1 / 12

How to Properly Install Cantilever Racking Systems

When it comes to installing custom-designed cantilever racking systems for your facility, itu2019s important to follow the manufactureru2019s instructions and recommendations very closely. Adhere to all safety standards and read the instruction manual carefully before beginning the installation process.

canadianrack
Download Presentation

How to Properly Install Cantilever Racking Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CANADIAN RACK TECHNOLOGIES INC. How to Properly Install Cantilever Racking Systems T: 416-491-7225 T: 905-238-7225 E: info@rack.ca

  2. Read the Assembly Instructions • Manufacturers of cantilever racking systems always provide detailed installation instructions that outline safety standards, regulations, and precautions that should be taken during the process.

  3. Double Check That You Have Everything You Need • Instruction manuals include a list of all of the materials and components that are required to install cantilever racking systems.

  4. Prepare the Space • Clean up the space where the cantilever racking system will be installed. Remove obstructions and potential hazardous materials to eliminate the risk of injury or damages.

  5. Determine the Rack Configuration • Measure the dimensions of the aisle or space where the rack will be located to determine the most optimal setup and positioning of the completed rack.

  6. Inspect the Components • Look for scratches, dents, and signs of abrasion or rust that could hinder the performance of each piece or throw the entire cantilever racking system off balance.

  7. Assemble the Bays One at a Time • Start by laying out the components of each bay on the floor to see how they all fit together. You should have two columns, bases, and the correct number of arms that are required.

  8. Install Additional Bays as Needed • Depending on how much storage space you need and the dimensions of the cantilever racking system, you may need to assemble and install additional bays to complete the structure and support the starter bays.

  9. Install Shelves or Decking • Custom shelving and decking can be added to your cantilever racking system if additional support is required for various load sizes and weights.

  10. Install the Bracing and Anchors • Bracing and anchoring are required to stabilize cantilever racking systems. To maximize stability, brace sets are bolted in between two uprights and anchors are bolted to the ground the secure the structure in place.

  11. Contact Canadian Rack Technologies to Purchase High-Quality Cantilever Racks in Toronto 4075 Gordon Baker Road Toronto, ON Canada M1W 2P4 T: 416-491-7225E: info@rack.ca 1280 Aimco Boulevard Mississauga, ON L4W 1B2 T: 905-238-7225E: info@rack.ca https://rack.ca/contact/

  12. Thank You

More Related