1 / 43

The following demo demonstrates features and benefits of the Fasfold CNC controller when

The following demo demonstrates features and benefits of the Fasfold CNC controller when retrofitted to a new or used Slitter Folder. It uses a 15 “color touch screen which makes it lightning fast to alter or enter things. It can control from 2 to 4 axis.

brant
Download Presentation

The following demo demonstrates features and benefits of the Fasfold CNC controller when

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The following demo demonstrates features and benefits of the Fasfold CNC controller when retrofitted to a new or used Slitter Folder It uses a 15 “color touch screen which makes it lightning fast to alter or enter things. It can control from 2 to 4 axis. It can utilize AC or DC servocontrol There are 43 slides Use the left mouse click to go to the next slide. Use the Backspace key to go to the previous slide. You can also run the actual program from your desktop.

  2. Whenever you press on any value…. This keypad pops up which allows you to enter data

  3. Finger touch Quickdraw to go to the Quickdraw screen

  4. Touch here to start the profile

  5. Touch here for end of 1st length

  6. Touch here for next bend Touch here to change the grid size

  7. Touch here for next bend

  8. Touch here for last bend Lets say we placed it on the wrong corner. Use the Undo button to erase. Undo

  9. Undo erased the last bend

  10. Touch here to place the last bend correctly

  11. Touch this corner to move it in Use Draw/Edit to make changes

  12. Touch this corner to move it in

  13. Touch this corner to move it out again Use OK to return to The Main Screen

  14. Any values can be altered here to fine tune the profile Dimensions in the first and Angle in the second column

  15. Use Insert to insert a slit before a bend

  16. Enter the bend number where the slit needs to be inserted 1

  17. 28.2 plus.. This is the Backgauge position For the slit based on the total of all the dimensions of the profile It can be altered if needed. It is calculated automatically. Press OK. 90 plus.. 50 plus.. 14.2 = 182.4 This is the total length of the profile above

  18. 182.4 for the first slit The (- blue) for fold 2 & 3 indicates the folds is done on the bottom side of the material

  19. The ( -) Blue in the first column indicates the fold needs to be done from the rear of the material Use sequence to select a specific folding order other than 1234

  20. Lastly press 2 for the last fold First press 1 for the slit Next is 4 then 3 for the next 2 folds

  21. You have now selected a 231 sequence ( if the slit is ignored)

  22. Simulate any fold… By pressing on any fold number below

  23. This fold needs to be Done from the rear…

  24. So this needs to change to minus 28.2

  25. Now the profile sits on the outside rather than the inside Use this key to change Between 1 & 2 operators

  26. Use this key to change Between 1 & 2 operators

  27. Use this key to enter a job number

  28. With alphanumeric characters

  29. Use this key to save the job

  30. Enter the password And press OK

  31. Use this key to open a new job

  32. Press Yes

  33. Touch on the Job you want Or press UP & Down to scroll to another page

  34. The job opens with all relevant data like which folds is done from the rear or bottom etc

  35. Also the previous fold sequence.. Saves a lot of time.

  36. Fold 1 needs to be changed to (-) in the first column

  37. So the material sits outside the folder Use this to Toggle Between Auto & Manual mode

  38. This will take you to the Calibrate& Setup screen Use this to Toggle Between Auto & Manual mode

  39. When any input switches or outputs activated, they change between green and red. It is so quick and powerful to do diagnostics. When you press the footswitch, it changes to green and if the valve operates, it changes color as well. This minimizes down time. Hydraulic pump Encoder Top switch Valves This takes you to the Parameter screen Bottom switch Backgauge motor Valves Foot switches

  40. This takes you to the Calibration This is the Apron slow speed, fast speed, Tolerance etc. This is the Backgauge slow speed, fast speed, Tolerance etc.

  41. Calibration is as easy as entering the actual measured values in here. This takes you back To the Main screen

  42. Jobs can also be downloaded from the office This button downloads the job to the PLC on the machine

More Related