Five Simple Tips to Ensure Fire Door Compliance

1. 5 Simple Tips to Ensure Fire Door Compliance

2. Pay Attention to Your Doors Simply by paying attention to the operation of the fire doors Irelandwhile moving through your facility on a regular basis, you can catch damaged or compromised door assemblies before they become larger problems. If a door is not latching properly, make sure to take note and get it repaired as soon as possible. NFPA 80 requires that any repairs and defects that could interfere with operation be repaired without delay.

3. Operate Open Doors Regularly Some fire doors are designed to remain in the open position until the self-closing device is activated. NFPA 80 recommends that these doors are operated at fixed intervals to ensure that they properly operate. Self-closing devices could unintentionally become stuck or non-operational over time. Testing these doors on a regular basis ensures they will close properly in the case of a fire.

4. Use Caution When Painting Doors Make sure not to paint over fusible links or other heat-actuated or release devices, which could prohibit the activation of self-closing devices. Also prevent any paint from accumulating on any moveable parts as it could prevent fire doors Ireland from moving and latching in the closed position. NFPA 80 mandates that a label indicating the fire rating of the frame be permanently affixed to the door or frame. Painting over this label can be costly.

5. Ensure Documentation is Current NFPA 80 requires thorough documentation of any inspections and repairs made to your fire doors. Make sure that any repairs or modifications made are documented properly. This will not only suffice for AHJ approval, but will also help you to stay organized and aware of the condition of your fire doors.

6. Do Not Make Modifications Before Checking With a Professional Often, doors and frames have additional hardware that prohibits the door from functioning properly. Before making any modifications to fire doors or the door assembly, contact the manufacturer or testing laboratory whose label is affixed to the door. Many field modifications such as kick plates, door stoppers, etc. will prohibit the door from functioning as designed and is therefore not compliant. The door manufacturer and/or testing laboratory will be able to guide you in making proper modifications.

7. Thank You For any help, visit https://bmfire.ie/get-quote/