1 / 6

Voiceband Data Media Format Slide Deck #2

Voiceband Data Media Format Slide Deck #2. draft-foster-mmusic-vbdformat-01.txt Bill Foster, Rajesh Kumar, Flemming Andreasen Cisco Systems. Problem Context. Definition of VBD: Modulated modem and fax signals Usually uses PCMU, PCMA, G726-32, G726-40 etc.

bunme
Download Presentation

Voiceband Data Media Format Slide Deck #2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Voiceband Data Media FormatSlide Deck #2 draft-foster-mmusic-vbdformat-01.txt Bill Foster, Rajesh Kumar, Flemming Andreasen Cisco Systems Voiceband Data Media Format Slide 1 Rajesh Kumar, Cisco Systems

  2. Problem Context • Definition of VBD: Modulated modem and fax signals • Usually uses PCMU, PCMA, G726-32, G726-40 etc. • With FEC (RFC 2733), G726-32 adequate for low speed modems. Can use instead of more complex modem relay. • Voice and VBD – different characteristics and resource requirements • Jitter Buffer • Packet Loss Concealment • Problem • Discrimination between, e.g., PCMU for voice and PCMU for VBD • Needs • New encoding format (new MIME) audio/vbd • MIME parameter to determine underlying encoding e.g. PCMU. PCMA, G726-32, G726-40 etc. • Should support any underlying encoding that works • Representation in SDP and H.245 Voiceband Data Media Format Slide 2 Rajesh Kumar, Cisco Systems

  3. Changes to internet draft from 00 to 01 • Feedback: Make definition consistent with draft-ietf-avt-rtp-mime • Response: Changed “VBD” from a format-specific parameter to a new (proposed) audio MIME subtype • Makes the definition consistent with draft-ietf-avt-rtp-mime • Feedback: Flexible association of VBD with different “underlying” audio encodings • Response: Format-specific parameter for VBD defines underlying encoding • Next Steps: Collect inputs on AVT and MMUSIC groups and progress towards standardization Voiceband Data Media Format Slide 3 Rajesh Kumar, Cisco Systems

  4. Describing the VBD format m=audio 3456 RTP/AVP 15 98 99 a=rtpmap:98 vbd/8000 a=fmtp:98 0 a=rtpmap:99 vbd/8000 a=fmtp:99 8 m=audio 3456 RTP/AVP 15 98 a=rtpmap:96 G726-40/8000 a=rtpmap:98 vbd/8000 a=fmtp:98 96 PT 96 not on ‘m=‘ line Voiceband Data Media Format Slide 4 Rajesh Kumar, Cisco Systems

  5. Describing the VBD format (Cont’d) m=audio 3456 RTP/AVP 15 98 100 a=rtpmap:98 vbd/8000 a=fmtp:98 0 a=rtpmap:100 red/8000 a=fmtp:100 98/98 Voiceband Data Media Format Slide 5 Rajesh Kumar, Cisco Systems

  6. MIME proposal MIME media type name: audio MIME subtype name: vbd Required parameters: rate: The RTP timestamp clock rate, which is equal to the sampling rate. The typical rate is 8000, but other rates may be specified. baseAlgorithm: The encoding scheme, such as PCMU, PCMA, G.726-32, G726-40 etc., used. No MIME parameters are inherited. Optional parameters: channels, ptime, maxptime (Refer to draft-ietf-avt-rtp-mime-06.txt ). Security considerations: See Section 5 of draft-ietf-avt-rtp-mime-06.txt. Intended usage: Modulated facsimile and modem signals that benefit from special handling e.g. jitter buffer adjustment at a receiver. Voiceband Data Media Format Slide 6 Rajesh Kumar, Cisco Systems

More Related