1 / 22

Lecture 31 System Test

Lecture 31 System Test. Definition Functional test Diagnostic test Fault dictionary Diagnostic tree System design-for-testability (DFT) architecture System partitioning Core test-wrapper DFT overhead Summary. A System and Its Testing.

brinly
Download Presentation

Lecture 31 System Test

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 31System Test • Definition • Functional test • Diagnostic test • Fault dictionary • Diagnostic tree • System design-for-testability (DFT) architecture • System partitioning • Core test-wrapper • DFT overhead • Summary VLSI Test: Bushnell-Agrawal/Lecture 31

  2. A System and Its Testing • A system is an organization of components (hardware/software parts and subsystems) with capability to perform useful functions. • Functional test verifies integrity of system: • Checks for presence and sanity of subsystems • Checks for system specifications • Executes selected (critical) functions • Diagnostic test isolates faulty part: • For field maintenance isolates lowest replaceable unit (LRU), e.g., a board, disc drive, or I/O subsystem • For shop repair isolates shop replaceable unit (SRU), e.g., a faulty chip on a board • Diagnostic resolution is the number of suspected faulty units identified by test; fewer suspects mean higher resolution VLSI Test: Bushnell-Agrawal/Lecture 31

  3. System Test Applications Application Functional test Diagnostic test Resolution Manufacturing Yes LRU, SRU Maintenance Yes Field repair LRU Shop repair SRU A LRU: Lowest replaceable unit SRU: Shop replaceable unit VLSI Test: Bushnell-Agrawal/Lecture 31

  4. Functional Test • All or selected (critical) operations executed with non-exhaustive data. • Tests are a subset of design verification tests (test-benches). • Software test metrics used: statement, branch and path coverages; provide low (~70%) structural hardware fault coverage. • Examples: • Microprocessor test – all instructions with random data (David, 1998). • Instruction-set fault model – wrong instruction is executed (Thatte and Abraham, IEEETC-1980). VLSI Test: Bushnell-Agrawal/Lecture 31

  5. Gate-Level Diagnosis Karnaugh map (shaded squares are true outputs) Logic circuit b a d T2 T1 b e c a T4 T3 c Stuck-at fault tests: T1 = 010 T2 = 011 T3 = 100 T4 = 110 VLSI Test: Bushnell-Agrawal/Lecture 31

  6. Gate Replacement Fault Karnaugh map (faulty output shown in red) Faulty circuit (OR replaced by AND) b a d T2 T1 b e c a T4 T3 c Stuck-at fault tests: T1 = 010 (pass) T2 = 011 (fail) T3 = 100 (pass) T4 = 110 (fail) VLSI Test: Bushnell-Agrawal/Lecture 31

  7. Bridging Fault Faulty circuit (OR bridge: a, c) Karnaugh map (red squares are faulty outputs) b a+c a d T2 T1 b e c a T4 T3 a+c c Stuck-at fault tests: T1 = 010 (pass) T2 = 011 (pass) T3 = 100 (fail) T4 = 110 (pass) VLSI Test: Bushnell-Agrawal/Lecture 31

  8. Fault Dictionary Fault Test syndrome t1 t2 t3 t4 No fault a0, b0, d0 a1 b1 c0 c1, d1, e1 e0 0 1 0 0 0 0 1 0 0 0 0 1 0 1 0 0 0 1 0 1 0 0 0 1 0 0 1 0 a0 : Line a stuck- at-0 ti = 0, if Ti passes = 1, if Ti fails VLSI Test: Bushnell-Agrawal/Lecture 31

  9. Diagnosis with Dictionary Dictionary look-up with minimum Hamming distance Fault Test syndrome Diagnosis t1 t2 t3 t4 OR AND 0 1 0 1 e0 OR-bridge (a,c) 0 0 1 0 b1 OR NOR 1 1 1 1 c1, d1, e1, e0 VLSI Test: Bushnell-Agrawal/Lecture 31

  10. Diagnostic Tree No fault found T3 b1 T2 c0 OR bridge (a,c) T1 Pass: t4=0 a1 T3 a1, c1, d1, e1 c1, d1, e1 T4 a0, b0, d0 Fail: t4=1 T2 a0, b0, d0, e0 OR AND e0 OR NOR VLSI Test: Bushnell-Agrawal/Lecture 31

  11. System Test: A DFT Problem • Given the changing scenario in VLSI: • Mixed-signal circuits • System-on-a-chip • Multi-chip modules • Intellectual property (IP) cores • Prepare the engineer for designing testable, i.e., manufacturable, VLSI systems. VLSI Test: Bushnell-Agrawal/Lecture 31

