1 / 6

Simulation Problems

Simulation Problems. Jason R. W. Merrick. Problem 1. Implement Exercise 3.1 Use an attribute that specifies which plating processes is to be performed first: front or rear. Use Decide modules to route the entities through the system. Problem 2 a).

bquillen
Download Presentation

Simulation Problems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Simulation Problems Jason R. W. Merrick

  2. Problem 1 • Implement Exercise 3.1 • Use an attribute that specifies which plating processes is to be performed first: front or rear. • Use Decide modules to route the entities through the system

  3. Problem 2 a) • Open Model 03-01.doe in the Arena Book directory • Add a second machine to which all parts go immediately after exiting the first machine • Processing times are the same as the first machine • Examine the effect on the results for 1 week of simulation

  4. Problem 2 b) • After the second machine there is a pass/fail inspection • The inspection take 5 minutes every time • There is an 80% chance of passing • Failed entities must go back through the second machine and be re-inspected • Entities may pass through the process-inspection route as many times as needed. • Examine the effect on the results for 1 week of simulation

  5. Problem 2 c) • Entities can now either pass, fail or be sent for re-work • Assume a 80% passing rate, 9% failure rate and a 11% re-work rate • Failed items must exit the system and be counted • Examine the effect on the results for 1 week of simulation

  6. Problem 2 d) • Entities cannot be re-worked more than once • Ensure that entities that have gone through re-work can either pass (80%) or fail (20%) • Examine the effect on the results for 1 week of simulation

More Related