1 / 19

EI Data and Calculations

EI Data and Calculations. Angelique Luedeker and Melinda Ronca-Battista, ITEP/TAMS Center. Quantifying Emissions. Examples. How Are Emissions Estimated?. Continuous Emissions Monitoring Systems (CEMS) Or Source Testing EPA Emission Estimation Models TANKS LANDGEM WATER9 MOVES NONROAD

bliss
Download Presentation

EI Data and Calculations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EI Data and Calculations Angelique Luedeker and Melinda Ronca-Battista, ITEP/TAMS Center

  2. Quantifying Emissions Examples

  3. How Are Emissions Estimated? Continuous Emissions Monitoring Systems (CEMS) Or Source Testing EPA Emission Estimation Models TANKS LANDGEM WATER9 MOVES NONROAD Material Balance Emission Factors

  4. Quantifying Emissions • Emission Factor • Conversion factor provided by EPA (AP-42) or other source to quantify emissions • E.g., lbs mercury emitted per ton of coal burned • Activity • Collected by the person that estimates the emissions • Process data (tons of coal burned, hours of operation) • Emission Factor and Activity used to estimate Emission rate for a single pollutant • E.g., 10 pounds/year mercury from small power plant

  5. Quantifying (cont.) E Basic estimating equation E = EF x A = EF x activity (throughput) • Where • E = Emissions rate (TEISS calculates) • EF = Emission factor (TEISS provides) • A = Activity (aka throughput, thatyou collect and enter into TEISS calculators)

  6. Where do I get the necessary data to calculate emissions? LOTS of info on the internet • Process activity • Directly from source • From permits • Monitoring/CEMs • Questionnaires/Surveys

  7. For each type of source: • Coming up, Data Collection slides and TEISS Data Entry slides for each source type • Data Collection slides • Information you collect in real world terms • TEISS Data Entry slides • TEISS has a structure based on the NEI • Slides explain how data you collect fits into the structure

  8. Point Source Data Collection • Physical Location (address, lat/long) • Stack parameters • Height • Diameter • Flowrate • Exit gas temperature

  9. Point Source Data Collection (cont.) • Process-level information, leads to SCC selection • Flow diagram • Materials being consumed (type and amount) • Boiler throughput • Operating schedules • Control devices/efficiencies

  10. Point Source TEISS Data Entry • Facility Data • Site Name • Physical Location (address, lat/long) • Release Points • Emission Units • Processes • Control Equipment? • Period (time frame-usually annual) • Emissions (you can enter or calculate with TEISS)

  11. Nonpoint Source Data Collection • Process information • Leads to SCC selection • Types of operations • Gasoline storage tank refilling • Unpaved roads • “Activity data” needed to calculate emissions • Type of refilling process (splash or submerged) • VMT, vehicle weight, speed, road silt content, etc. • Pollution-management practices or control measures • Dust abatement with water or petro-based chemical

  12. Nonpoint Source TEISS Data Entry • Location • If enter data for on-reservation sources, your reservation • If import county-level data from NEI database, a county • Process--leads to SCC selection • Control Equipment/Measures • Period (usually annual) • Emissions (you can enter or calculate with TEISS)

  13. Mobile Source Data Collection • On-Road • Road types • Vehicle types & use • Vehicle Miles Travelled (VMT) • Off-Road • Engine types • Horsepower • Hours of use • Model used to estimate emissions

  14. Mobile Source TEISS Data Entry • Location • If enter data for on-reservation sources, your reservation • If import county-level data from NEI database, a county • Processes • Period • Emissions (you enter from your estimates based on road lengths/types or from EPA model calculations)

  15. Fire Data Collection • Special Case: covers large area, like nonpoint sources, but in defined location like point sources • Data elements include • Datesof fire • Latitude/Longitude coordinates • Fire type (man-made or natural) • Acres burned • New EPA format and TEISS treat fires as EVENTS

  16. Fire TEISS Data Entry Event Identification Period (dates) Location If enter data for on-reservation fires, your reservation If import county-level data from NEI database, a county Geographic Coordinates Processes (prescribed burn or wildfire) Emissions (from EPA or calculated with TEISS)

  17. Homework due in 5 days: 1. List the nonpoint sources on the reservation that you plan to include in your EI 2. Review the Nonpoint section of the ITEP example Tribal EI QAPP. Use TEISS calculators to write out estimation methods and data you need to collect for the nonpoint sources, and list these in the Nonpoint table in QAPP template

  18. Homework due in 5 days: 3. Complete the Nonpoint section of your QAPP and email it to instructors (Image taken from PetsForPatriots.org)

More Related