1 / 7

Start the communication with Open Interface and DDTK tool.

Start the communication with Open Interface and DDTK tool. Step1. Make sure that the license key for open interface is downloaded in the CCU. Step2. Make sure that dipswitch settings in the CCU are set for open interface protocol and with the correct baud rate. Step3.

carl
Download Presentation

Start the communication with Open Interface and DDTK tool.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Start the communication with Open Interface and DDTK tool. • Step1. Make sure that the license key for open interface is downloaded in the CCU. • Step2. Make sure that dipswitch settings in the CCU are set for open interface protocol and with the correct baud rate. • Step3. For testing use the CCU_DDTK.exe (can be found on the CD) go into the DDTK directory • REMARKS: • -s1 = comport 1 of the PC • :19200 = the baudrate and must be the same as from the CCU. • -ps = Protocol Simple. Start DDTK

  2. Open Interface and DDTK tool. • Step4. Go to the dos prom and type: CCU_DDTK.exe -s1:19200 –ps • Step5. Open the Open Interface manual to see all available commands. Open Interface Start DDTK

  3. Open Interface and DDTK tool. • Step6. For instance to get the version of the CCU SW type: SC_C_START_APP Open Interface Start DDTK

  4. Open Interface and DDTK tool. • Step7. Type: SC_C_GET_CCU_VERSIONINFO Open Interface Start DDTK

  5. Open Interface and DDTK tool. • Step8. Type: MM_C_START_MON_MM Open Interface Start DDTK

  6. Open Interface and DDTK tool. • Step9. Switch on or off the microphone off a contribution unit (Chairman or delegate) Open Interface Start DDTK

  7. Open Interface and DDTK tool. End of section Start DDTK

More Related