1 / 52

Wireless networking

Wireless networking. Unit objectives Identify the hardware components needed to create a wireless connection Differentiate between the various communications standards used in wireless networks Install and configure a wireless network connection . Topic A. Topic A: Wireless network devices

cais
Download Presentation

Wireless networking

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Wireless networking Unit objectives • Identify the hardware components needed to create a wireless connection • Differentiate between the various communications standards used in wireless networks • Install and configure a wireless network connection

  2. Topic A • Topic A: Wireless network devices • Topic B: Wireless networking standards • Topic C: Wireless configuration

  3. Wireless • Technologies and systems that don’t use cables for communication • Examples • Public radio • Cellular telephones • One-way pagingSatellite • Infrared • Private, proprietary radio • Wireless networks – LAN or WAN

  4. Wireless connections • Can link devices • Methods • Infrared • Radio • Bluetooth • Infrared and Bluetooth • Create wireless connection between two devices • Radio technology • Forms larger wireless network

  5. Infrared • Uses pulses of invisible infrared light to transmit signals • Low-speed, line-of-sight connection • Can’t pass through obstructions or around corners • 9600 bps to 4 Mbps data rate • 10-20 feet maximum range • Devices must aim their transceivers at each other (line-of-sight technology) continued

  6. Infrared, continued • No more than a 45 degree angle • Most popular form: Infrared Serial Data Link technology • Serial connection • 1.5 Mbps • 20 foot range • Often found on laptops and PDAs

  7. Radio • Signals sent over electromagnetic radio waves • Can pass through most nonmetallic obstructions and around corners • Not a line-of-sight technology • Offers moderate- to high-speed local and wide area connections • Most common technologies: • 802.11b • 802.11g continued

  8. Radio, continued • 10 Mbps • Sometimes called RF technologies • RF stands for radio frequency • RF devices have antennae

  9. Bluetooth • Short-distance radio (up to 10 meters) • Developed by the Bluetooth Special Interest Group • Includes over 1,000 companies • Siemens, Intel, Toshiba, Motorola, and Ericsson • Enables devices to discover other Bluetooth devices within range • Devices self-configure and begin communicating continued

  10. Bluetooth, continued • Shouldn’t need to configure communication parameters • Bluetooth devices have antenna often hidden inside the device

  11. Wireless communications • Enables users to • Make Internet connection while traveling • Connect to network while moving about house or office • Important technology for • Mobile devices • Internet access in remote locations • Three types of wireless links • Indoor point-to-multipoint LANs • Outdoor point-to-point links • Outdoor point-to-multipoint links

  12. Indoor point-to-mulitpoint LANs

  13. Outdoor point-to-point links

  14. Outdoor point-to-multipoint links

  15. Wireless connection components • Requires • Wireless network card in the computer • Wireless router or wireless access point device on the network • Router or WAP broadcasts radio signals • Wireless network cards pick up the broadcasts

  16. Wireless NICs

  17. Wireless access points

  18. Wireless speeds • Distance and data rate affected by • Obstructions within building • Environment noise • Recommend wireless LAN access points within 60 to 90 meters of wireless clients

  19. WAP placement • Informal site survey • Temporary installation WAPs • Use wireless client to test signal • Use actual locations for clients • Formal site survey • Use field-strength measuring equipment • Install test antenna in the estimated WAP locations • Strength of test signal at various points within the range the WAP will service • Move test antenna to obtain the best possible signal for the wireless coverage area

  20. Activity A-1 Examining wireless devices

  21. Topic B • Topic A: Wireless network devices • Topic B: Wireless networking standards • Topic C: Wireless configuration

  22. Standards • Frequency bands divisions • Military • Broadcasters • Amateur radio operators • Broadcast signal is a security issue • IEEE standards 802.1x and 802.11

  23. 802.1x standard • Port-based, authentication framework for access to Ethernet networks • Designed for wired Ethernet networks • Applies to 802.11 WLANs • Requires three roles in authentication process • Device requesting access • Authenticator • Authentication server • Allows multiple authentication algorithms • Is an open standard

  24. 802.11 standard • Operates in the 2.4 through 2.5GHz band • Used for wireless networks • OSI Data Link layer • Two ways to configure a network • Ad-hoc • Infrastructure • Places specification on Physical and MAC layers

  25. Access point • Transparent bridge between wireless clients and wired network • Includes • At least one interface to connect to the existing wired network • Transmitting equipment to connect with wireless clients • IEEE 802.1D bridging software

  26. 802.11a 802.11b 802.11c 802.11d 802.11e 802.11F 802.11g 802.11h 802.11i 802.11j 802.11k 802.11l 802.11m 802.11n 802.11 WLAN standards

  27. Wireless protocols • Wi-Fi (Wireless Fidelity) • IEEE 802.11b: 11 Mbps; 2.4 GHz band • IEEE 802.11g: 20+ Mbps; 2.4 GHz band; transmission range of up to 35 meters • Experience interference from other common household devices • Bluetooth • Short-range: about 100 meters or less • Low speeds: 721 Kbps continued

