1 / 23

COMPANDING

COMPANDING. - is the process of compressing and then expanding

cachet
Download Presentation

COMPANDING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. COMPANDING • - is the process of compressing and then expanding • with companded system, the higher amplitude analog signals are compressed - (amplified less than the lower- amplitude signals) prior to transmission and then expanded ( amplified more than the lower amplitude signals in the receiver).

  2. TYPES OF COMPANDING • 1. Analog Companding • a.  - Law • b. A - Law • 2. Digital Companding

  3. PCM SYSTEM WITH ANALOG COMPANDING

  4. µ-LAW COMPANDING Vmax ln(1 + µ{Vin /Vmax}) Vout = ln(1 + µ) Where: Vmax =maximum uncompressed analog input amplitude (volts) Vin = amplitude of the input signal at particular instant of time (volts) µ = parameter used to define the amount of compression(unitless) Vout = compressed output amplitude (volts)

  5. µ-LAW CHARACTERISTIC

  6. A-LAW COMPANDING • In Europe, the ITU-T has established A-law companding to be used to approximate true logarithmic companding AVin /Vmax Vin 1 Vout = 0 ≤ ≤ Vmax Vmax A 1 + lnA 1 + ln(AVin /Vmax) 1 Vin Vout = ≤ ≤ 1 Vmax A Vmax 1 + lnA

  7. DIGITALLY COMPOUNDED PCM SYSTEM

  8. µ-255 COMPRESSION CHARACTERISTIC - µ-law companding is a system that divides the analog signal range into fifteen segments each eventually encoded into eight-bit digital value.

  9. 13 SEGMENT SCALE

  10. µ-255 COMPRESSION CHARACTERISTIC

  11. 8-BIT COMPRESSED CODE FORMAT

  12. µ-255 ENCODING TABLE

  13. µ-255 DECODING TABLE

  14. PROCESS OF DIGITAL COMPRESSION • Digitally, the 12-bit values are encoded into 8-bit compressed code as follows: • 1. Retain the sign bit as the first bit of the 8-bit code. • 2. Count the number of zeros until the occurrence of the first 1 bit. Subtract the zero count from 7. This is the segment number. • 3. The first occurrence of 1 is assumed during the expanding process, so it is set aside during compression. • 4. Copy the next four bits (ABCD) into the 8-bit compressed code.

  15. EXAMPLE • Code the 12-bit code 100001011010 into an 8-bit compressed µ-law code.

  16. EXAMPLE • Determine the 12-bit linear code, the eight-bit compressed code, the decoded 12-bit code, the quantization error, and the compression error for a resolution of 0.01 V and analog sample voltages of • (a) + 0.053 V • (b) -0.318 V • (c) +10.234 V

  17. PROCESS OF DIGITAL EXPANSION Expanding back digitally, reverses the process: • 1. Retain the sign bit. • 2. Take the segment number, subtract from 7 and add that many 0s. • 3. Make the next bit a 1. • 4. The next bits are ABCD values. • 5. Add a 1 and sufficient 0s to complete the 12-bit value.

  18. WORK Examples • For the following 12-bit linear PCM codes, determine the eight-bit compressed code to which they would be converted: • a. 100011110010 • b. 000001000000 • c. 000111111000 • d. 111111110010 • e. 000000100000

  19. WORK • For the following 8-bit compressed codes,determine the expanded 12-bit code. • a. 11001010 • b. 00010010 • c. 10101010 • d. 01010101 • e. 11110000 • f. 11011011

  20. WORK • A 12-bit linear sign-magnitude PCM code is digitally compressed into 8 bits. For a resolution of 0.016 V, determine the following quantities for the indicated input voltages: • a. 12-bit linear PCM code • b. eight-bit compressed code • c. decoded 12-bit code • d. decoded voltage • For Vin = -6.592 V, +12.992 V, -3.36 V

  21. PCM problems Determine the signal-to-quantization noise ratio in dB, if an audio signal with a bandwidth of 3.2 kHz is converted to PCM signal by sampling at 8 kilosamples/sec and with a data rate of 64 kbps.

  22. Line Encoding

More Related