1 / 25

6-5

6-5. Drawing Three-Dimensional Figures. Warm Up. Problem of the Day. Lesson Presentation. Course 3. 6-5. Drawing Three-Dimensional Figures. Course 3. Warm Up. Find the circumference of each circle, both in terms of p and to the nearest tenth. Use 3.14 for p . 5 p m; 15.7 m.

brilliant
Download Presentation

6-5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 6-5 Drawing Three-Dimensional Figures Warm Up Problem of the Day Lesson Presentation Course 3

  2. 6-5 Drawing Three-Dimensional Figures Course 3 Warm Up Find the circumference of each circle, both in terms of p and to the nearest tenth. Use 3.14 for p. 5p m; 15.7 m 1. radius 2.5 m 2. diameter 8.8 cm 8.8p cm; 27.6 cm Find the area of each circle, both in terms of p and to the nearest tenth. Use 3.14 for p. 3. radius 14 ft 196p ft2; 615.4 ft2 49p ft2; 153.9 ft2 4. diameter 14 ft

  3. 6-5 Drawing Three-Dimensional Figures Course 3 Problem of the Day What is the least number of lines needed to draw 5 squares ? 6

  4. 6-5 Drawing Three-Dimensional Figures Course 3 Drawing 3 Dimensional Figures Learn to draw and identify the parts of three-dimensional figures. Course 3

  5. 6-5 Drawing Three-Dimensional Figures Course 3 Vocabulary face edge vertex perspective vanishing point horizon line

  6. 6-5 Drawing Three-Dimensional Figures Course 3 Three-dimensional figures have faces, edges, and vertices. A face is a flat surface, an edge is where two faces meet, and a vertex is where three or more edges meet.

  7. 6-5 Drawing Three-Dimensional Figures Vertex Edge Face Course 3 Isometric dot paper can be used to draw three-dimensional figures.

  8. 6-5 Drawing Three-Dimensional Figures Course 3 Additional Example 1: Drawing a Rectangular Box Use isometric dot paper to sketch a rectangular box that is 5 units long, 3 units deep and 2 units tall. Step 1: Lightly draw the edges of the bottom face. It will look like a parallelogram. 3 units by 5 units Step 2: Lightly draw the vertical line segments from the vertices of the base. 2 units high Step 3: Lightly draw the top face by connecting the vertical lines to form a parallelogram. 3 units by 5 units Step 4: Darken the lines. Use solid lines for the edges that are visible and dashed lines for the edges that are hidden.

  9. 6-5 Drawing Three-Dimensional Figures Course 3 Additional Example 1: Continued Use isometric dot paper to sketch a rectangular box that is 5 units long, 3 units deep and 2 units tall.

  10. 6-5 Drawing Three-Dimensional Figures • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Course 3 Try This: Example 1 Use isometric dot paper to sketch a rectangular box that is 4 units long, 2 units deep, and 3 units tall.

  11. 6-5 Drawing Three-Dimensional Figures Course 3 Try This: Example 1 Continued Step 1: Lightly draw the edges of the bottom face. It will look like a parallelogram. 2 units by 4 units • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

  12. 6-5 Drawing Three-Dimensional Figures Course 3 Try This: Example 1 Continued Step 2: Lightly draw the vertical line segments from the vertices of the base. 3 units high • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

  13. 6-5 Drawing Three-Dimensional Figures Course 3 Try This: Example 1 Continued Step 3: Lightly draw the top face by connecting the vertical lines to form a parallelogram. 2 units by 4 units • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

  14. 6-5 Drawing Three-Dimensional Figures Course 3 Try This: Example 1 Continued Step 4: Darken the lines. Use solid lines for the edges that are visible and dashed lines for the edges that are hidden. • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

  15. 6-5 Drawing Three-Dimensional Figures Course 3 Perspective is a technique used to make drawings of three-dimensional objects appear to have depth and distance. In one-point perspective drawings, there is one vanishing point.

