1 / 7

Brahmatej Meka Raymond Songer Jeff Marcelus

Team 3 Go Kart for Shane. Brahmatej Meka Raymond Songer Jeff Marcelus. Shane Davis 6 sunrise drive, Columbia CT (954)-850-5448 . Mount Actuators. The actuators from Firgelli Automations came in Wednesday February 1. They will be mounted on the underside of the driving console.

blaise
Download Presentation

Brahmatej Meka Raymond Songer Jeff Marcelus

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Team 3 Go Kart for Shane BrahmatejMekaRaymond SongerJeff Marcelus Shane Davis 6 sunrise drive, Columbia CT (954)-850-5448

  2. Mount Actuators • The actuators from Firgelli Automations came in Wednesday February 1. • They will be mounted on the underside of the driving console.

  3. Mount Seat • The seat will be permanently mounted now that our client has come to sit in the go kart. • This will be done by implementing cross members along the frame so that the seat has something to bolt on to. • The pre-threaded holes on the underside of the seat will be used.

  4. Steering • As stated before the steering will be controlled by our Dayton gear motor. • Jeff has taken the appropriate measurements so that the motor can be integrated into the steering column seamlessly. • This will be accomplished by mounting the motor at the same angle as the steering column and connecting it via a chain drive

  5. Joystick and Microcontroller • Both the joystick and microcontroller have been ordered. • Joystick will be implemented into the side console of the seat. • A console will be mounted on the left arm of the chair to mimic our clients left hand drive wheel chair. • The arm will be able to flip up out of the way

  6. Microcontroller • The microcontroller that was ordered is a Arduino Uno Board Rev3 • It will allow us to run all of the necessary electronic parts that we have • Brahm has been working diligently on learning, programming and testing the c-code for our microcontroller

  7. Future Work • Raymond: mounting the seat Hours worked: 17 • Jeff: actuator mounting Hours worked:25 • Brahm: microcontroller implementation Hours worked: 15

More Related