1 / 11

Activités mécaniques 17 septembre 2013 D. Laporte F. De Matos / Y. Orain / P. Ghislain

Activités mécaniques 17 septembre 2013 D. Laporte F. De Matos / Y. Orain / P. Ghislain. Atlas / SLHC. Modélisation calorimètre. Barrel Endcap C&D Présampler Analyse X0 : Barrel : finie Présampler : finie Endcap C : 95 % Endcap D :. Coldchuck.

bruce-lloyd
Download Presentation

Activités mécaniques 17 septembre 2013 D. Laporte F. De Matos / Y. Orain / P. Ghislain

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Activités mécaniques17 septembre 2013D. LaporteF. De Matos / Y. Orain / P. Ghislain Atlas / SLHC

  2. Modélisation calorimètre • Barrel • Endcap C&D • Présampler • Analyse X0 : • Barrel : finie • Présampler : finie • Endcap C : 95 % • Endcap D :

  3. Coldchuck • Cf mail de filipe du 06 juin (poster)

  4. IBL : loadingat SR1

  5. IBL central ring (100% Made in LPNHE) • 2 pièces  7 Pièces • Matière : PEEK •  PAI (Polyamide-imide) 1,2 gramme

  6. IBL Fitting

  7. IBL piping • To help LAPP team (IN2P3) • Design tools to protect transfert lines • Date : end of 2013 to june 2014

  8. Routing in IDEPSide C. Flexible tubes (18mm OD) Stiff tubes (14mm OD) 14x 3mm OD tubes bundled in insulation 13mm bundle diameter + 13mm insulation (40mm OD) Foam box with vacuum terminal and concentric split Designed by Eric Richards, Atlas PO

  9. Routing in IDEPSide A. Flexible tubes (18mm OD) Foam box with vacuum terminal and concentric split Stiff tubes (14mm OD) 14x 3mm OD tubes bundled in insulation 13mm bundle diameter + 13mm insulation (40mm OD) Designed by Eric Richards, Atlas PO

  10. Vacuum terminals and concentric splitting in IDEP Vacuum lines Ca 90 cm IBL Flattened out tubes in between 25mm foam plates compressed by plates and stand-offs Bundle wrapped in aluminum tape with 13mm insulation thickness (2x13+14=50mmOD) IDEP CAD integration: Erik Richards

  11. Next • Banc test : • Circuit Glycol + water -> CO² ? https://indico.cern.ch/conferenceDisplay.py?confId=272541 • Thermal mockup ? • X0 : • contact with CMS at CERN • Design / simulation • Cartigny(with CPPM) : a new pixel with IBL staves to 2020 • New design :? • A lot of ideas : https://indico.cern.ch/conferenceDisplay.py?confId=233332

More Related