1 / 65

CCNA Discovery 1 Chapter 5: Network Addressing

CCNA Discovery 1 Chapter 5: Network Addressing. Contents . 5.1: IP Addresses & Subnet Masks 5.1.1 - Purpose of an IP Address 5.1.2 – Address Structure 5.1.3 – Parts of an Address 5.1.4 – IP Addresses & Subnet Masks 5.2: Types of IP Addresses 5.2.1 – Address Classes

brian
Download Presentation

CCNA Discovery 1 Chapter 5: Network Addressing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CCNA Discovery 1Chapter 5:Network Addressing

  2. Contents • 5.1: IP Addresses & Subnet Masks • 5.1.1- Purpose of an IP Address • 5.1.2– Address Structure • 5.1.3 – Parts of an Address • 5.1.4– IP Addresses & Subnet Masks • 5.2: Types of IP Addresses • 5.2.1 – Address Classes • 5.2.2 – Public vs. Private Addresses • 5.2.3 – Unicast, Broadcast and Multicast • 5.3: Obtaining IP Addresses • 5.3.1 – Static vs Dynamic Addresses • 5.3.2– DHCP Servers • 5.3.3 – Configuring DHCP • 5.4: Address Management • 5.4.1 – Address Space • 5.4.2 – Address Assignment • 5.4 3. – NAT • 5.5: Booleans and Anding

  3. 5.1.1: Purpose of the IP Address • An IP address is a logical network address that identifies a particular host on a network • The IP address is assigned to the Network interface connection for a host. • All hosts need a unique IP address to participate and communicate with other devices on the Internet. • This includes workstations, servers, network printers and IP phones • Some servers can have more than one NIC and each of these has its own IP address. • Router interfaces that provide connections to an IP network will also have an IP address. • Every packet sent across the Internet has a source and destination IP address. • This information is required by networking devices to insure the information gets to the destination and that any replies are returned to the source.

  4. 5.1.2: IP Address Structure • IP Addresses are 32 bit addresses written in dotted decimal notation • The address is represented by 32 bits (zeros and ones) • The 32 bits are grouped into four 8-bit bytes called octets. • Each octet is represented by its decimal value, separated by a decimal point or period. • Example: 192.168.1.5 • This represents the address: 11000000101010000000000100000101 • The dotted decimal format is much easier to use • The 32-bit IP address is called IP version 4 (IPv4) addressing and is currently the most common form of IP address on the Internet. • There are over 4 billion possible IP v4 addresses

  5. Converting IP Addresses • When a host receives an IP address, it reads it as bits as they are received on the NIC. • Humans, on the other hand, need to convert those 32 bits into their four octet decimal equivalent. • Each octet can be converted just like any other 8 bit binary number • The maximum values for each octet are: • Binary : 11111111 • Decimal: 255

  6. Conversion of an IP Address

  7. 5.1.3: Parts of an IP Address • IP addresses are hierarchical and re made up of two parts.: • The Network Portion: identifies the network • The Host Portion: identifies a host on that network • IP Addressing is considered hierarchical addressing because the network portion indicates the network on which each unique host address is located. • Telephone numbers are also hierarchical : the country code, area code and exchange represent the network address and the remaining digits represent a local phone number • Example: The IP host address192.168.18.57 • The 1st 3 octets are the Network portion: 192.168.18 • The last octet is the Host portion: 57

  8. Network Addresses • The network portion of the address, is used to represent the entire network • It represents a group of IP addresses that can be used on that network • The network address is created by taking the Network portion of the address and putting all 0’s in the host portion of the address • 192.168.18.00000000 • 192.168.18.0 • The Network address is not a usable host IP address • Network addresses are only used by routers to decide how to get packets to their destination

  9. Usable Host Addresses • As we just saw, the Network address is not a usable host address • A usable host IP address is an IP address that does not have all 0’s or 1’s in the host portion of the address • Only a usable host IP address can be assigned to a host device • Example: on the network 192.168.18.0, the usable host IP addresses are: • 192.168.18.1 to 192.168.18.254

  10. Host vs. Network Portion Network Number Host Number

  11. Network vs. Host Portion Network Addresses Host IP Addresses

  12. 5.1.4: Subnet Masks • Since there are two parts to every IP address, how do hosts and routers know which portion is the network and which is the host? • This is the job of the subnet mask • A subnet mask is a 32 bit address, like an IP address, which is written in dotted decimal notation • The subnet mask is a special address that tells devices which part of the IP address is network and which part is host • A subnet mask is assigned to devices at the same time as the IP address • Example Subnet Masks: • 255.255.255.0 • 255.255.0.0 • 255.255.255.128 • 255.254.0.0

