Circular Motion

1. Circular Motion

2. Circular Motion Terms • The point or line that is the center of the circle is the axis of rotation. • If the axis of rotation is inside the object, the object is rotating (spinning). • If the axis of rotation is outside the object, the object is revolving.

3. Linear/Tangential Velocity • Objects moving in a circle still have a linear velocity = distance/time. • This is often called tangential velocity, since the direction of the linear velocity is tangent to the circle. v

4. Rotational/Angular Velocity • Objects moving in a circle also have a rotational or angular velocity, which is the rate angular position changes. • Rotational velocity is measured in degrees/second, rotations/minute (rpm), etc. • Common symbol, w (Greek letter omega)

5. Rotational/Angular Velocity • Rotational velocity = Change in angle time

6. Rotational & Linear Velocity • If an object is rotating: • All points on the object have the same rotational (angular) velocity. • All points on the object do not have the same linear (tangential) velocity.

7. Rotational & Linear Velocity • Linear velocity of a point depends on: • The rotational velocity of the point. • More rotational velocity means more linear velocity. • The distance from the point to the axis of rotation. • More distance from the axis means more linear velocity.

8. Rotational & Linear Velocity • In symbols: v = r w v w r

9. Acceleration • As an object moves around a circle, its direction of motion is constantly changing. • Therefore its velocity is changing. • Therefore an object moving in a circle is constantly accelerating.

10. Centripetal Acceleration • The acceleration of an object moving in a circle points toward the center of the circle. • This is called a centripetal (center pointing) acceleration. a

11. Centripetal Acceleration • The centripetal acceleration depends on: • The speed of the object. • The radius of the circle. Acent = v2 r

12. Centripetal Force • Newton’s Second Law says that if an object is accelerating, there must be a net force on it. • For an object moving in a circle, this is called the centripetal force. • The centripetal force points toward the center of the circle.

13. Centripetal Force • In order to make an object revolve about an axis, the net force on the object must pull it toward the center of the circle. • This force is called a centripetal (center seeking) force. Fnet

14. Centripetal Force • Centripetal force on an object depends on: • The object’s mass - more mass means more force. • The object’s speed - more speed means more force. • And…

15. Centripetal Force • The centripetal force on an object also depends on: • The object’s distance from the axis (radius). • If linear velocity is held constant, more distance requires less force. • If rotational velocity is held constant, more distance requires more force.

16. Centripetal Force • In symbols: mv2 = mrw2 Fcent= r

17. Work Done by the Centripetal Force • Since the centripetal force on an object is always perpendicular to the object’s velocity, the centripetal force never does work on the object - no energy is transformed. Fcent v

18. “Centrifugal Force” • “Centrifugal force” is a fictitious force - it is not an interaction between 2 objects, and therefore not a real force. • Nothing pulls an object away from the center of the circle.

19. “Centrifugal Force” • What is erroneously attributed to “centrifugal force” is actually the action of the object’s inertia - whatever velocity it has (speed + direction) it wants to keep.

20. Rotational Motion of an Object

21. Rotational Motion • All Spinning Objects • Axis of Rotation • The line about which everything rotates. • Speed of Rotation • Period of rotation • The time of a single complete rotation (T) • Frequency of rotation • The number of cycles completed in a given time (f = hertz) • Period = 1/Frequency or Frequency = 1/Period • T= 1/f f=1/T

22. Rotational Motion

23. Spinning • Angular speed •  = s/r ( is measured in radians) • For 360 degreed, s = 2r • 3600 = 2 radians • Angular speed = 2f

24. Spinning • Angular speed •  = s/r ( is measured in radians) • For 360 degreed, s = 2r • 3600 = 2 radians • Angular speed = 2f

25. Torque

27. Angular Momentum • Moment of inertia • In general, the farther away a mass is from the axis the greater its moment of inertia is. • I = kmr2

28. Angular Momentum (Cont.) • Momentum of inertia times angular speed • L = I  • Conservation of Angular momentum • Direction of Rotation • The right hand rule

29. Moment of Inertia • Momentum of inertia equals the resistance to motion • I = mr2 • Moment of Inertia = mass times the distance from the axis squared

30. Angular acceleration

31. Center of GravityCenter of Mass "All of science is nothing more than the refinement of everyday thinking."-- Albert Einstein

32. Center of Gravity • Point of an object located at the average position of weight.

33. Center of Gravity • Point of an object located at the average position of weight.

34. Center of Gravity Point of an object located at the average position of weight.

35. Center of Mass • The Average position of matter

36. Center of Mass • The Average position of matter

37. Center of Mass • The Average position of matter

38. Center of Mass • The Average position of matter

39. Toppling • Toppling occurs when the center of gravity extends beyond the support base.

40. Stability • Unstable – CG is lowered with displacement • Stable – work must be done to raise the CG • Neutral – displacement neither raises or lowers the CG

41. Coriolis “force” • An apparent force that seems to deflect a moving object from its path • Only observed in rotating references • Related to Centifrugal “force”

42. Coriolis “force” • An apparent force that seems to deflect a moving object from its path • Only observed in rotating references • Related to Centifrugal “force”

43. Coriolis “force” • An apparent force that seems to deflect a moving object from its path • Only observed in rotating references • Related to Centifrugal “force”

44. Objects rotate around their center of gravity.

45. Center of Gravity

46. Center of Gravity • Throw a ball through the air and it travels a smooth parabolic path. Throw a bat through the air and it wobbles all over the place (class example: marker). • However if you watch the path of the bat, the middle of it follows the same path that the ball followed. • The bat is a sum of two motions. • A spin around the center point • A movement through the air as if all the weight were concentrated at this point.

47. The Center of Gravity for an object is the point located at the object’s average position of weight. • For a symmetrical object this point would be located at the center • For an irregular shaped object, the center of gravity is toward the heavier end ( i.e. bat)

48. Center of Mass • Center of Gravity is often called Center of Mass, which is the average positions of all the particles of mass that make up an object. • The Center of mass or center of gravity can lie outside of the object (i.e. Donut, tire, banana, chair • Finding center of mass for a 1-D situation. We can use the equation: • Xcm = (m1x1 + m2x2 + …) / (m1 + m2 + …) • 2-D is easy to follow the same trend, but use Ycm as well.

49. Locating the Center of Gravity • Using a plumb line and bob, you can suspend the object from some other point and constructing a second vertical line. The Center of Gravity is where the two lines intersect.

50. Toppling • The rule for Toppling: • If the center of gravity of an object is above the area of support, the object will remain upright. If the Center of Gravity extends outside the area of support, the object will topple. • Example: When a male tries to push a penny with his nose on the floor. The center of gravity extends beyond the supports and he will fall over. • The Leaning Tower of Pisa does not topple over, WHY??