1 / 18

Structures and Weights 1 QDR

Structures and Weights 1 QDR. AAE 451: Team 2. Michael Caldwell Jeff Haddin Asif Hossain James Kobyra John McKinnis. Kathleen Mondino Andrew Rodenbeck Jason Tang Joe Taylor Tyler Wilhelm. Overview. Wing Structure Geometric Layout Properties of Wing Box Material Properties

breck
Download Presentation

Structures and Weights 1 QDR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Structures and Weights 1 QDR AAE 451: Team 2 Michael Caldwell Jeff Haddin Asif Hossain James Kobyra John McKinnis Kathleen Mondino Andrew Rodenbeck Jason Tang Joe Taylor Tyler Wilhelm

  2. Overview • Wing Structure • Geometric Layout • Properties of Wing Box • Material Properties • Structural Geometry • Wing Loading Analysis • Landing Techniques • Weight Estimate

  3. Aircraft 3-View Mission Requirements • 15 min. endurance • Take-off distance ≤ 60 ft. • Vstall ≤ 15 ft./s • Vloiter ≤ 25 ft./s • 35 ft. turn radius

  4. Geometric Layout

  5. Properties of Wing Box • Shear Web • 1.6 in. x 0.125 in. (0.1333 ft. x 0.0104 ft.) • Wing Spar • Central I beam located at maximum wing thickness • With shear web and two stringers • Ribs • Balsa • 20 ribs spaced approximately every 3 inches • Stringers • Balsa • 0.375 in. x 0.375 in. (0.03125 ft. x 0.03125 ft.) leading edge stringer • 0.375 in. x 0.75 in. (0.03125 ft. x 0.0625 ft.) trailing edge stringer for mounting aileron • Monokote wing covering • All parts: 11 lbf/ft3 balsa • High safety factor (oversized web/stringers)

  6. Material Properties

  7. Structural Geometry • Balsa construction • Lightweight • Simple, quick construction • Monokote covering

  8. Wing Loading Analysis • Constraints • Analysis • Load Distribution at Maximum Wing Loading • Maximum Wing Root Bending Moment • Maximum Torsional Moment

  9. Bending • Worst case simplification • cantilevered beam • uniform load distribution • negligible outer fuselage mass/support

  10. Twisting • Moment due to lift found from moment coefficient

  11. Constraints • Twisting: less than one degree of twist • Bending: bending stress less than balsa yield stress (w/ safety factor of 2)

  12. Analysis • Maximum wing load: • 1.97 lbs of lift, assuming uniform distribution and span • Maximum bending moment (at root): • 1.308 ft-lbs • Maximum torsional moment (from Cm): • 0.194 ft-lbs

  13. Landing Techniques • Belly Landing • Conventional Landing Gear • Landing Skis • Parachute • Catching Net

  14. Weight Estimate • Weights of parts: • Fuselages: 0.317 lbf • Wing: 0.579 lbf • Canard: 0.133 lbf • Tails: 0.146 lbf • Motor: 0.172 lbf • Batteries: 0.113 lbf • Distance measured from front of aircraft • CG = 1.482 ft • AC = 1.589 ft • Static margin = 10.7%

  15. Summary • Wing Structure • Geometric Layout • Properties of Wing Box • Material Properties • Structural Geometry • Wing Loading Analysis • Landing Techniques • Weight Estimate • Questions?

  16. Appendix

  17. Airfoil Selection: Wing Wortmann FX 63-137 Wortmann FX 63-137: M.S.Selig,J.F.Donovan and D.B.Fraser,"AIRFOIL AT LOW SPEEDS” – Wind Tunnel

  18. Airfoil Selection: Canard NACA 0012

More Related