  28. Wireless protocols, continued • 802.11a • Improved version of original Wi-Fi • 54 Mbps; 5 GHz band • Indoor range of up to 35 meters • Not compatible with 802.11b devices • WiMAX (IEEE 802.16 Air Interface Standard) • Point-to-multipoint broadband access • 10-66 GHz licensed • 2-11 GHz unlicensed • 70 Mbps • 31 miles; direct line-of-site

  29. LAN technologies • IEEE 1394 • FireWire (Sony) and iLink (Apple) • Main use: video and graphics transfers • Serial protocol • FireWire 400: 100 to 400 Mbps • FireWire 800: up to 800 Mbps • USB • Bidirectional serial interface • Main use: connect peripheral devices • USB 1.1: 1 to 12 Mbps • USB 2.0: 480 Mbps

  30. Wi-Fi • Called AirPort. 802.11b • Frequency range of 2.4 GHz • Distance range of about 100 meters • Up to 11 Mbps • Range depends on type of signal obstructions between transmitter and receiver • 802.11b – popular and inexpensive network solution • Many cordless phones use the 2.4-GHz frequency and can interfere with 802.11b network

  31. Bluetooth • Standard for short-range wireless communication and data synchronization between devices • Transmitters and receivers are application-specific integrated circuits (ASICs) • Can transmit data at rates as high as 721 Kbps • Up to three voice channels available • Easy to configure

  32. 802.11a/802.11g • 802.11a • 5.0-GHz band • Isn’t compatible with 802.11b • 50 meters max between AP and client • Faster than 802.11b • Doesn’t encounter interference from 2.4 MHz devices • 802.11g • 2.4-GHz band • Backwards compatible with 802.11b • 54 Mbps

  33. WiMAX • Worldwide Interoperability of Microwave Access • Wireless DSL and T1-level service • Emerging Wide Area and Metropolitan Area Networks technology standard • Enables 802.16e devices to roam between current wireless hot spots • Coverage measured in square miles • Doesn’t rely on line-of-sight for connection

  34. Activity B-1 Comparing wireless networking standards

  35. Topic C • Topic A: Wireless network devices • Topic B: Wireless networking standards • Topic C: Wireless configuration

  36. WLAN security risks • Devices can be lost or stolen • Session hijacking • Man-in-the-middle attacks • Rogue AP • WAP no default security • Broadcasts make breaking in easy • IEEE and WECA developed standards for user authentication and media access control

  37. Additional risks • Detectable radio-frequency traffic • Data is passed in clear text form • Encryption isn’t always strong • WEP • One-way authentication mechanism • One-way open broadcast client connection • Wardriving • Warchalking

  38. WLAN security components • Access control • Turn off SSID broadcasts • Enable a MAC filter on your AP • Encryption • Clients and AP use same encryption scheme • Clients must possess correct encryption key • Wireless encryption systems vary in ability to keep data secure continued

  39. WLAN security, continued • Authentication • Server authenticates clients • Stronger access control protection than SSID hiding or MAC filtering • Should still use encryption • Isolation • Segregates network traffic • Two types: wireless client isolation (AP isolation) and network isolation • Network isolation through custom routing • Isolation through your general network design and firewall configuration

  40. Transmission encryption • Wired Equivalent Privacy (WEP) • Wi-Fi Protected Access (WPA) Personal • WPA2 • WPA Enterprise • RADIUS • 802.11i

  41. 802.1x authentication

  42. Activity C-1 Identifying the technology used to implement WLANs

  43. Wireless access point configuration • Assign a service set identifier (SSID) • Clients use the SSID to distinguish between WLANs • AP typically broadcasts the SSID • Broadcasts identify the security mechanisms to enable clients to auto-configure connections

  44. Securing your AP • Set most secure encryption method compatible with clients • Change AP default admin passwords • Change default SSID • Disable SSID broadcasts • Separate wireless network from wired network • Put wireless network in an Internet-access only zone or DMZ continued

  45. Securing your AP, continued • Disable DHCP within WLAN • Enable MAC address filtering on AP • Enable 802.1x • Periodically survey site with wireless sniffing tool

  46. Activity C-2 Configuring a wireless access point (instructor demo)

  47. Wireless clients • Submit its credentials to the Authenticating server • Secured or 802.1x authenticated connections • Wireless AP issues a challenge to the client • AP sets up restricted channel allowing client to communicate only with RADIUS server • RADIUS server accepts only trusted AP connections • RADIUS server validates the client credentials • Transmits client master key to wireless AP

  48. Wireless Auto Configuration • Dynamically selects wireless network connection attempt • Based on • Configured preferences • Default settings • Wireless Zero Configuration • Windows Vista • Windows XP • Windows 2000 with download • Automatically configures address items: • TCP/IP settings, • DNS server addresses • IAS server addresses

  49. Auto Configuration, continued • IEEE 802.1x authentication defaults • Infrastructure before ad hoc mode • Computer authentication before user authentication. • If NIC is preconfigured with WEP shared key, attempts to perform IEEE 802.11 shared key authentication; otherwise NIC reverts to open system authentication

  50. Windows CE wireless clients • Windows CE .NET palm-top computers include Wireless Zero Configuration • Manual configuration options similar to those found on Windows Vista and Windows XP • Supports 802.11a and Native Wireless Fidelity (Wi-Fi) • Non-.NET palm-tops wireless configuration is like Windows 2000

More Related