  16. 6-5 Drawing Three-Dimensional Figures V G A B Step 3: Choose a point G on BV and draw a smaller square that has G as one of its vertices. C D Course 3 Additional Example 2: Sketching a One Point Perspective Drawing Sketch a one-point perspective drawing of a cube. Step 1: Draw a square. This will be the front face. Label the vertices A through D. Step 2: Mark a vanishing point V above your square, and draw a dashed line from each vertex to V. Step 4: Darken the visible edges, and draw dashed segments for the hidden edges. Erase the vanishing point and the lines connecting it to the vertices.

  17. 6-5 Drawing Three-Dimensional Figures Step 3: Choose a point G on BV and draw a smaller square that has G as one of its vertices. Course 3 Additional Example 2: Sketching a One Point Perspective Drawing Sketch a one-point perspective drawing of a cube. Step 1: Draw a square. This will be the front face. Label the vertices A through D. Step 2: Mark a vanishing point V above your square, and draw a dashed line from each vertex to V. Step 4: Darken the visible edges, and draw dashed segments for the hidden edges. Erase the vanishing point and the lines connecting it to the vertices.

  18. 6-5 Drawing Three-Dimensional Figures V G A B Step 3: Choose a point G on BV and draw a smaller rectangle that has G as one of its vertices. C D Course 3 Try This: Example 2 Sketch a one-point perspective drawing of a rectangular box. Step 1: Draw a rectangle. This will be the front face. Label the vertices A through D. Step 2: Mark a vanishing point V above your rectangle, and draw a dashed line from each vertex to V. Step 4: Darken the visible edges, and draw dashed segments for the hidden edges. Erase the vanishing point and the lines connecting it to the vertices.

  19. 6-5 Drawing Three-Dimensional Figures G A B Step 3: Choose a point G on BV and draw a smaller rectangle that has G as one of its vertices. C D Course 3 Try This: Example 2 Sketch a one-point perspective drawing of a rectangular box. Step 1: Draw a rectangle. This will be the front face. Label the vertices A through D. Step 2: Mark a vanishing point V above your rectangle, and draw a dashed line from each vertex to V. Step 4: Darken the visible edges, and draw dashed segments for the hidden edges. Erase the vanishing point and the lines connecting it to the vertices.

  20. 6-5 Drawing Three-Dimensional Figures Course 3 You can also draw a figure in two-point perspective by using two vanishing points and a horizon line. Moving the horizon line up and down gives you different views of the figure.

  21. 6-5 Drawing Three-Dimensional Figures Draw a vertical segment AD. Draw a horizontal line above AD and label the vanishing points V and W. Draw dashed segments AV, AW, DV, and DW. Label C on DV and E on DW so that CE = ED. Draw vertical segments through C and E. Draw EV and CW. Course 3 Additional Example 3: Sketching a Two-Point Perspective Drawing Sketch a two-point perspective drawing of a cube.

  22. 6-5 Drawing Three-Dimensional Figures Course 3 Additional Example 3: Sketching a Two-Point Perspective Drawing Sketch a two-point perspective drawing of a cube. Darken the visible edges. Erase the horizon and dashed segments.

  23. 6-5 Drawing Three-Dimensional Figures V W E C D A Draw a vertical segment AD. Draw a horizontal line above AD and label the vanishing points V and W. Draw dashed segments AV, AW, DV, and DW. Label C on DV and E on DW so that CE = ED. Draw vertical segments through C and E. Draw EV and CW. Course 3 Try This: Example 3 Sketch a two-point perspective drawing of a rectangular box. Darken the visible edges. Erase the horizon and dashed segments.

  24. 6-5 Drawing Three-Dimensional Figures Draw a vertical segment AD. Draw a horizontal line above AD and label the vanishing points V and W. Draw dashed segments AV, AW, DV, and DW. Course 3 Try This: Example 3 Sketch a two-point perspective drawing of a rectangular box. Label C on DV and E on DW. Draw vertical segments through C and E. Draw EV and CW. Darken the visible edges. Erase the horizon and dashed segments.

  25. 6-5 Drawing Three-Dimensional Figures Course 3 Lesson Quiz 1. Use isometric dot paper to sketch a rectangle box 3 units tall with a base of 2 units by 5 units. 2. Sketch a cube in one-point perspective. 3. Sketch a brick in two-point perspective.

More Related