Bundaberg Sugar Case Study - Aline Pumps

1. www.alinepumps.com.au A leader in the Australian Sugar industry since 1882, Bundaberg Sugar is a grower, miller, refiner, and marketer of sugar and related products in Australia. The company is one of the country’s largest cane growers and owns and operates sugar mills in Queensland. Bundaberg Sugar participates in all levels of the raw sugar industry, with activities spanning the full sugar processing cycle including cane growing, milling, refining, packaging and distributing sugar products to retail, industrial and export customers. Bundaberg Sugar with Aline Pumps The reputation for quality that dates back to the late 1800's when the company first refined sugar in the Bundaberg area. As the refining process is essentially a continuous one, there are no distinct batches as such. Thus to produce the correct type of sugar there are a number of ongoing checks that occur during the refining operation to ensure that the correct specification for the sugar type is achieved at the end of the process. In an effort to protect their investment, Bundaberg Sugar has invested heavily to outfit the production facilities with state-of-the-art fire hydrant equipment. Teaming up with the leading specialist in the fire protection industry, Aline Group has over 20 years’ experience in specifying and building heavy duty systems to ensure our products can delivery when depended upon.

2. Diesel Electric Fire Booster Pump Diesel Electric Fire Booster Pumpset to AS2941-2013 Duty: l/s @ m head +130%l/s @ 80%m Aline end suction centrifugal pump with ductile cast iron housing, bronze impeller and stainless steel shaft. Pump shall be direct flexibly coupled to a kW 2,900rpm heat exchanger cooled diesel engine on a fabricated hot dip galvanized steel baseplate. Fitted to the unit is a diesel control panel with instrumentation and interconnecting engine wiring, self-bundled fuel tank with 6 hour capacity, muffler and flexible connector. Power Requirements: 240 volts, 1.5kW & 15 amps Jacking Pumps Aline AVM3-19 1.5kW 240 volt automatic pressure maintenance pump capable of 40l/min @ 100m, complete with control & monitoring panel, pressure switch, pressure gauge and pressure vessel. Pump mounted on a galvanized steel baseplate and wired to dedicated control panel. Jacking Pump is fully pre-piped with check valves and isolating valves fitted as required. Power Requirements: 240 volts, 1.5kW & 8.9 amps Electric Pump Unit Aline end suction centrifugal pump with ductile cast iron housing, bronze impeller and stainless steel shaft. Pump shall be direct flexibly coupled to a kW 2,900rpm 415/3/50 electric motor, mounted on a fabricated hot dip galvanized steel baseplate with coupling guard. Unit shall be fitted with a kW Star Delta/DOL electric control panel, mounted and workshop wired. Power Requirements: volts, kW & amps mm Hydrant Manifold Unit fully piped with mm gear operated butterfly valves and duo type check valves on pump discharges. Suction fitted with mm OS&Y gate valves. Pressure relief valve fitted to main pump discharges. Inclusions - Pre-delivery performance test to the requirements of AS2417 Part 2 Class C. - Commissioning on site after installation. - Starting and control batteries. - Water jacket heater on diesel engine. - Mounts for bases. - Three (3) copies of Operation & Maintenance manuals. - DIESEL ENGINE - 2 YEAR WARRANTY