1 / 9

Do Now:

Do Now:. Hydro Turbines: Power & Efficiency. The Potential Energy of Reservoirs. Dams force water to back up behind them into reservoirs which store the gravitational potential energy of water.

brandon-gray
Download Presentation

Do Now:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Do Now:

  2. Hydro Turbines:Power & Efficiency

  3. The Potential Energy of Reservoirs Dams force water to back up behind them into reservoirs which store the gravitational potential energy of water. The amount of energy stored is proportional to the head – the height of water in the reservoir above the turbine. The stored energy can be used to generate power. head, h

  4. Volumetric Flow Rate • Volume Flow Rate Through a Pipe Example: Water flows at a rate of 1 m/s through a round pipe with a diameter of 3 cm. What is the volumetric flow rate [L/s]? In this case, the pipe we’re talking about is the penstock that channels water from the reservoir to the turbines where power is transmitted to the generators. Q = AV Q, volumetric flow rate A, cross-sectional area V, average fluid velocity

  5. How much power does a hydro turbine produce? Power = hrghQ h, efficiency g, acceleration of gravity r, density h, head Q, volume flow rate Example: A hydroelectric plant employs a turbine with an overall efficiency of 85% in conditions where the flow rate is 30000 liters per second and the surface of the reservoir is 20m above the turbine. How much power is produced [kW]?

  6. Power, Head & Flow Rate Large h Small Q Average h Average Q Small h Large Q This image shows a cross-section of surface run-off at three separate locations: (A) a small, fast-flowing, steep mountain stream; (B) a deep, quick flowing river in a narrow channel; and (C) a very wide, but shallow, slow-moving river. As we follow the run-off from A to C, the vertical drop of the water flow decreases (h goes down), but the volumetric flow rate increases (Q goes up). This means that, in theory, it would be possible to achieve the same power when installing a hydroelectric power plant at any of the three locations shown.

  7. Types of Turbines • Impulse • Pelton Wheel - large h, small Q • Reaction • Kaplan - small h, large Q • Francis - large h, large Q Pelton Wheel Kaplan Francis

  8. Choosing Turbines Which type of turbine would you choose if you were designing a hydroelectric power plant for a site similar to the conditions at location C? Why?

  9. What’s Coming Up? • Impacts on Environment/Society

More Related