1 / 40

Sistema de Portero Eléctrico Kantech KTES

Sistema de Portero Eléctrico Kantech KTES. David Letendre Traducido por: Héctor Xatruch. Agenda. Principales características Especificación Número de Parte Conexión del Hardware Utilizando la unidad Programando el KTES – Modo independiente Estado de la unidad Reiniciar la unidad

beaulieud
Download Presentation

Sistema de Portero Eléctrico Kantech KTES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Sistema de Portero Eléctrico KantechKTES David Letendre Traducido por: Héctor Xatruch

  2. Agenda • Principales características • Especificación • Número de Parte • Conexión del Hardware • Utilizando la unidad • Programando el KTES – Modo independiente • Estado de la unidad • Reiniciar la unidad • Conexión con EntraPass • Conexíón con control de acceso (Integración Wiegand)

  3. Kantech KTES • Sistema de Portero Eléctrico para: • Edificios de apartamento • Comunicdades cerradas • Condominios • Edificios de oficina • Fábricas • Sitios industriales Diseño y apariencia de calidad Robusto y anti-vandalico

  4. Principales Características • Modo independiente o integrado con sistema de control de acceso • Conveniente programación remota y administración con el software EntraPass • Facilmente programable, directamente desde el teclado • Directorio electrónico con capacidad para 3,000 inquilinos • Soporte a lectores para caracteristicas de control de acceso • Seleccion de idioma dinamina para el visitante • Anti-vandalico, 4-lineas, 20-caracteres LCD con retroamimentación de alto contraste • Caja de acero inoxidable resistente a la intemperie y anti-vandalica • Botones de función contextual para una sencilla operación del sistema • Número de telefono alternado disponible para llamar al inquilino • Capacidad de reportes de alarmas y problemas versatil • Cifrado de 128-bit en la placa, comunicación IP segura con EntraPass • Opcional, cubierta con cámara de video a color para mayor seguridad • Bateria de respaldo supervisada garantiza una operación continua por un mínimo de 4h. • Una sola línea telefonica soporta hasta 5 unidades

  5. KTES – Por dentro – por fuera

  6. Especificaciones Físicas • Dimensiones para colocar en superficie (Alura x Ancho x Profundidad) 29.21 x 37.46 x 9.91 cm (11.5 x 14.75 x 3.90 pulg) • Peso 7 kg (15.4 lb) • Montaje Superficie, flush, o cuello de ganso • Construcción Calibre 14 de acero inoxidable montado en caja de calibre 16. Pintura resistente a la intemperie “Epoxy” negraBocina con material de fibra a prueba de agua Microfono omni direccional de alta calidad en una cámara acustica Condiciones de Operación • Temperatura 0° a 49°C (32° a 120° F) -35° a 49°C (-31° a 120° F)*Con kit de calor opcional • Humedad 0 a 95% no condensado

  7. ¿Superficie o Flush?

  8. Superficie o Flush

  9. Especificación Operacional • Capacidad: Hastap 3,000 inquilinos; 4,000 eventos en modo autonomo; 1- a 5-digitos para ID del inquilino; 4- a 6-digitos para PIN del inquilino; 2 números telefónicos por inquilino (hasta 24 digitos) 1 Lector • Pantalla: A prueba de vandalismo 4-líneas x 20-caractereres LCD Alto contraste y luz de fondo Mensajes de bienvenida personalizables 2 Mensajes por idioma (hasta 4) Tiempo de despliegue variable (0-255 segs) • Programación: Directamente desde el teclado Remotamente con el software EntraPass

  10. Especificación Operacional • Tiempo de llamada: 10 segundos a 1 hora con advertencia de tiempo restante • Línea Telefónica: Tono de pulso o rotativo (hasta 5 unidades en la misma línea) TIP y Ring son reversibles (Valor REN es 0.1) • Puerto Wiegand: Interfaz de Control de Acceso Wiegand Led de Lector para validar el estado de la salida de la cerradura • Entradas Supervisadas: 4; sencilla, doble y/o sin FDL Cableado máximo: 600 m (2,000 pies) utilizando #22 AWG • Puertos de Comunicación: Ethernet 10/100Base-T con RJ-45 (Hasta 100Mbps) RS-485 (Hasta 115,200 baud, detección automatica) Línea telefónica (hasta 2,400 baudios por modem)

  11. Especificación Eléctrica • Energía de Entrada • Norte América 16 VAC, 40 VA • Internacional 19 VDC (100 VAC ~ 240 VAC, 50~60 Hz), 3.15 A • Salida Auxiliar DC 12 VDC, 450 mA • Salida de Cerradura 12 VDC, 650 mA • 3 Relé en la placa Forma C 30 VDC / 24 VAC ; 3 Amps c/u • Salida del Lector 5 VDC or 12 VDC (175 mA) o energía supervisada externa (max 1A) Configurada con JP9

