1 / 7

Large Prototype Endplate(s)

Large Prototype Endplate(s). Si-TPC Single-chip test detector. First step, not to flush 100 liters: 6 cm x 2cm x 2cm field cage fine gas tubes, USB readout To be tested in DESY test beam possibly X-ray polarimetry in the Soleil synchrotron In June : first prototype with Medipix 2 –MXR chip

brooke-mueller
Download Presentation

Large Prototype Endplate(s)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Large Prototype Endplate(s) P. Colas, Endplates

  2. Si-TPC Single-chip test detector • First step, not to flush 100 liters: 6 cm x 2cm x 2cm field cage • fine gas tubes, USB readout • To be tested in DESY test beam • possibly X-ray polarimetry in the Soleil synchrotron • In June : first prototype with Medipix 2 –MXR chip • In September real TPC with TimePix? P. Colas, Endplates

  3. LP endplate (s) Initial plans • Initial plans differ a lot (Saclay T2K: 2 large modules, 12 bolts / Cornell: 26 small modules, 80 bolts • But will converge fast, somewhere between these extremes Saclay T2K Cornell P. Colas, Endplates

  4. LP endplate (s) General principles(for discussion) • General idea: several modules (more than 2) • Gas-tightness. From the back of each module: minimize dead areas • Potential continuity • Modules can be different, some can be dummy • Cannot mix GEM and Micromegas on the same endplate (different running conditions, very different potentials and thickness) • However keep as similar as possible • Keep space for pixels P. Colas, Endplates

  5. Convergence Si chip readout P. Colas, Endplates

  6. Japanese contribution to the LP • They got >1 postdoc during 5 years + 50-100 k$/year • Can contribute by industry building endplates/pad boards. • Propose Endplate design meeting in Paris in September. • To clearly define goals of LP • To clearly define boundary conditions (field cage and electronic interfaces) • To agree on basic principles • To assess resources P. Colas, Endplates

  7. LEGS TPC (Brookhaven) : anode pads and ASIC plane P. Colas, Endplates Bo Yu, TPC application meeting, Berkeley, April 2006

More Related