  13. How is the Subnet Mask Used? • When a host sends a packet, it uses the Subnet mask to decide if the packet is destined for a host on the local network or on a different network: • It compares its own subnet mask to its own IP address, from left to right, bit for bit. • The 1s in the subnet mask represent the network portion; the 0s represent the host portion • Once it knows what network it belongs to, it compares its own subnet mask to the destination IP address • If the network bits in its own address and the destination address match, it knows that the destination host is on the same network • This means the packet can be delivered locally • If the network bits do not match, the sending host forwards the packet to the local router interface to be forwarded to the other network.

  14. Using the Subnet Mask

  15. Network vs. Host Bits • The subnet masks we see most often with home and small business networking are: • 255.0.0.0 (8-bit network) {11111111.00000000.00000000.00000000} • 255.255.0.0 (16 bit network) {11111111. 11111111.00000000.00000000} • 255.255.255.0 (24 bit network) {11111111.11111111.1111111.00000000} • A subnet mask of 255.0. 0.0 uses 8 bits to identify the network number, which leaves 24 bits to create host addresses for the network • A subnet mask of 255.255. 0.0 uses 16 bits to identify the network number, which leaves 16 bits to create host addresses for the network • A subnet mask of 255.255.255.0 uses 24 bits to identify the network number which leaves 8 bits to number the hosts on that network.

  16. Available Host Addresses • The number of available host addresses on a network can be calculated with the formula: 2 ^ host bits – 2 Network type Available Hosts • 255.0.0.0 2 ^ 24 = 16, 777, 216 – 2 = 16, 277, 214 • 255.255.0.0 2 ^ 16 = 65, 536 – 2 = 65, 534 • 255.255.255.0 2 ^ 8 = 256 – 2 = 254 • The reason we always subtract 2 from the total host addresses to determine the available host addresses, is because a valid host address can not have all 0’s or all 1’s in the host portion of the address • Therefore, every network has 2 addresses that can not be assigned to hosts, the very 1st address (all 0’s in the host portion) and the very last address (all 1’s in the host portion)

  17. Network and Broadcast Addresses • Example Networks: • 120. • 170.5 • 192.168.10 • All 0’s in the host portion of an IP address, represents the Network Address for that network, and can not be assigned to a host • 120.0.0.0 • 170.5.0.0 • 192.168.10.0 • All 1s in the host portion of an IP address, represents the broadcast address for that network, and can not be assigned to a host • 120.255.255.255 • 170.5.255.255 • 192.168.10.255

  18. 5.2.1: IP v. 4 Address Classes • As we have seen, the IP address and subnet mask work together to determine which portion of the IP address represents the network address and which portion represents the host address. • IP v. 4 addresses are grouped into 5 classes: • Classes A, B and C are commercial addresses and are assigned to business, organizations and individuals to be used for hosts on the Internet • Class D is reserved for multicast use • Class E is for experimental use

  19. Commercial IP Address Classes • Class C addresses are usually assigned to small networks • Use 3 octets for the network and 1 for the hosts N.N.N.H • The default subnet mask is 24 bits: 255.255.255.0 • 2, 097, 150 (2 ^ 21 – 2) possible networks • 254 (2 ^ 8 – 2) available host addresses per network • Class B addresses are typically used for medium-sized networks • Use 2 octets for the network and 2 for the hosts N.N.H.H • The default subnet mask is 16 bits: 255.255.0.0 • 16, 382 (2 ^ 14 – 2) possible networks • 65, 534 (2 ^ 16 – 2) available host addresses per network • Class A addresses are typically assigned to large organizations. • Use 1 octet for the network and 3 for the hosts N.H.H.H • The default subnet mask is 8 bits: 255.0.0.0 • 126 (2 ^ 7 – 2) possible networks • 16, 777, 214 (2 ^ 24 – 2) available host addresses per network

  20. The value of the 1st Octet • The class of an address can be determined by the value of the first octet • Each Class of IP Address can only begin with a certain value • Also notice, that there is a leading bit pattern that never changes for each class of addresses Class Decimal Value of 1st Octet Leading Bit value • Class A 1 - 1260 • Class B 128 – 19110 • Class C 192 – 223110 • Class D 224 – 2391110 • Class E 240 – 2551111

