1 / 7

Side plate tooling in progress

Design for tooling and manufacturing review Suggestions for DFM, proposed gate, parting, and ejector pin locations. Side plate tooling in progress.

caitlyn-kinnerk
Download Presentation

Side plate tooling in progress

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Design for tooling and manufacturing reviewSuggestions for DFM, proposed gate, parting, and ejector pin locations.

  2. Side plate tooling in progress

  3. The reflector should be manufactured of a cost effective plastic suitable for vacuum metallization, ABS would be suitable. Material not specified on drawing. Lens must be optical grade PC, so we suggest two tools so we can use different materials. The cost of optical PC does not justify tool savings to use one tool for both parts with forecast production volumes. The reflective coating should be durable and provide an optical quality mirror finish on the four surfaces specified on the reflector drawing. Other surfaces to be masked off. We recommend exterior use plating for weather protection. Although this is not exterior application it may be subject to temperature and humidity extremes. Incremental cost is approx. $.04 for exterior grade plating. Part volume: 8.27 cc estimated Regarding body: For the prototype, we suggest we make in two different parts and combine them together with glue? Production tooling reviewLED Reflector

More Related