1 / 24

Manual de utilizare pentru

Manual de utilizare pentru. Ledul AC: ON = tensiune prezenta OFF = lipsa tensiune alimentare. Ledul STATUS :. Verde: ON = toate zonele sunt inchise OFF = Zona(e) deschise Flash = Timp de intarziere. Rosu: ON = Sistem(e) armate OFF = Sistem(e) dezarmate Flash = Alarma.

bobby
Download Presentation

Manual de utilizare pentru

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Manual de utilizare pentru

  2. Ledul AC: ON = tensiune prezenta OFF = lipsa tensiune alimentare Ledul STATUS : Verde: ON = toate zonele sunt inchise OFF = Zona(e) deschise Flash = Timp de intarziere Rosu: ON = Sistem(e) armate OFF = Sistem(e) dezarmate Flash = Alarma Tastatura LCD si Tastatura LCD pentru acces control DGP2-641 and DGP2-641AC

  3. Ecranul LCD va va ghida cu mesaje explicite Foloseste sagetile pentru navigare si selectie [CLEAR] = Sterge data curenta sau revine la pasul anterior [ENTER] = Salveaza data curenta si iese din pasul curent LCD Keypad and Access Control LCD Keypad DGP2-641 and DGP2-641AC

  4. Tasteaza [CUDUL DE ACCES]. • Apasa butonul [ARM]. Armeaza aria daca toate zonele sunt inchise. • Daca aveti acces la mai multe arii selectti aria dorita sau apasati [0] petru toate ariile. • In cazul cand sunt mai multe arii programate Armare regulata Armarea regulat armeaza toate zonele din aria selectata(e)

  5. Tasteaza [CODUL DE ACCES]. • Tasteaza butonul [FORCE] . Armeaza intreaga arie fara a mai astepta sa se inchida zonele declarate force. • Daca aveti acces la mai multe arii, selecteaza aria dorita , sau apasti tasta [0] pentru toate ariile. Armarea fortata- “Force Arming” Armarea fortata permite armare sistemului cu zone deschise. Zonele se programeaza in prealabil

  6. Tastati [CODUL DE ACCES]. • Tastati butonul [STAY] . Armeaza doar zonele nedeclarate “stay”, • Daca aveti acces la mai multe arii, selecteaza aria dorita, sau apasa tasta [0] pentru toate ariile. Armarea partiala –”Stay Arming” “Stay arming” va arma partial sistemul, - doar zonele nedeclarate “stay” (progrmarea se face in prealabil de programator la cerere)

  7. Tastati [CODUL DE ACCES]. • Tastati butonul [5]. Arie armata “stay”, dar alarma se va declansa daca sunt zone deschise (chiar daca sunt definite intarziat) • Daca aveti acces la mai multe arii, alegeti aria dorita, sau apasati [0] pentru toate ariile. Armarea Instant Cu armarea instant,toate zonele vor genera alarma imediat ce se armeaza sistemul(chiar si zonele definite intarziat)

  8. Enter your [ACCES CODE]. To disarm from within the perimeter: • Enter your [ACCES CODE]. • Press the [DISARM] button. Disarming To disarm when entering: • Select the desired area(s). • Select the desired area(s).

  9. Enter your [ACCES CODE]. • Press the [BYP] button. • Use the [] and [] buttons to scroll through the zones. • Press [ENTER] to save and exit. Bypass Programming When a zone is bypassed, it will be ignored the next time your system is armed. • Press the [BYP] button once the desired zone appears on the screen. • Repeat steps 3 and 4 until all desired zones selected.

  10. Tasteaza [CODUL DE ACCES]. • Tasteza butonul [9] . SAU Foloseste butoanele[] si []pentru a selecta zona(ele) si apasa butonul [ACC] pentru a activa sau dezactiva functia “chime”. • Tasteaza butonul [ENTER] pentru a salva. • Tasteaza [CLEAR] pentru a iesi. Programare “Chime” Tastatura poate fi programatasa emita un sunet(beep) rapid si intermitent de fiecare data cand zona programta este deschisa. • Tasteaza butonul [1] pentru a seta zona(ele) chime . • Introdu numarul zonei(din 2 digiti).

  11. Enter your [ACCES CODE]. • Press the [9] button. • Press [CLEAR] to exit. Programming a Chime Zone Schedule Chime zones can also be programmed to chime only when opened between certain hours. • Press the [2] button to set a chime schedule. • Enter a start time according to the 24hr clock (9:00 p.m. = 21:00). • Enter an end time according to the 24hr click (9:00 p.m. = 21:00).

  12. “Alarms in Memory [MEM] to View” will appear when an alarm has occurred. • Press the [MEM] button to view the breached zones. • Press [CLEAR] to exit. Alarm Memory Display

  13. Table 1: One-touch Buttons Button Feature [ENTER] Regular arm [STAY] Stay arm Force arm [FORCE] [BYP] Bypass programming [DISARM] Disarm a Stay/Instant Armed area [5] Instant arm [6] Keypad settings [7] View event record display One-Touch Buttons Press and hold the desired one-touch button to access the following:

  14. Table 2: Panic Buttons Panic Alarm Type Button Combinations Emergency Panic (police) [1] and [3] Auxiliary Panic (medical) [4] and [6] Fire Alarm [7] and [9] Panic Buttons Press and hold one of the button combinations listed below to send a panic alarm.

  15. Enter your [ACCES CODE]. • Press [0]. • Press [ACC]. OR Press [] to scroll the user codes and then press [ACC]. • Press the [] button. Programming User Access Codes – Steps 1 to 6 • Enter the 3-digit User Number to program. • Enter a user code (PIN)

  16. Press the number(s) of the user option(s) you wish to enable/disable. • Press the [] button. Programming User Access Codes – Steps 7 to 9 • Enter the number of the area you wish to assign.

  17. Press the [] button to return to user options; press the [] button to proceed to step 10; press the [ENTER] button to save and exit. Programming User Access Codes – Steps 10 and 11 • Enter 2-digit access level. • Enter 2-digit schedule.

  18. Press the number(s) of the access control option(s) you wish to enable/disable. Programming User Access Codes – Steps 12 to 15 • Press the [] button. • Enter the access control card’s serial number by either using the keypad’s buttons or by presenting the card to the keypad’s reader. • Press [ENTER] to save and exit.

  19. “Trouble(s) [TRBL] to View” will appear when a trouble occurs. To view the trouble display: Press the [TRBL] button. Use the [] and [] buttons. Press the [NUMBER] of the trouble. Trouble Display

  20. Trouble Display – Group [1]: System

  21. Trouble Display - Group [2]: Communicator

  22. Trouble Display - Group [3]: Modules

  23. Trouble Display - Groups [4] to [8]

  24. Thank You

More Related