1 / 7

“Dynamic heat pump system with capacity control” Hatef Madani Dec . 2009

“Dynamic heat pump system with capacity control” Hatef Madani Dec . 2009. Project goals. Creating a “family” of models able to represent the dynamics of the real heat pump system consisting of the building, the heat pump unit, the heat source, pump, storage tank, climate, etc.

brittani
Download Presentation

“Dynamic heat pump system with capacity control” Hatef Madani Dec . 2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. “Dynamic heat pump system with capacity control”Hatef MadaniDec. 2009

  2. Project goals • Creating a “family” of models able to represent the dynamics of the real heat pump system consisting of the building, the heat pump unit, the heat source, pump, storage tank, climate, etc. • A quantitatively evaluation of different techniques for capacity control and control strategies for heat pump systems.

  3. Result example: Variable capacity vs. on/off controlled heat pump system Dynamic COP of both variable speed and on/off controlled GSHP

  4. Result example: Optimum mass flow rate of secondary refrigerant Overall COP and heat capacity vs. mass flow rate of secondary refrigerant at different compressor speed

  5. Examples of conclusions • Retrofitting a frequencyinverter to the on/offcontrolled heat pump to omit the electricalauxiliaryheater • Finding the optimum brinemassflowratedepending on the design objective (e.g. COP or heat capacitymaximization)

  6. List of publications • Internalreportcalled ”Capacitycontrol in heat pump systems:methods and strategies” wassubmitted in 2008. • The paper called “Variable capacity heat pump systems, modeling and simulation” was published in 9th IEA Heat pump conference, 2008. • The project was presented and described in Rehva journal (the journal of federation of European HVAC association), 2009. • Two papers called “Ventilation heat recovery with run around coil: System analysis and a study on efficiency improvement – Part I and II” were published and presented in ASHRAE Region-At-Large conference, 2009. • The paper called “Retrofitting a variable capacity heat pump to a ventilation heat recovery system: modelling and performance analysis “ was submitted to the IntrenaTional Conference on Applied Energy (ICAE), 2009.

  7. List of publications • The paper called “Capacity control in ground source heat pump systems, Part I:modeling and simulation” is ready to submit to Journal of International Institute of Refrigeration. • The paper called “Capacity control in ground source heat pump systems, Part II: Comparative analysis between on/off controlled and variable capacity systems” is almost ready to submit to Journal of International Institute of Refrigeration. • The paper called “The ground source heat pump: a system analysis with a particular focus on the U-pipe borehole heat exchanger” will be submitted to 14th ASME international heat transfer conference, before Jan. 15th 2010. • A quantitatively evaluation of different techniques for capacity control and control strategies for heat pump systems.

More Related