  12. Número de Parte - Accesorios • KTES-FBOXCaja KTES flush para instalación flush con anillo de compensación, negro • KTES-HEAT Almohadilla calentador KTES para instalaciones bajo -0°C (32°F) • KTES-CAM-NKTES kit con cubierta de cámara a color con soporte (NTSC) • KTES-CAM-PKTES kit con cubierta de cámara a color con soporte (PAL) • KTES-INDEX-FKTES Directorio de papel indexado iluminado con LED • KTES-INDEX-RKTES anillo recorte de papel indexado para ser utilizado con una instalación “flush” de KTES-INDEX-F • KTES-POSTALKTES soporte de cerradura con interruptor • KTES-MPLATEKTES plato de montaje para instalación con cuello de ganso • E-KTES-3000Certificado para aumentar 1 KTES hasta 3,000 inquilinos

  13. Número de Parte – Repuestos • KT-TAMPER Interruptor anti-sabotaje para gabinete • KTES-LOCK Cerradura para armario con 2 llaves • KTES-SPEAK Ensamblaje para bocina • KTES-LCD Ensamblaje para módulo LCD • KTES-MPCA Ensamblaje principal para PCB • KTES-DCPA Door PCB assembly with keypad and microphone • KTES-LENS LCD clear lens

  14. Part Number – No Phone Bill (N.A. only) • KTES-5048MC Main controller for up to 48 lines • KTES-5000MCMain controller for up to 1152 lines Requires auxiliary relay cabinet (KTES-5000AC) • KTES-5000ACAuxiliary relay cabinet for up to 96 lines (8 relay boards) To be use with KTES-5000MC main controller • KTES-RBRelay board (12 tenants per board) • KTES-IC Cable for relay board(12 tenants per board) Each Main controller require a KTES-RB12 relay board per 12 lines and a 16VAC 40VA transformer.

  15. Reader IN / Reader OUT • Lock • Relay 1 – 2 – 3 • 4 inputs • 485 Communication • AC/DC power input • AUX 12V output • Tamper • Phone line • IP Communication

  16. Hardware connection – Locking Device • Internal power (12V, 650mA) OR • External power (Using relay to follow lock output)

  17. Hardware connection – Inputs • Input 1 = Door contact • Input 2 = Postal lock • Input 3 = REX • Input 4 = Undefined • None, single or double EOL

  18. Hardware connection – Reader (Optional) • Possible to have an external reader • Set reader voltage with JP9 • Possible to integrate withaccess controller requiring: • LED connection • Keypad programming of Full EntraPass • Jumpers 5-6-7-8 must be set to OUT • Reader types:26bit, 34 bit, KSF and XSF • Display format: HH:DDDDD, HHHH:DDDDD, DDDDDDDD(8 digits), DDDDDDDDDD(10 digits), HH:HHHH, HHHH:HHHH

  19. Hardware connection – Phone line • Connect phone line to TIP & Ring terminal • Up to 5 units on the same line.Connected in parallel on TIP & RING(3 if using dial-up) • Australia and New ZealandConnect ferrite

  20. Hardware connection – Power • Connect Earth ground • Connect main power • Connect the battery Note: The battery must be kept indoor if the outdoor temperature drops below -25°C (-13°F). Important: The KTES will not start on backup battery alone.

  21. Using the unit – Calling a tenant • Select language (if required) • Press the center button until desired language is displayed • Call Tenant: • Type in Tenant ID on keypad • Select tenant from list • Select List (press left button) • Use ↑ (left button) or ↓ (right button) to move cursor (>) to desired tenant • Press Call (center button) • Search tenant • Select Find (press right button) • Press the digit corresponding to the first letter of the desired tenant • Use ↑ or ↓ to move cursor (>) to desired tenant (if required) • Press Call (center button)

  22. Using the unit – Granting or Denying access • Tenant phone ring • No answer within defined number of ring (5), unit display No Answer. • If alternate phone number exist for tenant, unit dial it. • No answer within number of ring, unit display No Answer. • Tenant answer the phone • Countdown timer for talk time appear on right • A beep will be heard at the warning time • System hang up at the end of the countdown • Tenant press an action key on his phone • 9 to grant access (customizable key). Unit display Access Allowed and unlock door. • * to deny access (customizable key). Unit display Access Denied. • Defined key for auxiliary relay. Unit display Alternate Access and activate relay. Calling Tenant name 00:40 Vol- Cancel Vol+

  23. Using the unit – Tenant access • Accessing the building with a PIN • Press the * key • Enter Tenant PIN • Unit display Access Granted and unlock door • Accessing the building using a card (require a reader) • Present Tenant card to reader • Unit display Access Granted and unlock door

  24. Programming the KTES – Accessing it • Access the VUI (Visual User Interface) • Hold the * key for 5 seconds (the unit will beep after 5 seconds) • Enter the default Installer PIN 8888 The star key * can also be used as the Exit or Escape key. The pound key # is the Enter key. Note: For security purposes, you should change your PIN to a different value as soon as possible.

