1 / 3

2910 Rev. 2.0 Advancing Keithley’s Technical Leadership

2910 Rev. 2.0 Advancing Keithley’s Technical Leadership. More Capability. Key Enhancements New Modulation Signals Flexible Digital Modulation & GPS Increase ARB memory from 64 Msa to 100 Msamples Many waveforms, switch between them quickly (3 msec via. GPIB) ARB Sequencing

cally-barton
Download Presentation

2910 Rev. 2.0 Advancing Keithley’s Technical Leadership

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2910 Rev. 2.0Advancing Keithley’s Technical Leadership MoreCapability Key Enhancements • New Modulation Signals • Flexible Digital Modulation & GPS • Increase ARB memory from 64 Msa to 100 Msamples • Many waveforms, switch between them quickly (3 msec via. GPIB) • ARB Sequencing • FASTER measurements, more flexibility • Power Calibration Table • Power vs. frequency correction • SCPI command pass-through • For KI 3500 Power Meter • Signal Meister licensing • Long-term strategy to provide signal waveforms • Automatic Re-sampling when downloading waveforms • Easier to use and save time • High precision trigger • “Sync Now” & “Trigger Now” buttons & SCPI commands • Improved ACPR performance • From -59 dBc to -66 dBc characteristic for W-CDMA Higher Performance Faster Easier to Use

  2. Upgrading 2910 Rev. 1.0 to Rev. 2.0 • Firmware-only upgrade • Available at no cost • No hardware changes required • Re-calibration is not necessary • Will improve ACPR spec (e.g., ~6 dB for W-CDMA) • Re-calibration is not available for free. • Will require obtaining a 2910-ALG license • Free to existing 2910 Rev. 1.0 customers • Customers can do it themselves……however, we’d like a local Service or Application Engineers to do the upgrade. (An internal memo will be sent out.)

  3. April 2007 Single-Port Interface (2810-SPI option)Improves Convenience and Accuracy Rear-panel RF input Rear-panel RF output To VSA KI 2810 VSA From VSG RF I/O KI 2910 VSG Broadband coupler(inside of 2810 VSA chassis) Front-panel RF input & output port CalibrationReference Plane Bi-directional RF I/O Transceiver under Test • Power Calibration Table • Transfer power meter accuracy to VSA & VSG(Power values corrected to Reference Plane) • Up to 10 points per table • Multiple table files per band or test fixture KI 3500 PM SCPI pass-through mode allows PC to control 3500 Power Meter via USB port

More Related