPACITY HIGHLY EFFICIENT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CНЕMTRADE ESTONIA OÜ GAS TURBINEPOWER PLANT MODERNIZATION OF THE GAS COMBUSTION UNITS OF ANY CAPACITY HIGHLY EFFICIENT LOW EMISSION NОxи CO

  2. Our goal:Pure environment SavingsReliability

  3. MULTI-FUEL GAS TURBINE POWER PLANTS MULTI-FUEL GAS TURBINE ENGINE D – 336 MODERNIZATION OF GAS COMBUSTION UNIT OF ANY VOLUME FOR TURBINES, BOILERS AND INDUSTRIAL FURNACES HIGHLY EFFICIENT LOW EMISSIONNОxandCO SUPPLY OF EQUIPMENT DESIGN AND CONSTRUCTION RECONSTRUCTION AND MODERNIZATION WARRANTY AND SERVICE

  4. GAS TURBINE POWER PLANTPAES-2500 The purpose of the unit is to supply electric energy to industrial and domestic facilities, to compensate for lack of energy during peak loads, and to operate on a standby basis. The unit is a mobile automated installation. The unit is equipped with system for starting and accepting loads with subsequent continuous operation, the systems of protection and indication of the state of the main engine parameters, as well as the modular noise suppression system. Operator’s compartment is separated from equipment room by double wall. Main advantages: • high reliability; • works steadily as independent unit and in parallel with external power system; • features high maintainability and is simple and easy to control; • does not require big investments for putting into operation; • transportability. Basic specifications: Power, kW: rated - 2,500 maximum - 2,750 Current - AC, three-phase Voltage, V - 6,300/10,500 Frequency, Hz - 50 Fuel - natural and casing-head gas Drive net efficiency at rated load, % (without regard to losses at the input and exhaust) -24 Overall dimensions, m (without noise suppressor) - 11.4x2.5x3.7 Weight, kg (without noise suppressors) - 28,500

  5. GAS TURBINE POWER PLANTBASED ON GAS TURBINE ENGINED-336 Technical characteristics: Main features: • High quality of generated energy; • High reliability; • High environmental indicators; • Transportability and high degree of prefabrication; • supplied with all the equipment, which provides autonomy.

  6. MULTIFUEL GAS TURBINE ENGINE D – 336

  7. GAS TURBINE ENGINE D-336 • Quantity ofGTEtype D-336 in usage - 154 pieces • The total operating time ofGTE D-336 - more than2 500 000 hours Gas Turbine Engines D-336 are used as a gas compressor drive, gas liftingandcrude oil pumping aggregatesof capacity 6,3 МW, and also as a power plants generator drives.Engines successfully operate in different climatic zones at an ambient temperature from -60 ° C to +50 ° C at altitudes above sea level up to 2000 m.

  8. GAS TURBINE ENGINED-336TECHNICAL CHARACTERISTICS • Engine Modification: D-336-1, D-336-2, D-336-2Т* • Nominal Power(MCA, H=0), kW6300 • Frequency of rotor rotation of ​​power turbine, min-1 8200** • Fuel - gaseous *** (naturaloroil gas) • Effective Efficiency, % not less then 31 • Overall dimensions, mm3932,5x1068,0x1227,4 • Weight, kg 1470 * Maintaining the power up to t = +25 °С.** If necessary, modifications may be made for GTEwith rotational frequencies 5000 or 3000 rev/min, and besidesD-336-1 –left rotation, D-336-2, D-336-2Т – right rotation.*** Upon customer request, the engines can be converted to run on liquid fuel – kerosene of RT, TS-1 or similar fuels of foreign production.

  9. GAS TURBINE ENGINE D-336 MAIN FEATURES • High fuel efficiency at constant price increases for natural gas • Solution of problems of reducingCO andNOx in combustion products • Minimal investment in new construction, reconstruction and modernization • High reliability and dependability (total operating time - 2 500 000 hours) • Low cost of maintenance • High level of maintainability without dismantling with the possibility of a modular repair • High degree of automation • Warranty and maintenance service for the entire period of operation

  10. TECHNOLOGY OF COMBUSTION OF GAS FUEL IN NEW TYPES OF BURNERS

  11. High efficiencyHigh reliabilityHigh effectivenessin all modes of 10-110% Reduced temperature modeUnified, simple,technological EFFECTIVENESS OF A NEW GENERATION OF GAS BURNER Low emission: NOx- no more than 25ppm СО- no more than 8 ppm

  12. Testing results for modernized combustion chamber of turbine type GTK-10-4 (power 10 MW) 12

  13. USING MODERNIZED COMBUSTION CHAMBERIS THE BASE TO EXTEND MOTOR RESOURCE AK REGENERATOR CC HPT LPT Diagram of the temperature distribution 1- specifications data(passport); 2 – Real data of measurement AK- axial-compressor compressor,CC – chamber of combustion, HPT – high pressure turbine,LPT – Low pressure turbine 13

  14. RESULTS OF MODERNIZATION • Natural gas savings 10-15% • Reduction of pollution: • NОxnot more than 10÷50 мg/м3 (25 ppm); • CO not more than 5÷10 мg/м3 (8 ppm) • Increasing project value of turbine up to 30% • Wide range of turbine power regulation with high gas savings and low NOx and CO from 10 to 120% • Fast recoupment of investment 10-24 months • High level of uniformity of temperature field in gas combustion zone and vibration decrease prolong service life of turbine (primarily a catalyst). • Opportunity to fulfill short term tasks (from 1 to 30 days)reduces losses from downtime. • No necessity in purchasing new turbines and accessory equipment.

  15. Process of gas combustion in turbine Before modernization New Generation Burner Thank you for Your attention! CНЕMTRADE ESTONIA OÜ Madara 31-21, Tallinn, 10613, Estonia Tel: +372660-10-50, fax: +372 660-10-50 E-mail: nikulin74@gmail.comwww.chemtrade.ee CONSORTIUM FOR CONSTRUCTION AND RECONSTRUCTION OF HYDROELECTRIC POWER STATIONS 105 Swetland Lane 2-nd floor, West Wyoming, PA 18644, USA Tel:+1 570301-90-67, fax:+1 570300-18-41 e -mail:: consnikre @ gmail.com

More Related