Download
1 / 7
70 likes | 98 Views
When you are a pro vaper, you must know how to clean the vape tanks and coils. You need to take the coil out carefully and then clean it. However, ensure you donu2019t use any harsh chemical for cleaning tanks and coils as it can damage these. To know more please visit https://csvape.com/tanks.html
E N D
Introduction A clean vape is the simplest way to get optimal performance. Although the ingredients of vape juice will generally not stain your equipment, residue will accumulate, and the build-up will affect the performance of your vape tanks. Vegetable glycerine and some darker e-juice flavorings are notorious for gunking up coils, as are most of the sweeteners used in e-juice manufacturing. A gunked up coil will have lower flavor and vapor production and make vape taste burnt. Even if you change the coil head, the flavoring from the last juice might still be lingering in your device. This is true for tobacco, coffee and more.
The standard rinse If your tank is relatively clean, warm water works well. Take the tank apart, separating the parts. Place each part under running water, drying them with a piece of towel. Let them air dry afterward until no water or condensation is visible. If your tank hasn’t been cleaned for a while, you might have to add an extra step. Take the cup and fill it with water. Place it in the microwave for about two minutes. Rinse the parts of the tank to get the process started. Take it out the cup from the microwave and place the disassembled tank inside of it. Let it sit, until the water cools down, then give your tank one last rinse under the sink. Use a paper towel to gently and carefully dry your tank. Place it aside until completely dry. You can also use a blow dryer to speed up the process, but too much heat can potentially damage your O-rings.
The PG rinse Instead of water, you can soak your tank in propylene glycol. Simply fill up a bowl or cup with your PG, and let your disassembled tank sit there for an hour or two. Don’t use VG, as that would make cleaning your tank more difficult, since it’s a much thicker liquid. Once your vape tank is done soaking in PG, stand it up on a napkin and let it drip dry. This method is excellent for getting out that leftover flavor, as propylene glycol is an excellent flavor carrier.
The cleaning agent rinse If you want even better results, you can use some simple household items to give your tank a deeper cleaning. Take care to rinse them thoroughly after application and let your tank sit to get dry. Baking soda- is a good cleaning agent that can be used to get tanks sparkling again. Ethanol, aka grain alcohol, is yet another highly effective substance for cleaning. Don’t get this confused with Isopropyl alcohol which should not be used on the inside of your tank. Vinegar-is a highly acidic cleaning agent but must be thoroughly rinsed to prevent its smell from lingering. Cheap Vodka- is not a household item, but chances are you can find it at the grocery store. It will do the job and won’t cost you much. Some vapers prefer using a little bit of dish soap or lemon juice with water instead.
How to clean your coils Cleaning coils is a little less straight forward. Replaceable coils in come in two types: coil heads for vape tanks, which are encased in a small metal chamber that contain an absorbent wick; and coils for rebuildable, which require the user to install and wick. The approach to cleaning the two types is vastly different. You must clean rebuildable coils and replaceable coils properly.
