1 / 23

Goodson Tools and Supplies for Engine Builders

Goodson Tools and Supplies for Engine Builders. Keeper-Eeze Tools. Keeper- Eeze Tools. KE-6802. KE-6940. KE-6902. KE-6901. KE-6804. KE-6903. Keeper-Eeze Demonstrated on Honda CRF-250R.

basil-nash
Download Presentation

Goodson Tools and Supplies for Engine Builders

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. GoodsonTools and Supplies for Engine Builders Keeper-Eeze Tools

  2. Keeper- Eeze Tools KE-6802 KE-6940 KE-6902 KE-6901 KE-6804 KE-6903 Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  3. Keeper-Eeze Demonstrated on Honda CRF-250R Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  4. Valve Support Selection: A Shot-Bag or Chamber Plug must be used to hold up the valves while removing the valve locks. • The Shot-Bags will conform to the combustion chamber. They should not protrude too far from the deck surface when installed. Choose from the different size bags for the correct fit. Multiple bags can be used for large chambers. Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  5. Sleeve Selection • Determine the correct protective guide Sleeve. Pick the Sleeve that fits closest to the bucket bore dia. And the spring/ retainer assembly. Some engines require the valve spring clearance relief to be used as a guide. ID always fits tool Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  6. Installing Sleeve • Fits in around spring & retainer • Install the correct size sleeve over the spring & retainer assembly. The sleeve will maintain the proper fit for removal and assembly of the spring & retainer. Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  7. This shows the proper sleeve installed around the spring and retainer. Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  8. T-Handle Assembly • Hold the T-handle portion of the Keeper-Eeze tool with the tube down between the fingers. Remove any Loader Modules from the tool by gently pulling on the plunger at the end to overcome the magnetic force. Retract the Adjuster by loosening the knob on the side and pulling it back. Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  9. Insert the Remover attachment (Order No. KE-6803) into the end of the Keeper-Eeze tool. Push it in with a twisting action until it is fully seated. Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  10. Push tool down • Insert “T” Handle in sleeve installed in step 3. Hold tool down with one hand and firmly strike the T-Handle with palm of the opposite hand. This will release keepers. (Do not strike Keeper-Eeze with a hammer) Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  11. Lock and retainer held by remover • Pull the tool away from the cylinder head. The valve locks and retainer will be held safe by the Remover. Store the components for later assembly. Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  12. Remove Spring • Remove valve lock & Retainer off of the magnet with your hand Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  13. Remove valve Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  14. To Reassemble • Install retainer on top of valve spring • Install valve spring Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  15. Install Sleeve • Spring Assembly in place Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  16. Now the installation attachment is ready to have the correct keeper loader installed into the end of the installation attachment • Insert the installation attachment into the T-handle Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  17. Assembly • Insert the correct size loader module with the correct loader that matches the valve stem diameter until it seats up against the magnet Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  18. Fully Assembled • Loosen adjustment knob on side of T-handle. Then adjust loader module pin to approximately the same depth the keepers are located down on the valve stem. Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  19. Keepers are in position to be installed in the retainer and valve stem • Place the valve locks (keepers) on the Loader Plunger Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  20. Same as removal, push down on T-handle Until an audible “click” is heard and felt in the handle and snaps in place and then remove T-handle • Now insert into the top of the sleeve and push into the retainer Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  21. Remove outer sleeve and you have a finished product Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  22. Keeper- Eeze Tools KE-6802 KE-6940 KE-6902 KE-6901 KE-6804 KE-6903 Toll Free: 1-800-533-8010 Phone: 507-452-1830: Web site: www.goodson.com

  23. GoodsonTools and Supplies for Engine Builders Keeper-Eeze Tools Any questions on the Keeper- Eeze please contact us Toll Free: 1-800-533-8010 Phone: 507-452-1830 Website: www.goodson.com

More Related