1 / 27

Sustainable Hotel Design

Sustainable Hotel Design. Group 5 Presentation 4 Demand/Supply Matching. Where We Are Now. North. 1 st level. Site C Building Design. Ground level. Reducing Lighting demand. Lighting Most important factor for safety and comfort. Low lighting Requirement Rooms -50 lux

benjamin
Download Presentation

Sustainable Hotel Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Sustainable Hotel Design Group 5 Presentation 4 Demand/Supply Matching

  2. Where We Are Now North 1st level • Site C • Building Design Ground level

  3. Reducing Lighting demand Lighting • Most important factor for safety and comfort Low lighting Requirement • Rooms -50 lux • Halls/stairs - 150 lux • Restaurant- 150 lux High lighting Requirement • Swimming pool - 300lux • Gym - 500 lux • Kitchen- 500 lux • Office - 500 lux

  4. Artificial lighting Minimise demand by using energy efficient lamps • Replace smaller fittings with Compact fluorescent 20w • Replace larger fittings with tubular fluorescent 60w • Compare against tungsten 100w filament • Energy Reduction = 80%(from efficacy) Energy used to light building for 20 hours of the day. Lumen method used to gain amount of luminaires, savings: Bedroom 0.5MWh, Restaurant 17.8MWh, Kitchen 35MWh,

  5. Natural Day-lighting • Building design optimised for natural daylight • Daylight factor calculated using protractor • Diffuse sky approx 5000lx (200lx available) 20% 10% 5% 4%

  6. Control Lighting Control for bedrooms, (occupants) • Dimmer switch. • Internal removable shading. • Key card system. Control for restaurant, office (control systems) • Stepped PSALI and switch off zones • Would require light sensors • Master switch/timers

  7. Natural ventilation and Heat Recovery Natural ventilation • As previous design Heat Recovery • 60% efficient • All air passes heat exchanger. • Need to be easily cleanable for kitchen

  8. Mechanical Ventilation • Mechanical Ventilation • Using two Aerofoil bladed centrifugal pump (η 85%) • For outside 0 and inside 30 • Swimming pool load for fans= 1kW7290m3/s • Saving using heat recovery on heating load =35kW • Kitchen load for fans=2kW11520m3/s • Required to remove contaminants from kitchen.

  9. Fan Power

  10. Previous Simulation Previously: • Base Case • 1 zone L-shape model Used to determine: • Form • Orientation • Construction • Glazing Area BASE CASE L-SHAPE

  11. Zoned Model Zoned model determines: • More accurate demand information • Demand profiling • Zonal environmental strategies Bedroom Floor area: 32m² Ventilation :1 ac/h Operations • Lighting: 50W • Occupancy: 22:00 – 07:00 Design temperature • 19-21°C (CIBSE Guide B1)

  12. Tweaking the Design Glazing Area: 30% • Minimise overheating in summer • Reduce heat loss in winter Ventilation rate • Summer: 3 ac/h 10:00 – 18:00 1 ac/h 18:00 – 10:00 (following day) • Winter / Transition: 1 ac/h 00:00 - 24:00 Construction • Varied load bearing block work to timber construction

  13. Timber Wall Construction U-value 0.20W/m²K Decrement Delay 12.4 hr Sound absorption >52db Advantages • Cost competitive • Fewer layers allows slimmer construction • Vapour permeable without membranes – no interstitial condensation • Matches thermal and acoustic properties of heavyweight builidings • Materials are non-toxic and low embodied energy

  14. Timber Roof Construction U-value 1.7 W/m²K (with 200mm pavatherm) Decrement delay 11.5 hr Sound absorption > 47db Advantages • Reduces overheating and external noise • Vapour permeable without membranes prevents interstitial condensation • Materials are non toxic with low embodied energy

  15. Bedroom Seasonal Performance • Typical summer day (free floating) 3ac/h (07:00-22:00), 1ac/h (22:00-07:00) • Typical spring day Heating requirement 3.73 kWh • Typical winter day Heating requirement 22.29 kWh

  16. Bedroom Demand Profile Sensible heating load Winter (typical) • Varies between 0.3-0.5 kW Transition (typical) • Peak 04:00-08:00 about 0.25 kW • Off 14:00-20:00 Summer (typical) • Most days require no heating • Some days require boost 0.03kW from 04:00-8:00

  17. Electrical Demand

  18. Thermal Demand

  19. Final Demand Analysis • Our hotel consumes: • 56% less energy than typical practice • 33% less energy than best practice

  20. Demand /Supply Matching - HOMER • Manipulation to model • CHP system • Biogas Generator • Heat recovered from generator – imitate GSHP + Heat recovery • Boiler – imitate thermal supply from CHP • Resources • Wind – ESP-r database • Stream Flow – 40 l/s • Biomass – Constant Supply • Load Profiles • Thermal – ESP-r • Electrical – Good Energy

  21. Initial Findings - Power 84% CHP 16% Wind 19% excess power Transition Winter Summer

  22. Initial Findings - Thermal 69% CHP 31% GSHP 8% excess heat Transition Winter Summer

  23. Alterations to Model • Addition of Battery • 152 kWh • 304 kWh • 408 kWh • Subtraction of Hydro Power

  24. Power - Matching 80% CHP 20% Wind 0% excess power Transition Winter Summer

  25. Thermal - Matching 84% CHP 16% GSHP 3% excess heat Transition Winter Summer

  26. Conclusions • Final Supply Systems • Biomass CHP • Wind Energy • Ground Source Heat Pumps • Do without Hydro Power • Use of Batteries

  27. Thank You For Listening Any Questions ?

More Related