  21. 1 to 126

  22. All hosts that connect directly to the Internet require a unique public IP address. Because there are a limited number of 32-bit addresses available, there is a risk of running out of IP addresses. One solution to this problem was to reserve some private addresses for use exclusively inside an organization. Private IP Addresses allow hosts within an organization to communicate with one another without needing a unique public IP address. The RFC 1918 standard reserves 3 ranges of Private IP Addresses, for classes A, B and C. 5.2.2: Public vs. Private Addresses

  23. Private Network Addresses Private Network Addresses

  24. Private IP Addresses Private addresses can be used internally by hosts in an organization as long as the hosts do not connect directly to the Internet. Private addresses are not routed on the Internet and are blocked by ISP routers. Hosts that are using private addresses, must use the services a computer or network device with a public IP address to access the Internet. This allows multiple organizations to use the same set of private addresses internally. The use of private addresses can also provide a measure of security since they are only visible on the local network, and outsiders cannot gain direct access to the private IP addresses.

  25. The Loopback Address There are also private addresses that can be used for the diagnostic testing of devices. This type of private address is known as a loopback address. The class A, 127.0.0.0 network address, is reserved for loopback testing. The loopback IP address, 127.0.0.1 is used to test a NIC card to verify that it is sending and receiving signals.

  26. Private IP Addresses

  27. In addition to address classes, we also categorize IP addresses as : Unicast - one-to-one Broadcast - one-to-many Multicast- one-to-all 5.2.3: Unicast, Broadcast, Multicast

  28. Unicast Addresses A unicast address is the most common type on an IP network. A packet with a unicast destination address is intended for a specific host. Example: a host with IP address 192.168.1.5 (source) requests a web page from a server at IP address 192.168.1.200 (destination) For a unicast packet to be sent and received, a destination IP address must be in the IP packet header. A corresponding destination MAC address must also be present in the Ethernet frame header. The IP address and MAC address combine to deliver data to one specific destination host.

  29. Unicast Addresses

  30. Multicast IP Address Multicast IP addresses allow a source device to send a packet to a group of devices. Devices that belong to a multicast group are assigned a multicast group IP address. The range of multicast addresses is: 224.0.0.0 to 239.255.255.255 Since multicast addresses represent a group of addresses (sometimes called a host group), they can only be used as the destination of a packet. The source will always have a unicast address. Examples: Remote gaming, with many players connected remotely to the same server Distance learning through video conferencing, with many students connected

  31. Multicast MAC Addresses A packet with a destination multicast IP address needs a corresponding multicast MAC address to actually deliver the packet on the local network. The multicast MAC address is a special value that begins with 01-00-5E in hexadecimal. The rest of the address is a result of converting the lower 23 bits of the IP multicast group address into the remaining 6 hexadecimal characters of the Ethernet address. Example: Multicast IP Address: 224. 15.100.197 Multicast MAC Address: 01-00-5E-0F-64-C5

  32. Multicast MAC Address Example Multicast IP Address: 224.15.100.197 Multicast MAC Address: 01-00-5E-0F-64-C5 01-00-5E - Standard Multicast MAC prefix 0F-64-C5 = The last 23 bits of the Multicast IP address in HEX Conversion: The last 23 bits of the IP address are: 0001111.01100010.11000101 Those bits in Hex are: 000 = 0 1111= F (15) 0110 = 6 0010 = 4 1100 = C (12) 0101 = 5

  33. Multicast Addresses

  34. Broadcast IP Address A Broadcast IP Address has all ones (1s) in the host portion. A Broadcast packet will be received and looked at by every host in the local network, or in the broadcast domain Many network protocols, such as ARP and DHCP use broadcasts. Examples: The Class C network 192.168.1.0 uses the Broadcast address 192.168.1.255 The Class B network 172.16.0.0 uses the broadcast address 172.16.255.255 The Class A network 10.0.0.0 uses the broadcast address 10.255.255.255.

  35. Broadcast MAC Address A packet with a broadcast IP address needs a corresponding broadcast MAC address in the Ethernet frame. On Ethernet networks, the broadcast MAC address is FF-FF-FF-FF-FF-FF

  36. Broadcast Addresses

  37. With static IP assignment, the network administrator must manually configure the network information for a host. At a minimum, this includes the host IP address, subnet mask and default gateway. Static addresses have some advantages: Useful for printers, servers and other networking devices that need to be accessible to clients on the network. Can provide increased control of network resources, Static Addresses have some disadvantages: Time Consuming The host only performs basic error checks on the IP address. So errors are more likely to occur. When using static IP addressing, it is important to maintain an accurate list of which IP addresses are assigned to which devices. 5.3.1: Static IP Addresses

  38. Static IP Addressing

  39. Dynamic IP Addresses Dynamic Assignment of IP Addresses is achieved using a protocol known as Dynamic Host Configuration Protocol (DHCP). DHCP can provide the automatic assignment of addressing information such as IP address, subnet mask, default gateway, and other configuration information. Advantages: On local networks the user population changes frequently It reduces the burden on network support staff It virtually eliminates IP Address entry errors Addresses are not permanently assigned to a host but are only leased for a period of time. If the host is powered down or taken off the network, the address is returned to the pool for reuse.