  25. Programming the KTES – Entering text BkSp Caps Next The system support capital as well as lower cases letters. The panel middle key allows you to choose your preference: • Caps: First letter after a space is capitalized (default). • CAPS: All capital letters • caps: All letters will be lower case.

  26. Programming the KTES – Entering text • Enter text as you will do when sending text message on mobile phone (Pressing 2 will show A, pressing it again will show B, etc.). See table below for characters list.

  27. Programming the KTES – Stand alone • For any installation not using AC - 60 Hz to power the unit, set Time Base to Xtal. (8-1-1-2-2) • For any installation outside North America,Set Tel interface (8-1-1-3) code from the following list:

  28. Programming the KTES – Stand alone • Set Daylight Saving time if required (8-1-1-5, 8-1-1-6) • Set time (3-1) and date (3-2) • Set Welcome messages (2) • Set Language (8-1-2-1) M=Main, E=Enable, D=Disable • Change Installer code and add tenant (1) • Call a tenant and validate functionality and audio Adjust audio if necessary using Live adjustment (8-1-2-2-5) • Customize to specific need.

  29. Status of the unit – LED Status • TXRX (YELLOW) LED is OFF when there is no Ethernet network/cable unplugFLASHING when there is network activity; and ON when the network is present • 100 (GREEN) LED is ON only when the KTES is connected at 100 Mb/s.

  30. Status of the unit • Look for message on display • Check event log • TamperSwitch • PowerFail • BatteryTrouble • BufferFull70 Only when link with EntraPass Stand alone = FIFO (4096 events) • OtherTrouble • READER_POWER_FAILURE • LOCK_POWER_FAILURE • AUX_POWER_FAILURE • PHONE_LINE_TROUBLE A=Alarm R=Restore • ForcedOpen • OpenToLong • LeftOpen • LockTrouble • KeyPadLockout • DuressAlarm *A only • AccessGranted • Access Denied = Invalid Access Schedule • VisitorAllowed • AltVisitorAllowed • VisitorDenied • UserTrace, • InvalidStatus • OtherAccessDenied= Denied by external controller

  31. Reset the unit

  32. Connection with EntraPass

  33. EntraPass KTES Edition • Free with each KTES • Same CD • Different install code • Possible to Upgrade to full Special Edition with EntrePass SE code. • Possible to Migrate to EntraPass Corporate or Global

  34. EntraPass KTES Edition • New Wizard • New IconunderDevice • New IconunderUsers

  35. Connection with EntraPass • Connection under Special or CE Gateway • Latest EntraPass version required4.02.21 • Wizard available on all version via Devices - KTES

  36. Connection with EntraPass – Dial up • Do not use the box CODE TO ACCESS AN OUSIDE LINE • Maximum speed is 2400 • Only 1 unit per site • Multiple unit (site) can be connected on the same phone line (up to 3)

  37. Connection with EntraPass – IP • Fix IP only (no DHCP and DNS) for KTES • KTES Serial Number will be populated once IP connection is made • SE or Gateway requires a fix IP • If SE or Gateway IP change, it is possible to change it from the KTES (6-3-3-1), no need to hard Reset • Only 1 unit per site • Multiple unit (site) can be connected on the same phone line (up to 5)

  38. Connection with EntraPass • Define unit and site in EntraPass • Establish connection with EntraPass • From the unit, call a tenant and validate functionality and audio Adjust audio if necessary using Live adjustment (8-1-2-2-5)Audio and contrast can only be adjusted from unit. • Customize to specific need. • Print tenant list from Device – KTES windows

  39. Connection with access controller (Wiegand integration) • Available in Stand Alone or FULL EntraPass onlyNot available on EntraPass KTES Edition • KTES unit becomes a slave • REX stop working • Relay activation on access event stop working • Unit send Wiegand string to controller • Adjust messages on screen according to LED signalSignal must be set to GND for at least 1 second. We can short LED to GND on reader port 2 to have the unit always display Access Granted.

  40. Thank You!

More Related