170 likes | 317 Views
Configuring Linksys Wireless Ethernet Bridge. Prof. Yousif @ Valencia Community College. Wireless Ethernet Bridge. Home Page Default Address 192.168.1.225. Enable LAC#5. The default SSID is “linksys” unless a beacon is heard with a different SSID. Basic Configuration.
E N D
Configuring Linksys Wireless Ethernet Bridge Prof. Yousif @ Valencia Community College
Wireless Ethernet Bridge • Home Page • Default Address 192.168.1.225
The default SSID is “linksys” unless a beacon is heard with a different SSID
Basic Configuration Default PW is: admin admin Change to WB#, where “#” refers to your PC number
Basic Configuration Auto sensed from the beacons broadcasted by the Cisco AP
Basic Configuration Must enter GW Address
Web Access: Open your browser and type the address you used during configuration: 10.0.0.3 Make sure that you Ethernet Card is configured to be on the same network
Confirm Association IP Add. Of PC MAC Add. Of W. Bridge
Download the firmware Capture
Install firmware Upgrade Make Sure that you enter the correct IP address of the WB and the correct password