  40. Dynamic IP Addressing

  41. How does a Host receive an IP Address with DHCP? The host acts as a DHCP client and contacts the local DHCP server The DHCP server assigns an IP address to your laptop. A DHCP Server is a device that is running the DHCP service software. A dedicated PC or server (medium to large networks) An Integrated Router (home networks) A dedicated Router (an ISP) Many home networks and small businesses use an integrated router to connect to the ISP modem. In this case, the integrated router is both a DHCP client and a server. The integrated router acts as a client to receive its IP configuration from the ISP and It then acts a DHCP server for internal hosts on the local network. 5.3.2: DHCP Server

  42. DHCP Services

  43. When a host is first configured as a DHCP client, it does not have an addressing information It obtains this information from a DHCP server, either on the local network or one located at the ISP. The DHCP server is configured with a range, or pool, of IP addresses that can be assigned to DHCP clients. These are the 4 steps in the DHCP Negotiation Process: When a client configured with DHCP boots, it sends out a DHCP Discover message Using the broadcast destination IP 255.255.255.255 and the broadcast destination MAC FF-FF-FF-FF-FF-FF All hosts on the network will receive this broadcast DHCP frame, but only a DHCP server will reply. The DHCP server will respond with a DHCP Offer, suggesting an IP address for the client. The host then sends a DHCP Request to that server asking to use the suggested IP address. The server responds with a DHCP Acknowledgment. 5.3.3 DHCP Negotiation

  44. Configuring DHCP on an ISR For most home and small business networks, a multi-function device provides DHCP services to the local network clients. To configure a Linksys wireless router, you access its graphical web interface by opening the browser and entering the in the router’s default IP address: 192.168.1.1 Other brands of wireless routers might use the default address 192.168.1.254 or 192.168.2.1 The IP address 192.168.1.1 and subnet mask 255.255.255.0 are the defaults for the internal router interface. This is the default gateway for all hosts on the local network and also the internal DHCP server IP address. DHCP configuration: Most ISR have DHCP Server enabled by default Use the default DHCP range or specify your own (do not use 192.168.1.1) Specify the lease time (default is 24 hours). Verify DHCP Configuration: The DHCP Client Table shows the client name and whether it is connected via the Ethernet LAN or wireless (Interface).

  45. ISR DHCP Configuration

  46. A router provides a gateway through which hosts on one network can communicate with hosts on different networks. Each interface on a router is connected to a separate network. The IP address assigned to the router interface identifies which local network is connected directly to it. Every host on a network must use the router as a gateway to other networks. Therefore, each host must know the IP address of the router interface connected to the network where the host is attached. This address is known as the default gateway address. It can be either statically configured on the host, or received dynamically by DHCP. 5.4.1: Default Gateway

  47. Default Gateway with an ISR When an integrated router is configured to be a DHCP server for the local network, it automatically sends the correct interface IP address to the hosts as the default gateway address. All hosts on the network can use that IP address to forward messages to hosts located at the ISP and get access to hosts on the Internet. The IP address of that local router interface becomes the default gateway address for all hosts on the network

  48. Default Gateway

  49. When hosts on a local network use the services of a DHCP server, they are referred to as being located on an internal, or inside, network. Most DHCP servers are configured to assign private addresses to the hosts on the internal network This secures the internal network because it is not directly accessible from the Internet Many ISPs also use DHCP servers to provide IP addresses to the Internet side of home or small business routers installed at their customer sites. The network address assigned to the Internet side of the integrated router is referred to as the external, or outside, network. 5.4.2: Address Assignment

  50. ISR Address Assignment The default IP address configured on an ISR router interface is usually a private Class C address. The Internal hosts must also be assigned addresses within the same network as the integrated router, either statically configured, or through DHCP. When configured as a DHCP server, the integrated router provides host addresses in this range. It also provides the subnet mask information and its own interface IP address as the default gateway. When an integrated router is connected to the ISP, it acts like a DHCP client to receive the correct external network IP address for the Internet interface. When using an ISR on a home network, all hosts use the same PUBLIC Internet-routable address to connect to the internet

More Related