How Do I Choose The Right Grinding Discs?

1. CHOOSINGTHE RIGHTGRINDING DISCSFORYOUR APPLICATION!

2. The grinding disc is a widely used cutting tool that is provided by almost all the metal cutting tools manufacturer. It's basically an abrasive cutting tool and in a grinding disc, the abrasive play out same function as the teeth in a saw. In any case, in contrast to a saw, which has teeth just on its edge, the grinding disc has abrasive grains disseminated all through the disc. A huge number of these hard, extreme grains move against the work-piece to remove little chips of material.

3. Abrasive cutting tool manufacturers offer a wide number of items for a wide number of grinding applications in metalworking. Picking the wrong item can result in the waste of time and cash. So, keep reading to choose the right grinding discs for your application. Finding the grinding disc or cutting wheel you require relies upon the materials you'll be working with: metal, stone, concrete, or any other.

4. Aluminum oxide: Grinding discs made of aluminum oxide are the most widely utilized while working with metals. There are likewise abrasives made of zirconia alumina, a mix of aluminum oxide and zirconium oxide. Zirconia alumina is a rock-solid substance that doesn't chip, so you don't need to change the disc as frequently. This abrasive may cost more than others; however, the life span will be much longer. Aluminum oxide grinding wheels can also be utilized on ferrous metals, nonferrous metals, iron and steel. Zirconia alumina will chip away at steel, iron, and bronze. While using grinding discs, you also need to make sure that the grinding disc must be free of contaminant. Any contaminant will rust before you ground it, so you need to begin with another wheel, or granulate just hardened steel utilizing the wheel. Never blend wheel use when you are working with the stainless steel. ALUMINUMOXIDE

5. Silicon-carbide: Silicon-carbide based grinding discs are utilized for cutting / grinding chilled and gray cement, iron, stone as well as other non-ferrous materials (copper, soft bronze, brass, magnesium, aluminum) and nonmetallic (gemstones, ceramics, and ribbers), since they are more diligently and more fragile than aluminum-oxide wheels. Nonetheless, despite the fact that silicon-carbide abrasives are sharp, they separate rapidly and subsequently, they are not effective with regards to heavy grinding. They work best under lightweight and are an amazing choice for putting on a smooth and perfect finish. SILICON-CARBIDE

6. Natural diamonds: They can be utilized for grinding hard materials (like rock, stone, solidified carbides, marble), however, they have totally been taken out of the market by synthetic diamond discs, because of the ease of use and affordable cost of the latter. Synthetic diamonds utilized for grinding aluminum oxide cutting tools, hard steels and solidified carbide. NATURALDIAMONDS

7. Cubic boron nitride: It is a sharp, cool as well as incredibly hard abrasive (2.5x harder than aluminum oxide and nearly as hard as diamond). It is utilized for grinding super-hard, fast steels, solidified cast irons, die and stainless steels. Metal-covered abrasives are utilized for universally useful grinding, and uncoated abrasives are utilized in vitrified bond and electroplated metal systems. Depending upon your use and the item to be worked on, you have to choose the grinding discs wisely from a good abrasive cutting tool manufacturers. CUBICBORONNITRIDE

8. BIPICO, an ISO 9001:2008 company is established in November – 1974 And is proud of its more than four decades journey as a manufacturer of Hacksaw Blade to Bimetal Bandsaw Blade BIPICO has grown into a major cutting tools manufacturer and exporter with a strong brand image in India and in International markets. OURHISTORY How We Came About

9. CONTACTDETAILS MAILING ADDRESS Nadarkha, Post Box No. 36, Chikhli Road, Bilimora – 396 321 Dist. Navsari, Gujarat, ( INDIA ) EMAIL ADDRESS info@bipicoexp.com PHONE NUMBER + 91- 2634- 284629 / 284630 / 283695