  12. Conventional Test:In-Circuit Test (ICT) • A bed-of-nails fixture provides direct access to each chip on the board. • Advantages: Thorough test for devices; good interconnect test. • Limitations: • Works best when analog and digital functions are implemented on separate chips. • Devices must be designed for backdriving protection. • Not applicable to system-on-a-chip (SOC). • Disadvantages: • High cost and inflexibility of test fixture. • System test must check for timing. VLSI Test: Bushnell-Agrawal/Lecture 31

  13. Tested parts In-circuit test (ICT) Easy test access Bulky Slow High assembly cost High reliability Fast interconnects Low cost Untested cores No internal test access Mixed-signal devices PCB vs. SOC PCB SOC VLSI Test: Bushnell-Agrawal/Lecture 31

  14. Core-Based Design • Cores are predesigned and verified but untested blocks: • Soft core (synthesizable RTL) • Firm core (gate-level netlist) • Hard core (non-modifiable layout, often called legacy core) • Core is the intellectual property of vendor (internal details not available to user.) • Core-vendor supplied tests must be applied to embedded cores. VLSI Test: Bushnell-Agrawal/Lecture 31

  15. Partitioning for Test • Partition according to test methodology: • Logic blocks • Memory blocks • Analog blocks • Provide test access: • Boundary scan • Analog test bus • Provide test-wrappers (also called collars) for cores. VLSI Test: Bushnell-Agrawal/Lecture 31

  16. Test-Wrapper for a Core • Test-wrapper (or collar) is the logic added around a core to provide test access to the embedded core. • Test-wrapper provides: • For each core input terminal • A normal mode – Core terminal driven by host chip • An external test mode – Wrapper element observes core input terminal for interconnect test • An internal test mode – Wrapper element controls state of core input terminal for testing the logic inside core • For each core output terminal • A normal mode – Host chip driven by core terminal • An external test mode – Host chip is driven by wrapper element for interconnect test • An internal test mode – Wrapper element observes core outputs for core test VLSI Test: Bushnell-Agrawal/Lecture 31

  17. Wrapper elements Core Functional core inputs Functional core outputs Scan chain Scan chain from/to External Test pins Scan chain to/from TAP A Test-Wrapper Wrapper test controller VLSI Test: Bushnell-Agrawal/Lecture 31

  18. Overhead of Test Access • Test access is non-intrusive. • Hardware is added to each I/O signal of block to be tested. • Access interconnects are mostly local. • Hardware overhead is proportional to: (Block area) – 1/2 VLSI Test: Bushnell-Agrawal/Lecture 31

  19. Overhead Estimate Rent’s rule: For a logic block the number of gates G and the number of terminals t are related by t = K Ga where 1 < K < 5, and a ~ 0.5. Assume that block area A is proportional to G, i.e., t is proportional to A0.5. Since test logic is added to each terminal t, Test logic added to terminals Overhead = ------------------------------------------------- ~ A–0.5 A VLSI Test: Bushnell-Agrawal/Lecture 31

  20. DFT Architecture for SOC Test source Test sink User defined test access mechanism (TAM) Func. outputs Functional outputs Functional inputs Func. inputs Module 1 Module N Test Test wrapper wrapper Instruction register control Test access port (TAP) Serial instruction data TDI SOC outputs TMS TCK TDO SOC inputs TRST VLSI Test: Bushnell-Agrawal/Lecture 31

  21. DFT Components • Test source: Provides test vectors via on-chip LFSR, counter, ROM, or off-chip ATE. • Test sink: Provides output verification using on-chip signature analyzer, or off-chip ATE. • Test access mechanism (TAM): User-defined test data communication structure; carries test signals from source to module, and module to sink; tests module interconnects via test-wrappers; TAM may contain bus, boundary-scan and analog test bus components. • Test controller: Boundary-scan test access port (TAP); receives control signals from outside; serially loads test instructions in test-wrappers. VLSI Test: Bushnell-Agrawal/Lecture 31

  22. Summary • Functional test: verify system hardware, software, function and performance; pass/fail test with limited diagnosis; high (~100%) software coverage metrics; low (~70%) structural fault coverage. • Diagnostic test: High structural coverage; high diagnostic resolution; procedures use fault dictionary or diagnostic tree. • SOC design for testability: • Partition SOC into blocks of logic, memory and analog circuitry, often on architectural boundaries. • Provide external or built-in tests for blocks. • Provide test access via boundary scan and/or analog test bus. • Develop interconnect tests and system functional tests. • Develop diagnostic procedures. VLSI Test: Bushnell-Agrawal/Lecture 31

More Related